DIN 1479 Hex Turnbuckle Nuts

DIN 1479 hex turnbuckle nuts, M6 to M30 — the long unslotted hex nut that takes-up and locks turnbuckle and tension-rod threads — with the collected per-size tables: pitch, d 1/d 2, nut length L, across flats s and the m/t dims.

Last updated: 2026-11

Request a Quote

DIN 1479 Hex Turnbuckle Nuts in an industrial setting
Illustrative image redrawn from real DIN 1479 Hex Turnbuckle Nuts product references — not a photograph of stocked items.

Specifications

DIN 1479 is the elongated hex nut of take-up and tension assemblies: run on a threaded rod (a turnbuckle barrel, a tie-rod end, an adjusting screw), it acts as a locknut that jams against a standard nut or a component face to hold the setting. The extra length L — 30 mm at M6 up to 125 mm at M30 in the collected table — gives the rod generous thread engagement, which is what a tension joint needs: more engaged turns to spread the load and a longer bolt of thread to absorb setting adjustments without running out of thread. The collected tables cover M6 to M30 in two column groups with pitch P, d 1 and d 2, length L (nominal with max/min), across flats s and the m/t approximate dims. The source reproduces the small d 1 max/min pair (4.3/3.7) across every size including M16-M30 and prints d 2 as "/" at M6 — both quirks are kept verbatim in the tables and disclosed, so confirm the intended geometry at RFQ. Thread-fit class, materials and finishes are not printed by the collected specification and stay per RFQ.

Standard DIN 1479 — hex turnbuckle nuts (elongated lock/take-up nuts for threaded rod and tension assemblies)
Series M6 – M30 (two source column groups)
Tabulated geometry Per size: pitch P, d 1 (max/min, source repeats 4.3/3.7 across all sizes), d 2 ("/" at M6; 21–32 at M20–M30), length L (nominal/max/min, 30–125 mm), across flats s (max/min), m and t (≈)
Function Jams against a mating nut or face to lock turnbuckle and tie-rod settings; long body adds thread engagement
Thread fit / materials Not tabulated by the collected specification — per RFQ
DIN 1479 hex turnbuckle nuts - per-size dimensions (M6 - M12)All dimensions in millimeters. Attribute labels follow the source: P = thread pitch; d 2 = printed as "/" by the source for these sizes; d 1 = printed max/min (the source repeats 4.3/3.7 across all sizes); L = nut length; s = width across flats; m and t = approximate (≈) dims as printed. Lengths, materials and finishes are not tabulated by the collected specification.
AttributeM6M8M10M12
P — Pitch11.251.51.75
d 2////
d 1 — max4.34.34.34.3
d 1 — min3.73.73.73.7
L — Nominal Size30354555
L — max30.535.845.855.8
L — min29.534.244.254.2
s — max10131618
s — min9.7812.7315.7317.73
m — ≈22.5253340
t — ≈9.5121417
DIN 1479 hex turnbuckle nuts - per-size dimensions (M16 - M30)All dimensions in millimeters, transcribed verbatim. Source quirks reproduced as printed: d 2 is "/" at M6 only (values 21/26/32 at M20/M24/M30); the d 1 max/min pair repeats the small 4.3/3.7 values across every size including M16-M30; the m ≈ row prints 55 at M16 against 24-36 at M20-M30. Confirm the intended geometry against the application before ordering — the source table is reproduced without interpretation.
AttributeM16M20M24M30
P — Pitch22.533.5
d 2/212632
d 1 — max4.34.34.34.3
d 1 — min3.73.73.73.7
L — Nominal Size7595115125
L — max75.895.8115.8126.2
L — min74.294.2114.2123.8
s — max24303646
s — min23.6729.163545
m — ≈55242936
t — ≈22263138

Materials

  • Material and property class specified per RFQ — confirm against rod strength and duty at quotation

Ordering & documentation

Documents

Shipments of DIN 1479 Hex Turnbuckle Nuts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 1479 Hex Turnbuckle Nuts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 1479 Hex Turnbuckle Nuts), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for DIN 1479 Hex Turnbuckle Nuts: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for din 1479 hex turnbuckle nuts is 10,000 pieces (applies to the standard sizes and finishes for din 1479 hex turnbuckle nuts; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 1479 hex turnbuckle nuts run 3–7 days. Quantities or variants of din 1479 hex turnbuckle nuts outside the standard range are confirmed at quotation.

Storage & shipping

DIN 1479 Hex Turnbuckle Nuts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 1479 hex turnbuckle nuts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

How does a DIN 1479 turnbuckle nut lock a setting?

By jamming, not by friction insert. Run the DIN 1479 nut up against the component or the primary nut and torque the two against each other: the counter-facing thread flanks wedge, and the pair will not back off under vibration the way a single nut can. The long DIN 1479 body matters in two ways — it puts enough engaged turns on the rod that the jamming load spreads over several threads instead of stripping the first one, and it gives the adjustment stroke room so the jam can be set without the nut running off the end of the thread. Read the collected table's L column against your rod thread length before ordering, and note the disclosed source quirks on d 1/d 2 (the small d 1 pair repeated across all sizes and the "/" at M6) — state the intended rod and mating nut at RFQ so the fit is confirmed.

What is the MOQ and lead time for this nut type?

The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common sizes in this nut type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

What is the MOQ and lead time for DIN 1479 Hex Turnbuckle Nuts?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for DIN 1479 Hex Turnbuckle Nuts state?

State the full designation (DIN 1479), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 1479 Hex Turnbuckle Nuts inquiry

  • ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
  • ✓ State the nut property class or material and the bolt class/material it must be paired with.
  • ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
  • ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
  • ✓ Factory-direct pricing for your DIN 1479 Hex Turnbuckle Nuts
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.