SB004 Low Profile Socket Barrel Nuts
Closed-end low-profile barrel nuts (sleeve nuts) with hex socket drive, M5–M8 in A4 stainless steel. Tabulated bodies 7–10 mm over 10–16 mm heads, lengths 32/37 mm, installed with a 4–6 mm A/F hex key — the discreet architectural fixing.
Last updated: 2026-11
Specifications
The low profile socket barrel nut is built for joints where the fixing must disappear: a short closed-end sleeve with a shallow socket head that hides almost entirely inside the material or a counterbore. The collected tabulation covers M5, M6 and M8 — bodies of 7, 8 and 10 mm diameter under heads of 10, 12 and 16 mm, overall lengths 32 mm (M5/M6) and 37 mm (M8), with 20–25 mm of that below the head and 30–35 mm total usable length. Drive is a standard hex socket at 4, 5 and 6 mm A/F, and the closed end means the mating machine screw bottoms inside the barrel rather than exiting the face. A4 stainless is the standard material — the seawater-grade choice for exterior architectural work — and any machine screw of the same thread works as the male half. Panel joints, handrail and glazing detail, signage and street furniture are where this pattern earns its keep.
| Designation | SB004 — low profile socket barrel nut (closed end; sleeve nut) |
|---|---|
| Thread range | M5, M6, M8 |
| Body diameter D per thread (mm) | M5 7 · M6 8 · M8 10 |
| Head diameter D1 per thread (mm) | M5 10 · M6 12 · M8 16 |
| Overall length L per thread (mm) | M5 32 · M6 32 · M8 37 |
| Length under head L1 per thread (mm) | M5 30 · M6 30 · M8 35 |
| Thread engagement L2 per thread (mm) | M5 20 · M6 20 · M8 25 |
| Tool size per thread | M5 4 mm A/F · M6 5 mm A/F · M8 6 mm A/F (hex socket) |
| Available lengths (tabulated) | 30 mm, 35 mm |
| Material | A4 stainless steel as standard |
| Typical applications | Architectural applications; suits any machine screw of the same thread |
Materials
- A4 stainless steel
A4-only stock on this low-profile form is a chloride decision, not a styling one: 316-class steel adds 2-3 percent molybdenum, and that addition greatly improves resistance to chloride corrosion, making it the best choice for highly corrosive environments such as marine or chemical processing service.
The hidden-thread geometry is the reason to pay for it here: a barrel nut's thread sits fully inside the barrel, so chloride attack cannot be seen or re-cut in place — A4 removes the failure mode rather than delaying it. The mechanical job is unchanged by the grade: twin-hole barrel patterns are chosen for right-angled joints resisting high pull-out forces, and A4 carries that load as well as any steel barrel.
Ordering & documentation
Documents
Shipments of SB004 Low Profile Socket Barrel Nuts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for SB004 Low Profile Socket Barrel Nuts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (SB004 Low Profile Socket Barrel Nuts), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for SB004 Low Profile Socket Barrel Nuts: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for sb004 low profile socket barrel nuts is 10,000 pieces (applies to the standard sizes and finishes for sb004 low profile socket barrel nuts; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for sb004 low profile socket barrel nuts run 3–7 days. Quantities or variants of sb004 low profile socket barrel nuts outside the standard range are confirmed at quotation.
Storage & shipping
SB004 Low Profile Socket Barrel Nuts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store sb004 low profile socket barrel nuts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
What makes the low profile socket barrel nut different from a standard barrel nut?
Proportion. The head is shallow and the body short, so the nut hides inside a counterbore or the panel thickness instead of standing proud of the surface — with the socket drive it needs nothing more than a hex key through a small access point. The closed end keeps the screw inside the barrel, which is why it suits architectural joints where both faces matter aesthetically.
What is the MOQ and lead time for this nut type?
The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common diameters in this nut type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.
What should an RFQ for this nut type state?
State the designation (for example the barrel-nut SKU and head style), nominal thread size and pitch, overall barrel length or grip, material and finish (plain, zinc, or stainless where compatible), whether a through-hole or blind (closed) end barrel is required, the mating screw specification, required certificates, and quantity per size — plus destination country.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your SB004 Low Profile Socket Barrel Nuts inquiry
- ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
- ✓ State the nut property class or material and the bolt class/material it must be paired with.
- ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
- ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
- ✓ Factory-direct pricing for your SB004 Low Profile Socket Barrel Nuts
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support