DIN 557 Square Nuts

DIN 557 square nuts, M5 to M16 — the four-sided nut for recesses, channels and antique-look assemblies — with the full collected 8-size table: corner and flat widths, nut and nib heights, and the source's reference mass per 1000 units.

Last updated: 2026-11

Request a Quote

DIN 557 Square Nuts in an industrial setting
Illustrative image redrawn from real DIN 557 Square Nuts product references — not a photograph of stocked items.

Specifications

DIN 557 is the square nut — four flats at 90 degrees instead of six — surviving in modern work for exactly the situations its shape fits: it sits captively in a square recess or channel where a hex nut would rotate in place, its corners give a wrench four positions instead of two in tight quarters, and it is the period-correct choice for restored machinery and architecture. The collected table runs M5 to M16 with the d w bearing-face minimum, e across-corners max/min, the m nut height pair, the m 1 nib height minimum, the s across-flats limits, and the source's reference mass per 1000 units. Where two widths exist for one thread (M10 SW 16, M12 SW 18 — the source's own size labels), the table carries them as separate rows. Note that the source prints "l3" in the M16 m max cell — a printed typo for 13, reproduced verbatim and flagged rather than silently corrected. The washer-faced and heavy square forms belong to other DIN designations; on this site the hex counterpart for general use is DIN 934. Materials, property classes and finishes are not printed by the collected specification and stay per RFQ.

Standard DIN 557 — square nuts
Series M5 – M16 (8 sizes tabulated, including the M10 SW 16 and M12 SW 18 width variants)
Tabulated geometry Per size: pitch P, bearing face d w min, across-corners e max/min, nut height m (max=nominal size / min), nib height m 1 min, across-flats s (max=nominal size / min), reference mass per 1000 units ≈ kg
Head form Square nut — four 90° flats, sits captively in square recesses and channels
Family note Hex counterpart for general use DIN 934; the M16 m max cell prints "l3" in the source (typo for 13 — reproduced verbatim)
Materials / strength Not tabulated by the collected specification — per RFQ (property class and finish per drawing callout)
DIN 557 square nuts - per-size dimensions (M5 - M16)All dimensions in millimeters. Attribute labels follow the source: P = thread pitch; d w = bearing face diameter minimum; e = width across corners max/min; m = nut height max=nominal size / min; m 1 = nib (washer-face) height minimum; s = width across flats max=nominal size / min. The final column is the source's approximate mass per 1000 units in kilograms (reproduced as printed). The source prints "l3" in the M16 m max cell — a printed typo (13) reproduced verbatim and not corrected. Size labels carrying a second width variant (M10 SW 16, M12 SW 18) are reproduced as printed. Materials, property classes and finishes are not tabulated by the collected specification.
Nominal threadP — Pitchd w — mine — maxe — minm — max=nominal sizem — minm 1 — mins — max=nominal sizes — minper 1000 units ≈ kg
M50.86.711.39.9343.522.587.641.31
M618.714.112.5354.523.2109.642.77
M81.2511.518.416.346.55.924.11312.575.5
M101.514.522.620.2487.425.21615.5710.7
M10 SW 161.515.52421.5487.425.21716.5713
M121.7516.525.422.84109.426.61817.5716.3
M12 SW 181.7517.226.924.02109.426.61918.4819.1
M1622233.930.11l312.38.62423.1638.2

Materials

  • Material, property class and finish specified per RFQ — the collected specification table covers geometry and reference mass only

Ordering & documentation

Documents

Shipments of DIN 557 Square Nuts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 557 Square Nuts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 557 Square Nuts), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for DIN 557 Square Nuts: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for din 557 square nuts is 10,000 pieces (applies to the standard sizes and finishes for din 557 square nuts; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 557 square nuts run 3–7 days. Quantities or variants of din 557 square nuts outside the standard range are confirmed at quotation.

Storage & shipping

DIN 557 Square Nuts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 557 square nuts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Why choose a square nut over a hex nut?

For the recess, not for the wrench. A square nut fills a square pocket completely, so it cannot spin while the bolt is tightened from the other side — the standard way to fasten into wooden gates, cast channels and furniture frames without holding the nut. The 90-degree corners also let a wrench re-grip four times per revolution in tight quarters. What you give up: a hex nut loads six flats instead of four, so corner wear and rounding starts sooner under the same torque, and modern torque specs are written around hex series s values — match the s column to your tooling, not the other way round.

What is the MOQ and lead time for this nut type?

The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common diameters in this nut type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

What is the MOQ and lead time for DIN 557 Square Nuts?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for DIN 557 Square Nuts state?

State the full designation (DIN 557), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 557 Square Nuts inquiry

  • ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
  • ✓ State the nut property class or material and the bolt class/material it must be paired with.
  • ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
  • ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
  • ✓ Factory-direct pricing for your DIN 557 Square Nuts
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.