DIN 928 Square Weld Nuts
DIN 928 square weld nuts, M4 to M16 — the square-bodied counterpart to DIN 929 with pilot ring and weld projections that fuse into thin sheet — with the full collected 10-column table: pitch, weld-projection geometry, pilot and bore diameters, nut height, width across flats, reference mass and the source's proof-load rows.
Last updated: 2026-11
Specifications
DIN 928 is the square weld nut: the same projection-welding principle as DIN 929, with the nut body rolled square instead of hex. The square form gives two practical differences. First, the wider flats resist rotation in the sheet during the weld itself, so alignment fixtures are simpler on fast-moving lines. Second, where the finished face is visible or the mating part is a stamped bracket with a square slot, the square body keys into the cutout and cannot spin under a torque wrench afterwards. The collected table covers M4 to M16 with thread pitch (coarse plus the source's fine-thread columns), weld-projection height b, weld boss d 1, pilot d 2, bore d 3, width across corners e, projection heights h 1 / h 2, nut height m, width across flats s, the source's reference mass per 1000 units, and its Ensure-the-load proof-load rows in newtons. The source also prints two 7/16 ① inch columns inside the metric series — reproduced verbatim with the source's marker. Materials and finishes are not printed by the collected specification and stay per RFQ. For the hex-bodied form on the same welding principle see DIN 929 on this site.
| Standard | DIN 928 — square weld nuts (resistance-welded, projections on bearing face) |
|---|---|
| Series | M4 – M16 (source also prints two 7/16 ① inch columns inside the metric series, reproduced verbatim) |
| Tabulated geometry | Per size: pitch P (coarse + fine columns), projection height b, weld boss d 1, pilot d 2, bore d 3, across corners e, projection heights h 1 / h 2, height m, across flats s, reference mass per 1000 units ≈ kg |
| Proof load | Source "Ensure the load(N)" rows in newtons per size — coarse and fine thread columns |
| Function | Fuses into sheet by projection welding; square body resists in-sheet rotation and keys into square cutouts |
| Materials / strength | Not tabulated by the collected specification beyond the source proof-load rows — per RFQ (weldability grade per application) |
| Size | P — Coarse Thread | P — Fine Thread -1 | P — Fine Thread -2 | b — Nominal size | b — max | b — min | d 1 — min=nominal size (H13) | d 1 — max | d 2 — max | d 3 — min | e — min | h 1 — Nominal Size | h 1 — max | h 1 — min | h 2 — min | h 2 — max | m — max=nominal size (h13) | m — min | s — max=nominal size (h13) | s — min | per 1000 units ≈ kg | Ensure the load(N) — Coarse Thread | Ensure the load(N) — Fine Thread -1 | Ensure the load(N) — Fine Thread -2 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M4 | 0.7 | / | / | 0.8 | 0.95 | 0.65 | 5 | 5.18 | 4.2 | 6.4 | 9 | 0.6 | 0.7 | 0.5 | 0.4 | 1.3 | 3.5 | 3.2 | 7 | 6.64 | 0.81 | 6800 | - | - |
| M5 | 0.8 | / | / | 1 | 1.15 | 0.85 | 6 | 6.18 | 5.25 | 8.2 | 12 | 0.8 | 0.9 | 0.7 | 0.6 | 1.5 | 4.2 | 3.9 | 9 | 8.64 | 1.7 | 11000 | - | - |
| M6 | 1 | / | / | 1.2 | 1.35 | 1.05 | 7.5 | 7.72 | 6.3 | 9.1 | 13 | 0.8 | 0.9 | 0.7 | 0.7 | 1.8 | 5 | 4.7 | 10 | 9.64 | 2.4 | 15500 | - | - |
| M8 | 1.25 | 1 | / | 1.5 | 1.65 | 1.35 | 10 | 10.22 | 8.4 | 12.8 | 18 | 1 | 1.1 | 0.9 | 1.1 | 2 | 6.5 | 6.14 | 14 | 13.57 | 6.5 | 28300 | 30200 | - |
| M10 | 1.5 | 1 | 1.25 | 1.8 | 2 | 1.6 | 12.5 | 12.77 | 10.5 | 15.6 | 22 | 1.2 | 1.3 | 1.1 | 1.25 | 2.2 | 8 | 7.64 | 17 | 16.57 | 11.3 | 44800 | 50200 | 47800 |
| 7/16 ① | / | / | 20 | 1.8 | 2 | 1.6 | 12.5 | 12.77 | 11.7 | 15.6 | 22 | 1.2 | 1.3 | 1.1 | 1.25 | 2.2 | 9 | 8.64 | 17 | 16.57 | 12.5 | - | - | 53600 |
| 7/16 ① | / | / | 20 | 2 | 2.2 | 1.8 | 13.5 | 13.77 | 11.7 | 17.4 | 25 | 1.4 | 1.5 | 1.3 | 1.75 | 3 | 9 | 8.64 | 19 | 18.48 | 16.5 | - | - | 53600 |
| M12 | 1.75 | 1.25 | 1.5 | 2 | 2.2 | 1.8 | 13.5 | 13.77 | 12.6 | 17.4 | 25 | 1.4 | 1.5 | 1.3 | 1.75 | 3 | 9.5 | 9.14 | 19 | 18.48 | 16.5 | 65300 | 72100 | 68200 |
| M14 | 2 | 1.5 | - | 2.5 | 2.7 | 2.3 | 16.8 | 17.07 | 14.7 | 20.4 | 28 | 1.4 | 1.5 | 1.3 | 1.75 | 3.2 | 11 | 10.57 | 22 | 21.48 | 26.7 | 89700 | 97500 | - |
| M16 | 2 | 1.5 | - | 2.5 | 2.7 | 2.3 | 18.8 | 19.13 | 16.8 | 22.4 | 32 | 1.6 | 1.7 | 1.5 | 2 | 4 | 13 | 12.57 | 24 | 23.48 | 35.8 | 123000 | 132000 | - |
Materials
- Material and finish specified per RFQ — weldability depends on the sheet stack-up; confirm at quotation
Ordering & documentation
Documents
Shipments of DIN 928 Square Weld Nuts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 928 Square Weld Nuts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 928 Square Weld Nuts), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for DIN 928 Square Weld Nuts: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for din 928 square weld nuts is 10,000 pieces (applies to the standard sizes and finishes for din 928 square weld nuts; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 928 square weld nuts run 3–7 days. Quantities or variants of din 928 square weld nuts outside the standard range are confirmed at quotation.
Storage & shipping
DIN 928 Square Weld Nuts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 928 square weld nuts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
DIN 928 or DIN 929 — when does the square body matter?
Both weld by the same projections and carry comparable threads in the overlapping M4–M16 range, so the choice is usually downstream of the weld. The square body cannot rotate in an oversized or slotted cutout, which matters when a fastener will be torqued against the nut after welding or when the sheet layout already uses square punchings. The hex form suits standard hex-driven tooling and tighter across-flats envelopes. Check the two tables side by side: at the same thread, the pilot and projection geometry differ, so electrode holders are not always shared. On visible or galvanized panel work, confirm the weld spatter allowance on the actual stack either way.
What is the MOQ and lead time for this nut type?
The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common diameters in this nut type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.
What is the MOQ and lead time for DIN 928 Square Weld Nuts?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for DIN 928 Square Weld Nuts state?
State the full designation (DIN 928), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 928 Square Weld Nuts inquiry
- ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
- ✓ State the nut property class or material and the bolt class/material it must be paired with.
- ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
- ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
- ✓ Factory-direct pricing for your DIN 928 Square Weld Nuts
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support