2H15 Angled Two-Hole Security Nuts
Angled spanner-drive security nuts whose two-hole pattern sits at an angle to the face, M6–M10 and 1/4"-20 to 3/8"-16 as tabulated — a uniform 25.4 mm (1") head, 6.35 mm (1/4") high, one tool size across the range. Steel zinc plated; reusable, low-to-medium torque.
Last updated: 2026-11
Specifications
The angled two-hole security nut takes the standard spanner-drive principle and tilts the hole pair, so the driver engages off-axis — an extra layer of obscurity on top of the missing grip points, and the reason the source describes the nut as harder to remove than its flat-faced sibling. The collected tabulation is uniform across the range: every size, metric M6, M8 and M10 and imperial 1/4"-20, 5/16"-18 and 3/8"-16, shares a 25.4 mm (1") head diameter and a 6.35 mm (1/4") head height, and one tool size suits all of them. Steel zinc plated is the collected finish. The fixing is reusable and intended for low-to-medium torque applications — the shallow two-hole drive cannot carry the torque of a hex, and it cams out more readily than pin-torx or pin-hex drives — so the right joints are those where appearance and tamper-resistance matter more than clamped load: panels, trim, signage and public furniture that still needs legitimate servicing.
| Designation | 2H15 — angled two-hole security nut; hole pair set at an angle to the nut face, driven off-axis by a matching two-hole tool |
|---|---|
| Metric thread range (tabulated) | M6, M8, M10 |
| Imperial threads (tabulated) | 1/4"-20, 5/16"-18, 3/8"-16 |
| Head diameter DK (all tabulated sizes) | 25.4 mm (1") |
| Head height K (all tabulated sizes) | 6.35 mm (1/4") |
| Tool size | One tool size suits all tabulated sizes |
| Security principle | Angled two-hole spanner drive — no grip points for standard tools; angled pattern makes removal harder; reusable |
| Torque class (source-stated) | Suitable for low to medium torque applications; drive more prone to cam-out than pin torx or pin hex |
| Material / finish (collected) | Steel, zinc plated |
Materials
- Steel, zinc plated
The zinc-plated steel option is the standard stock for this angled pattern, and the logic is the furniture-barrel one: high-quality steel for strength with zinc plating as the standard corrosion protection — the coat is the corrosion budget, so the honest service envelope is indoor or dry conditions where a breached coat never becomes a hidden-thread problem.
The angled geometry is an installation-access feature, not a material property: it changes how the drive reaches the two-hole pattern, not how the metal behaves, so the material decision stays a straight zinc-steel-versus-stainless trade on environment and budget. No security class is implied by either choice — spanner fixings discourage casual tampering but are not removal-proof.
Ordering & documentation
Documents
Shipments of 2H15 Angled Two-Hole Security Nuts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for 2H15 Angled Two-Hole Security Nuts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (2H15 Angled Two-Hole Security Nuts), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for 2H15 Angled Two-Hole Security Nuts: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for 2h15 angled two-hole security nuts is 10,000 pieces (applies to the standard sizes and finishes for 2h15 angled two-hole security nuts; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for 2h15 angled two-hole security nuts run 3–7 days. Quantities or variants of 2h15 angled two-hole security nuts outside the standard range are confirmed at quotation.
Storage & shipping
2H15 Angled Two-Hole Security Nuts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store 2h15 angled two-hole security nuts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
What does the angled hole pattern actually add?
Obscurity plus alignment. Because the two holes sit at an angle to the face, a flat two-hole driver will not engage — the matching angled tool is needed, and the source notes this makes the nut harder to remove than a straight two-hole pattern. It stays a reusable, two-way fixing, so it belongs where tamper-resistance and a clean flush face matter but the joint still gets legitimate maintenance.
Can I torque this nut like a standard hex nut?
No. The collected page classifies it for low-to-medium torque applications and warns the two-hole drive cams out more easily than pin-torx or pin-hex security drives. Size the joint accordingly — panels, trim and fittings rather than heavily loaded structural members — and note the source also advises buying the mating screws and driver bits from the same supplier so the drive geometry matches.
What is the MOQ and lead time for this nut type?
The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common diameters in this nut type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.
What should an RFQ for this nut type state?
State the designation (for example the spanner-drive SKU and head style), nominal thread size and pitch, material and finish, whether the matching drive tool or bit is needed, the mating screw or stud specification, required certificates, and quantity per size — plus destination country.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your 2H15 Angled Two-Hole Security Nuts inquiry
- ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
- ✓ State the nut property class or material and the bolt class/material it must be paired with.
- ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
- ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
- ✓ Factory-direct pricing for your 2H15 Angled Two-Hole Security Nuts
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support