DIN 6915 High-Strength Hex Nuts for Structural Bolting

DIN 6915 high-strength hex nuts for structural bolting, M12 to M36 — the HV-system partner nut of DIN 6914 large-head structural bolts — with the full collected 8-size table: widths across corners and flats, nut heights, and the source's reference mass per 1000 units.

Last updated: 2026-11

Request a Quote

DIN 6915 High-Strength Hex Nuts for Structural Bolting in an industrial setting
Illustrative image redrawn from real DIN 6915 High-Strength Hex Nuts for Structural Bolting product references — not a photograph of stocked items.

Specifications

DIN 6915 is the nut of the European structural HV bolting system: it pairs with DIN 6914 large-head structural bolts and the EN 14399-4/-6 washer line, where the connection is preloaded by the turn-of-nut method and every component in the set — bolt, nut, washer — is matched for strength and ductility. It is visibly taller than a standard hex nut of the same thread, and its widths across flats run one size larger than the DIN 934 dimension series — an M20 structural nut takes a 30 mm socket, not a WAF 30 confusion to be checked against the table. The collected table runs M12 to M36 with the e across-corners minimum, the m nut height (nominal and minimum), the s across-flats limits, and the source's reference mass per 1000 units — the figure a steelwork estimator prices a connection from. The DIN 6916 washer and the DIN 6914 bolt pages on this site complete the set. The 10K/8S property classes of the HV system are not tabulated on the collected page and stay per RFQ, as do materials and finishes.

Standard DIN 6915 — high-strength hex nuts for structural bolting (HV-system partner nut)
Series M12 – M36 (8 sizes tabulated)
Tabulated geometry Per size: pitch P, across-corners e min, nut height m (max=nominal size / min), across-flats s (max=nominal size / min), reference mass per 1000 units ≈ kg
System pairing Pairs with DIN 6914 large-head structural bolts and the DIN 6916 / EN 14399-6 chamfered washer line; preloaded connections per the HV system
Materials / strength Not tabulated by the collected specification — per RFQ (the HV 10K/8S class pairing is confirmed at quotation)
DIN 6915 high-strength hex nuts for structural bolting - per-size dimensions (M12 - M36)All dimensions in millimeters. Attribute labels follow the source: P = thread pitch; e = width across corners minimum; m = nut height max=nominal size / min; s = width across flats max=nominal size / min. The final column is the source's approximate mass per 1000 units in kilograms (printed as a reference figure — reproduced as printed). Materials, property classes (the 10K/8S HV pair is not tabulated on the collected page) and finishes stay per RFQ.
Nominal threadP — Pitche — minm — max=nominal sizem — mins — max=nominal sizes — minper 1000 units ≈ kg
M121.7523.91109.642221.1623.3
M16229.561312.32726.1644.8
M202.535.031614.9323173.9
M222.539.551816.93635104
M24345.22018.74140163
M27350.852220.74645224
M303.555.372422.75049300
M36466.442927.76058.8515

Materials

  • Material, property class and finish specified per RFQ — the collected specification table covers geometry and reference mass only
  • HV-system class pairing (10K nut with 10.9 bolt / 8S with 8.8) confirmed at quotation

Ordering & documentation

Documents

Shipments of DIN 6915 High-Strength Hex Nuts for Structural Bolting are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 6915 High-Strength Hex Nuts for Structural Bolting orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 6915 High-Strength Hex Nuts for Structural Bolting), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for DIN 6915 High-Strength Hex Nuts for Structural Bolting: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for din 6915 high-strength hex nuts for structural bolting is 10,000 pieces (applies to the standard sizes and finishes for din 6915 high-strength hex nuts for structural bolting; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 6915 high-strength hex nuts for structural bolting run 3–7 days. Quantities or variants of din 6915 high-strength hex nuts for structural bolting outside the standard range are confirmed at quotation.

Storage & shipping

DIN 6915 High-Strength Hex Nuts for Structural Bolting are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 6915 high-strength hex nuts for structural bolting dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

How does DIN 6915 differ from a standard hex nut in a structural connection?

Three ways, all of them part of the HV preloading system. First, height: the taller m profile gives the nut thread engagement the preload demands. Second, width across flats: DIN 6915 runs one wrench size larger than the DIN 934 series for the same thread, so the socket plan for a steel package must follow the table, not habit. Third, system matching: HV connections are preloaded by controlled methods (turn-of-nut, combined method), and the nut is matched to the bolt and washer as a set — substituting a standard nut breaks the pairing and the guarantee that comes with it. Geometry from the table, class pairing confirmed at quotation.

What is the MOQ and lead time for this nut type?

The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common diameters in this nut type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

What is the MOQ and lead time for DIN 6915 High-Strength Hex Nuts for Structural Bolting?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for DIN 6915 High-Strength Hex Nuts for Structural Bolting state?

State the full designation (DIN 6915), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 6915 High-Strength Hex Nuts for Structural Bolting inquiry

  • ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
  • ✓ State the nut property class or material and the bolt class/material it must be paired with.
  • ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
  • ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
  • ✓ Factory-direct pricing for your DIN 6915 High-Strength Hex Nuts for Structural Bolting
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.