DIN 546 Slotted Round Nuts
DIN 546 slotted round nuts, M1 to M20: pitch, outer diameter, slot depth t min÷max, height m, slot width n and mass — the thin slotted nut for small shafts and instruments.
Last updated: 2026-11
Specifications
DIN 546 is the slotted round nut in the small sizes — M1 up to M20 — the low-profile screwed adjuster locked by a cotter or screw through its slots: bearing adjustment rings on small shafts, instrument and optical mounts, springs and preload collars. The collected 09/2010-edition table (superseding 09/1986) gives pitch, outer diameter dk max=nom (3 at M1.2 up to 32 at M20), the slot depth range printed as two columns under the same t min÷max label (the source's own doubled header, carried verbatim — read as the min and max of the slot depth pair), height m max=nom (1 at M1 to 14 at M20), slot width n nom and the mass per 1000 pcs. The tiny sizes (M1–M3.5) are what separate this standard from the bigger slotted-nut series: watchmaker-to-instrument scale work where the nut is essentially a threaded washer with slots.
| Standard / scope | DIN 546 slotted round nuts — M1 to M20, edition 09/2010 (supersedes 09/1986) |
|---|---|
| Outer diameter dk | max=nom: 3 (M1.2), 6 (M3), 11 (M8), 18 (M10), 32 (M20) |
| Slot depth t | Printed as two columns under a doubled t min÷max label (source quirk, verbatim) — the slot-depth min/max pair per size: 0.3/0.5 at M1-class to 4.8/5.5 at M20 |
| Height m / slot width n | m max=nom 1 (M1) to 14 (M20); n nom 0.3 (M1) to 5 (M20) |
| Mass | Approximate kg per 1000 pcs (ρ=7,85 kg/dm³) per size: 0.034 at M1 to 57.2 at M20 |
| Not tabulated | Material, slot-locking element (cotter/screw), finish — per RFQ |
| d thread size | Pitch | dk max=nom | t min÷max | t min÷max | m max=nom | n nom | Approximate weight, in kg x1000 pcs, (ρ=7,85 kg/dm3) |
|---|---|---|---|---|---|---|---|
| M 1 | 0.25 | 2.5 | 0.3 | 0.5 | 1 | 0.3 | 0.034 |
| M 1.2 | 0.25 | 3 | 0.4 | 0.6 | 1.2 | 0.4 | 0.057 |
| M 1.4 | 0.3 | 3 | 0.5 | 0.7 | 1.4 | 0.4 | 0.063 |
| M 1.6 | 0.35 | 3.5 | 0.6 | 0.8 | 1.6 | 0.5 | 0.1 |
| M 2 | 0.4 | 4.5 | 0.8 | 1 | 2 | 1 | 0.21 |
| M 2.5 | 0.45 | 5.5 | 0.9 | 1.1 | 2.2 | 1.2 | 0.34 |
| M 3 | 0.5 | 6 | 1 | 1.2 | 2.5 | 1.2 | 0.43 |
| M 3.5 | 0.6 | 7 | 1 | 1.4 | 3 | 1.4 | 0.7 |
| M 4 | 0.7 | 8 | 1.2 | 1.4 | 3.5 | 1.4 | 1.07 |
| M 5 | 0.8 | 9 | 1.5 | 1.6 | 4.2 | 2 | 1.8 |
| M 6 | 1 | 11 | 2 | 1.9 | 5 | 2.5 | 2.73 |
| M 8 | 1.25 | 14 | 2.5 | 2.4 | 6.5 | 3 | 5.57 |
| M 10 | 1.5 | 18 | 3.2 | 3 | 8 | 3.5 | 11.5 |
| M 12 | 1.75 | 21 | 3.8 | 3.7 | 10 | 4 | 21.5 |
| M 14 | 2 | 24 | 3.8 | 4.3 | 11 | 4 | 21.1 |
| M 16 | 2 | 26 | 3.8 | 4.3 | 12 | 4 | 36.8 |
| M 18 | 2.5 | 29 | 4.8 | 5.5 | 13 | 4 | 48.4 |
| M 20 | 2.5 | 32 | 4.8 | 5.5 | 14 | 5 | 57.2 |
- Source spanning title row carried verbatim: "Dimensions in mm- source DIN 546".
- Edition row carried from the source grid: "Publication date 09/2010 - Supersedes DIN 546: 09/1986".
Materials
- The small sizes order in free-cutting steel, brass (the classic instrument material, non-magnetic and corrosion-tolerant) and stainless A2; the locking element is ordered separately — the slot pair takes a flat cotter or a small set screw riding across it. Say which locking method the assembly uses, since slot width n and depth t must match the element, not just the standard
Ordering & documentation
Documents
Shipments of DIN 546 Slotted Round Nuts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 546 Slotted Round Nuts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 546 Slotted Round Nuts), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for DIN 546 Slotted Round Nuts: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for din 546 slotted round nuts is 10,000 pieces (applies to the standard sizes and finishes for din 546 slotted round nuts; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 546 slotted round nuts run 3–7 days. Quantities or variants of din 546 slotted round nuts outside the standard range are confirmed at quotation.
Storage & shipping
DIN 546 Slotted Round Nuts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 546 slotted round nuts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
The table prints the slot depth as two identical "t min÷max" columns — which is which?
That doubled header is exactly as the source page prints it — a colspan artifact the transcription flagged rather than normalized. Read it as the slot-depth pair: first column the t min value, second the t max (0.3 and 0.5 at the smallest sizes, 4.8 and 5.5 at M20). The pair matters when the locking element is driven across the slots: the cotter diameter must pass through the slot width n while bottoming inside the t band, or the lock rides loose. If your assembly uses a standard cotter size, send it with the RFQ and we check the t/n fit per size against the grid before quoting.
How far down the thread ladder do you actually supply?
The tabulated range starts at M1, and the practical supply split is: M4 upward is regular production, M1.6–M3.5 is instrument-scale work supplied on the same standards but in brass and free-cutting steels with the correspondingly small slot geometry, and M1/M1.2 are specialty items quoted per batch. For anything below M4, state the application (optical mount, sensor, watch-scale assembly) and quantity — the machining route, not the standard, sets the price at that scale. All sizes order against the same DIN 546 call-out with the dk/t/m values checked from the table.
What is the MOQ and lead time for DIN 546 Slotted Round Nuts?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for DIN 546 Slotted Round Nuts state?
State the full designation (DIN 546 Slotted Round Nuts), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 546 Slotted Round Nuts inquiry
- ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
- ✓ State the nut property class or material and the bolt class/material it must be paired with.
- ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
- ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
- ✓ Factory-direct pricing for your DIN 546 Slotted Round Nuts
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support