ISO 7035 Hexagon Slotted Castle Nuts

ISO 7035 hexagon slotted castle nuts M4 to M100x6, coarse with fine-pitch alternates — the slotted crown that locks against a split pin, with the collected da/de/dw/e/m/n/s/w rows and DIN 94 split-pin pairings.

Last updated: 2026-11

Request a Quote

ISO 7035 Hexagon Slotted Castle Nuts in an industrial setting
Illustrative image redrawn from real ISO 7035 Hexagon Slotted Castle Nuts product references — not a photograph of stocked items.

Specifications

The castle nut is the mechanical lock that never wears out: slots cut across the crown mate with a cross-drilled split pin, so the nut cannot back off regardless of vibration — and unlike a prevailing-torque nut it can be backed off and re-cottered indefinitely, which is why linkage pins, kingpins, rotating-machine shafts and anything with a through-hole bolt still spec them. The collected ladder is the widest on this page: M4 to (M18) then M20 to (M45) then the large fine-pitch band M48 to M100x6, with the source's stacked coarse/fine-pitch header rows carried verbatim (blank columns where a pitch variant shares the geometry). Key rows: height m nominal=max. (5 → 100 across the ladder), wrench height m' min., slot width n min./max., width across flats s nominal=max. (7 → 145), castle-collar depth w, and the source's own split-pin pairing row ("Split pin as in DIN 94": 1x10 at M4 → 13x160 at M100x6). Verbatim quirks are flagged: the M20 split-pin cell prints 4,36 where the ladder pattern reads 4x36, the (M22) header row carries a stray bracket, and the large band's P row prints "-" throughout — pitch for M72x6 and up is per RFQ. Property class, material and finish are not tabulated — per RFQ.

Standard ISO 7035 — hexagon slotted castle nuts (split-pin lock, re-cotterable)
Size range M4 – (M18), M20 – (M45), M48 – M100x6; fine-pitch alternates per the source's stacked headers
Height m nominal=max. 5 → 100 (min. 4,7 → 98,6); wrench height m' min. 2,3 → 62,5
Hex s nominal=max. 7 → 145 (min. 6,78 → 142,5); e min. 7,66 → 161,02
Slot / collar n min. 1,2 → 14; w min. 2,9 → 79,26
Split pin "Split pin as in DIN 94" row: 1x10 (M4) → 13x160 (M100x6); M20 cell prints 4,36 verbatim (flagged)
Flagged verbatim (M22) header stray bracket; P row '-' across the M72x6 – M100x6 band — pitch per RFQ there
Material / class / finish Not tabulated by the collected specification — per RFQ
ISO 7035 hexagon slotted castle nuts - attribute rows M4 - (M18), coarse with fine-pitch alternatesAll dimensions in millimetres. The source stacks three size header rows (coarse size, 1st fine-pitch alternate, 2nd fine-pitch alternate) with blank cells under variants that share the geometry - the grid is reproduced verbatim without merging, so a size column is filled only where the source prints it. Attribute labels: P = pitch, da = abutment, de/dw = bearing diameters, e = across corners, m = height, m' = wrench height min., n = slot width, s = width across flats, w = castle-collar depth; the last row names the matching split pin (DIN 94).
Thread dM4M5M6(M7)M8M10M12(M14)M16(M18)
----M8x1M10x1M12x1,5(M14x1,5)M16x1,5(M18x1,5)
-----M10x1,25M12x1,25--(M18x2)
P0,70,8111,251,51,75222,5
damin.456781012141618
max.4,65,756,757,758,7510,81315,117,319,5
demax.------161718192225
min.------15,5716,5717,5718,4821,4824,3
dwmin.5,86,88,89,511,314,315,316,217,219,220,222,224,8
emin.7,668,7911,0512,1214,3817,7718,920,0321,123,3524,4926,7529,56
mnominal=max.567,589,51215161921
min.4,75,77,147,649,1411,5714,5715,5718,4820,16
m´min.2,333,84,24,96,17,78,29,811,2
nmin.1,21,4222,52,83,53,54,54,5
max.1,451,652,252,252,753,053,83,84,84,8
snominal=max.781011131617181921222427
min.6,787,789,7810,7312,7315,7316,7317,7318,6720,6721,6723,6726,16
wmin.2,93,74,75,26,147,649,6410,5712,5714,57
max.3,2455,56,5810111315
Split pin as in DIN 941x101,2x121,6x141,6x142x162,5x203,2x223,2x254x284x32
  • Row 6 (de): the de rows print '-' across M4-M10 (the collar exists only from M12 up per the source) and the fine-pitch variant columns carry their own values from M12 - carried verbatim
ISO 7035 hexagon slotted castle nuts - attribute rows M20 - (M45), coarse with fine-pitch alternatesAll dimensions in millimetres; reading notes as the M4-(M18) table. The source's third header row for this band carries (M22x2) with a stray closing bracket and '-' cells for the sizes that have only two pitches - verbatim.
Thread dM20(M22)M24(M27)M30(M33)M36(M39)M42(M45)
M20x2(M22x1,5)M24x2(M27x2)M30x2(M33x2)M36x3(M39x3)M42x3(M45x3)
M20x1,5M22x2)--------
P2,52,5333,53,5444,54,5
damin.20222427303336394245
max.21,623,825,929,232,435,638,942,145,448,6
demax.2830323438424650555862
min.27,329,331333741454953,856,860,8
dwmin.27,729,531,333,23842,746,651,155,960,664,7
emin.32,9535,0337,2939,5545,250,8555,3760,7966,4471,376,95
mnominal=max.22262730333538404648
min.21,1625,1626,1629,16323437394547
m´min.11,913,514,216,618,219,821,923,525,927,5
nmin.4,55,55,55,5777799
max.4,85,85,85,87,367,367,367,369,369,36
snominal=max.3032343641465055606570
min.29,1631333540454953,858,863,168,1
wmin.15,5717,5718,4821,4823,4825,4828,4830,2833,3835,38
max.16181922242629313436
Split pin as in DIN 944,365x365x405x456,3x506,3x566,3x636,3x718x718x80
  • Row 10 (m): the split-pin pairing cell at M20 prints 4,36 where the ladder's pattern reads 4x36 (a lost 'x'); carried verbatim
  • Row 19 (Split pin as in DIN 94): the third size header row prints 'M22x2)' with a stray closing bracket and the M24+ alternates stop at two pitches ('-') - all verbatim
ISO 7035 hexagon slotted castle nuts - attribute rows M48 - M100x6, fine-pitch large bandAll dimensions in millimetres; reading notes as the earlier tables. This band's size headers are fine-pitch designations (M72x6 etc. with x4 alternates); the source's P row prints '-' for the whole M72x6 - M100x6 run.
Thread dM48(M52)M56(M60)M64(M68)M72x6(M76x6)M80x6(M85x6)M90x6M100x6
M48x3(M52x3)M56x4(M60x4)M64x4(M68x4)M72x4(M76x4)M80x4(M85x4)M90x4M100x4
P555,55,566------
damin.4852566064687276808590100
max.51,856,26164,869,173,477,882,186,491,897,2108
demax.65707580859095100105110120130
min.63,868,873,878,883,688,693,698,6103,6108,6118,6128,4
dwmin.69,474,278,783,488,292,997,7102,4107,2111,9121,1135,4
emin.82,688,2593,5699,21104,86110,51116,16121,81127,46133,11144,08161,02
mnominal=max.5054576366697376798892100
min.4952,855,861,864,867,871,874,877,886,690,698,6
m´min.29,132,334,737,139,341,744,947,349,752,956,162,5
nmin.999111111111111141414
max.9,369,369,3611,4311,4311,4311,4311,4311,4314,4314,4314,43
snominal=max.7580859095100105110115120130145
min.73,178,182,887,892,897,8102,8107,8112,8117,8127,5142,5
wmin.37,3841,3844,3847,3850,2653,2657,2660,2663,2667,2671,2679,26
max.384245485154586164687280
Split pin as in DIN 948x808x908x10010x10010x10010x11210x11210x12510x14013x14013x14013x160
  • Row 2 (P): the P row prints '-' across the entire M72x6 - M100x6 band while the size labels are x6/x4 designations - pitch values absent from the collected page (per RFQ)

