DIN 6925 Self-Locking Nuts, All-Metal (Reduced Width Across Flats)

DIN 6925 all-metal self-locking nuts with reduced width across flats, M3 to M36: coarse and fine pitch, reduced s, e min and the prevailing-torque height band h min/max.

Last updated: 2026-11

Request a Quote

DIN 6925 Self-Locking Nuts, All-Metal (Reduced Width Across Flats) in an industrial setting
Illustrative image redrawn from real DIN 6925 Self-Locking Nuts, All-Metal (Reduced Width Across Flats) product references — not a photograph of stocked items.

Specifications

DIN 6925 is the withdrawn all-metal self-locking nut that the source titles "width across flat reduced" — the insert-free prevailing-torque nut whose locking collar (the distorted thread section) keeps preload under vibration without nylon, so it survives heat and chemicals the polymer versions cannot. The collected 07/1987-edition table runs M3 to M36 with both pitch columns printed side by side (P coarse and P fine per size, fine-pitch cells as printed, e.g. 1/1.25 and 1.25/1.5 at M10/M12), the s nom=max column (17 at M10, 30 at M20, 55 at M36), e min and the locking height band h min/max (34/36 at M36 — the extra height that houses the distorted collar). Withdrawn is the source's own label: the geometry remains what legacy heat-exposed and chemical-exposed assemblies order against, while new drawings typically move to the current all-metal flange standard ISO 7044 (registered separately) where the flange version suits.

Standard / scope DIN 6925 self-locking nuts, all-metal, width across flats reduced — M3 to M36, withdrawn (source label; edition 07/1987)
Pitch columns P coarse and P fine printed per size (e.g. M36: 4 coarse / 3 fine) — order states which pitch
Width across flats s Source-titled "reduced": s nom=max 5.5 (M3) to 55 (M36) with e min per size (6.01 at M3, 60.79 at M36) — check s against your wrench stock, locknut WAF ladders differ between series
Locking height h min/max band per size (34/36 at M36) — the all-metal collar geometry
Not tabulated Property class, prevailing torque values, finish, temperature rating — per RFQ
DIN 6925 self-locking nuts, all-metal (withdrawn) — reduced width across flats, 07/1987 edition, geometry by thread d1Dimensions in mm unless stated; cell values, symbols and decimal marks exactly as printed on the source page. Column 1 is the row label.
d1 thread sizeP Coarse PitchP Fine Pitchs nom=maxe minh minh max
M 30.5-5.56.013.43.7
M 40.7-77.663.94.2
M 50.8-88.794.85.1
M 61-1011.055.76
M 71-1112.126.57
M 81.2511314.387.58
M 101.51/1.251718.9910
M 121.751.25/1.51921.11112
M 1421.52224.491214
M 1621.52426.751416
M 182.51.5/22729.561618
M 202.51.5/23032.951820
M 24323639.552224
M 303.524650.852830
M 36435560.793436
  • Source spanning title row carried verbatim: "Dimensions in mm - source DIN 6925 Withdrawn width across flat reduced - chiave ridotta - Schlüsselweite reduzierten Publication date: 07 - 1987".
  • Row-width mismatch in the source grid: source rows carry differing non-empty cell counts (6/7) — grid padded empty; per-row pre-pad widths: 6,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7.

Materials

  • All-metal locknuts order in steel property classes 8/10/12 with the collar distortion done after finish where plating would fill the locking threads — flag any coating requirement, because some platings change prevailing torque. Stainless A2/A4 versions for corrosive/heat service; the all-metal collar is exactly the choice where nylon inserts melt (>120 °C-class service) or soften in solvents

Ordering & documentation

Documents

Shipments of DIN 6925 Self-Locking Nuts, All-Metal (Reduced Width Across Flats) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 6925 Self-Locking Nuts, All-Metal (Reduced Width Across Flats) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 6925 Self-Locking Nuts, All-Metal (Reduced Width Across Flats)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for DIN 6925 Self-Locking Nuts, All-Metal (Reduced Width Across Flats): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for din 6925 self-locking nuts, all-metal (reduced width across flats) is 10,000 pieces (applies to the standard sizes and finishes for din 6925 self-locking nuts, all-metal (reduced width across flats); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 6925 self-locking nuts, all-metal (reduced width across flats) run 3–7 days. Quantities or variants of din 6925 self-locking nuts, all-metal (reduced width across flats) outside the standard range are confirmed at quotation.

Storage & shipping

DIN 6925 Self-Locking Nuts, All-Metal (Reduced Width Across Flats) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 6925 self-locking nuts, all-metal (reduced width across flats) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

What does the "reduced width across flats" in the title mean for my assembly?

It is the source standard's own designation, and its practical effect is on the wrench, not the joint: read the s column per size (17 at M10, 19 at M12, 24 at M16, 55 at M36) and check it against your socket stock, because locknut and flange-series WAF ladders do not follow one rule across sizes — some match the hex series, some sit a step off, which is exactly why the title flags the reduction. Everything the joint cares about — prevailing torque, pitch (including the double fine-pitch cells like 1/1.25 at M10), height band h, thread — is the all-metal locknut system. Two cautions when substituting a standard all-metal nut: the wrench size can change, and the h height differs — anything with a thread-protrusion or stack-up check needs re-verifying against the columns here.

The standard is withdrawn — is the all-metal locknut itself obsolete?

No — the concept is current practice; the DIN document was superseded in the standards system, not the part. New drawings should call the current ISO all-metal nut (ISO 7044 for the flange version, registered separately, or the ISO prevailing-torque hex series), and we map DIN 6925 call-outs to the current equivalent size by size because the reduced-WAF detail means a blind substitution can change the wrench and the h stack. For replacement work the parts are supplied exactly against the DIN 6925 number. If your application is the classic all-metal territory — exhaust-adjacent, oven, chemical bath — say the temperature and medium on the RFQ and we confirm the material class of the collar, which the standard tables do not carry.

What is the MOQ and lead time for DIN 6925 Self-Locking Nuts, All-Metal (Reduced Width Across Flats)?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for DIN 6925 Self-Locking Nuts, All-Metal (Reduced Width Across Flats) state?

State the full designation (DIN 6925 Self-Locking Nuts, All-Metal (Reduced Width Across Flats)), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 6925 Self-Locking Nuts, All-Metal (Reduced Width Across Flats) inquiry

  • ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
  • ✓ State the nut property class or material and the bolt class/material it must be paired with.
  • ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
  • ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
  • ✓ Factory-direct pricing for your DIN 6925 Self-Locking Nuts, All-Metal (Reduced Width Across Flats)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.