2H07 Pan Head Two-Hole Security Barrel Nuts & Sex Bolts
Two-hole spanner-drive security barrel nuts with a low-profile pan head — female internally threaded sex-bolt halves whose male/female pairs carry matched head dimensions for a flush appearance. Steel, A2 or A4 stainless; no dimension table in the collected source — construction fields only.
Last updated: 2026-11
Specifications
The pan head two-hole security barrel nut brings the pig-nose spanner drive to the sex-bolt system: a female, internally threaded barrel whose head carries the two-hole pattern, paired with a male security machine screw whose head is dimensionally matched so the assembled pair reads as one clean unit. The collected page positions the pan head explicitly on profile — chosen over button-head styles where the fixing must stay low — with truss and countersunk heads available in the same series. Supply runs in steel, A2 stainless and A4 stainless, and the drive family extends beyond two-hole to pin-torx, pin-hex, clutch-head and wave on the same body concept, so a project can standardise the barrel joint while varying the security level. One scope note governs this page: the collected source publishes no dimension table for this SKU — head diameters, barrel sizes and lengths are confirmed to customer drawings — so only construction and material fields are stated here, and every dimension goes through quotation against your drawing.
| Designation | 2H07 — pan head two-hole security barrel nut (sex bolt half); two-hole spanner drive on a low-profile pan head |
|---|---|
| System | Female internally threaded barrel + male security machine screw; head dimensions matched male-to-female for a finished appearance |
| Head style position (source-stated) | Pan head chosen for low profile compared to button head styles; truss and countersunk heads also available |
| Drive | Two-hole spanner drive requiring a special tool or bit; pin TX, pin hex, clutch head and wave drives available on the same concept |
| Materials (collected) | Steel, A2 stainless steel, A4 stainless steel |
| Dimensions | No dimension table in the collected source — sizes to customer drawings, confirmed at quotation |
Materials
- Steel
- A2 stainless steel
- A4 stainless steel
This barrel-form security nut is a three-way material decision driven by environment, not by tamper resistance — the two-hole drive supplies that. Steel is the load carrier in furniture and enclosure interiors: barrel nuts are commonly used in aerospace and ready-to-assemble furniture applications, and furniture-grade stock is manufactured in high-quality steel for strength with zinc plating as standard corrosion protection, so the zinc coat is the entire corrosion budget.
A2 stainless is the outdoor/general-corrosion upgrade; A4 is for where chlorides meet a barrel form: 316-class steel adds 2-3 percent molybdenum, and that addition greatly improves resistance to chloride corrosion for marine or chemical-processing service — worth paying for here because a barrel nut's thread is hidden inside the barrel, so chloride attack is invisible until the joint loosens.
The mechanical job is identical across all three rows — right-angled joints resisting high pull-out forces — so pick by service environment and budget, not by strength assumptions.
Ordering & documentation
Documents
Shipments of 2H07 Pan Head Two-Hole Security Barrel Nuts & Sex Bolts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for 2H07 Pan Head Two-Hole Security Barrel Nuts & Sex Bolts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (2H07 Pan Head Two-Hole Security Barrel Nuts & Sex Bolts), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for 2H07 Pan Head Two-Hole Security Barrel Nuts & Sex Bolts: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for 2h07 pan head two-hole security barrel nuts & sex bolts is 10,000 pieces (applies to the standard sizes and finishes for 2h07 pan head two-hole security barrel nuts & sex bolts; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for 2h07 pan head two-hole security barrel nuts & sex bolts run 3–7 days. Quantities or variants of 2h07 pan head two-hole security barrel nuts & sex bolts outside the standard range are confirmed at quotation.
Storage & shipping
2H07 Pan Head Two-Hole Security Barrel Nuts & Sex Bolts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store 2h07 pan head two-hole security barrel nuts & sex bolts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
Why are there no dimensions on this page?
Because the collected catalogue page publishes none for this SKU — it describes construction, materials and head-style options, and points non-standard sizes and custom parts to order against drawings. Rather than borrow numbers from a different SKU or invent a table, we state only what the source states and confirm exact head, barrel and length dimensions at quotation against your drawing.
When does the pan head earn its place over a countersunk or button head?
When the joint face is flat and the fixing must stay low without a countersink. The collected page positions the pan head as the low-profile choice compared to button head styles, and because the male and female head dimensions are matched, the pair presents one consistent profile across both sides of the joint. Countersunk and truss variants cover flush-finish and wider-bearing cases respectively.
What is the MOQ and lead time for this nut type?
The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common diameters in this nut type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.
What should an RFQ for this nut type state?
State the designation (for example the spanner-drive SKU and head style), nominal thread size and pitch, material and finish, whether the matching drive tool or bit is needed, the mating screw or stud specification, required certificates, and quantity per size — plus destination country.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your 2H07 Pan Head Two-Hole Security Barrel Nuts & Sex Bolts inquiry
- ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
- ✓ State the nut property class or material and the bolt class/material it must be paired with.
- ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
- ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
- ✓ Factory-direct pricing for your 2H07 Pan Head Two-Hole Security Barrel Nuts & Sex Bolts
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support