Materials

  • Property class and finish specified per RFQ — castle nuts are commonly class 5/8/10 steel with the class matched to the bolt; state the bolt class and the split-pin size you cotter with (the DIN 94 row is the source's own pairing) at quotation, and confirm pitch on the large fine-pitch band where the capture prints no P values

Ordering & documentation

Documents

Shipments of ISO 7035 Hexagon Slotted Castle Nuts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 7035 Hexagon Slotted Castle Nuts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ISO 7035 Hexagon Slotted Castle Nuts), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for ISO 7035 Hexagon Slotted Castle Nuts: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for iso 7035 hexagon slotted castle nuts is 10,000 pieces (applies to the standard sizes and finishes for iso 7035 hexagon slotted castle nuts; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for iso 7035 hexagon slotted castle nuts run 3–7 days. Quantities or variants of iso 7035 hexagon slotted castle nuts outside the standard range are confirmed at quotation.

Storage & shipping

ISO 7035 Hexagon Slotted Castle Nuts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 7035 hexagon slotted castle nuts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Castle nut or all-metal prevailing-torque nut — which lock does my joint want?

A through-hole. The castle nut's lock needs a cross-drilled bolt and a split pin: it cannot back off (the pin physically blocks rotation), it survives full back-off and re-tightening indefinitely (re-align the slots, re-cotter — the DIN 94 pairing row gives the pin size per nut), and it adds no running friction at assembly. The all-metal prevailing-torque nut (this catalog carries ISO 7042) needs no hole and no pin, but it grips by elastic thread pinch, its torque varies on reassembly, and hot cycles age the clamp. So: linkage pins, steering and suspension kingpins, rotating shafts — anywhere you can drill the bolt and want a lock you can service — run the castle. The collected ISO 7035 ladder spans M4 to M100x6, including the fine-pitch alternates per size. Reading cautions carried from the capture: the M20 split-pin cell prints 4,36 (pattern reads 4x36 — flagged), the (M22) header carries a stray bracket, and the large band's pitch row prints "-" for M72x6 – M100x6 — confirm those per RFQ. Class, material and finish per RFQ as always.

What is the MOQ and lead time for ISO 7035 Hexagon Slotted Castle Nuts?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for ISO 7035 Hexagon Slotted Castle Nuts state?

State the full designation (ISO 7035), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ISO 7035 Hexagon Slotted Castle Nuts inquiry

  • ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
  • ✓ State the nut property class or material and the bolt class/material it must be paired with.
  • ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
  • ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
  • ✓ Factory-direct pricing for your ISO 7035 Hexagon Slotted Castle Nuts
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.