DIN 582 Lifting Eye Nuts
DIN 582 lifting eye nuts, M6 to M100×6 — the female-thread eyebolt that screws onto a stud to give a hoisting point — with the full collected 25-size table: ring outer and inner diameters, seat and boss diameters, height, thickness and the source's reference mass per unit.
Last updated: 2026-11
Specifications
A DIN 582 lifting eye nut is a load-rated ring with a female thread: it screws onto a threaded stud, lifting boss or anchor and turns any fixed thread into a hoisting point. The ring is a full torus — unlike the DIN 580 eyebolt, whose eye is forged from the shank — so the sling shackle bears on a continuous ring section, and the nut can be removed and re-used across fixtures, moulds and machine beds. The collected table covers M6 through M64 in coarse pitch plus the three fine-pitch large sizes (M72×6 / M80×6 / M100×6), with the eye-ring outer diameter d k, ring bore d 2, seat diameter d 1, nut thickness k, total height h, counterbore d 0, boss diameter d 3, and the source's reference mass per unit. What the collected specification does not print is the working load limit: that is a function of material, heat treatment and the loading direction, so the rating is confirmed per RFQ and the assembly's sling angle rules apply on site. For the male-thread counterpart see DIN 580 eye bolts on this site.
| Standard | DIN 582 — lifting eye nuts (female thread, ring type, for hoisting points) |
|---|---|
| Series | M6 – M64 coarse pitch, plus M72×6 / M80×6 / M100×6 fine pitch (25 sizes tabulated) |
| Tabulated geometry | Per size: ring outer d k, ring bore d 2, seat d 1, thickness k, total height h, counterbore d 0, boss d 3 (Nominal Size / min / max each), reference mass per unit ≈ kg |
| Function | Screws onto a threaded stud or boss to create a removable hoisting point for slings and shackles |
| Load rating | Working load limit not tabulated by the collected specification — confirmed per RFQ; loading direction and sling angle govern on site |
| Materials / strength | Not tabulated by the collected specification — per RFQ (load-rated material per application) |
| Size | d k — Nominal Size | d k — min | d k — max | d 2 — Nominal Size | d 2 — min | d 2 — max | d 1 — Nominal Size | d 1 — min | d 1 — max | k — Nominal Size | k — min | k — max | h — Nominal Size | h — min | h — max | d 0 — Nominal Size | d 0 — min | d 0 — max | d 3 — Nominal Size | d 3 — min | d 3 — max | per unit ≈ kg |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M6 | 20 | 19.5 | 20.9 | 36 | 35.5 | 37.1 | 20 | 19.1 | 20.5 | 8.5 | 8 | 9.4 | 36 | 35.5 | 37.1 | 8 | 7.5 | 8.9 | 10 | 9.5 | 10.9 | 0.05 |
| M8 | 20 | 19.5 | 20.9 | 36 | 35.5 | 37.1 | 20 | 19.1 | 20.5 | 8.5 | 8 | 9.4 | 36 | 35.5 | 37.1 | 8 | 7.5 | 8.9 | 10 | 9.5 | 10.9 | 0.05 |
| M10 | 25 | 24.5 | 25.9 | 45 | 44.5 | 46.1 | 25 | 24.1 | 25.5 | 10 | 9.5 | 10.9 | 45 | 44.5 | 46.1 | 10 | 9.5 | 10.9 | 12 | 11.5 | 12.9 | 0.09 |
| M12 | 30 | 29.5 | 30.9 | 54 | 53.5 | 55.1 | 30 | 29.1 | 30.5 | 11 | 10.5 | 11.9 | 53 | 52.5 | 54.1 | 12 | 11.5 | 12.9 | 14 | 13.5 | 14.9 | 0.16 |
| M14 | 35 | 34.5 | 36.1 | 63 | 62.5 | 64.1 | 35 | 33.9 | 35.5 | 13 | 12.5 | 13.9 | 62 | 61.5 | 63.1 | 14 | 13.5 | 14.9 | 16 | 15.5 | 16.9 | 0.24 |
| M16 | 35 | 34.5 | 36.1 | 63 | 62.5 | 64.1 | 35 | 33.9 | 35.5 | 13 | 12.5 | 13.9 | 62 | 61.5 | 63.1 | 14 | 13.5 | 14.9 | 16 | 15.5 | 16.9 | 0.24 |
| M18 | 40 | 39.5 | 41.1 | 72 | 71.5 | 73.1 | 40 | 38.9 | 40.5 | 16 | 15.5 | 16.9 | 71 | 70.5 | 72.1 | 16 | 15.5 | 16.9 | 19 | 18.5 | 19.9 | 0.37 |
| M20 | 40 | 39.5 | 41.1 | 72 | 71.5 | 73.1 | 40 | 38.9 | 40.5 | 16 | 15.5 | 16.9 | 71 | 70.5 | 72.1 | 16 | 15.5 | 16.9 | 19 | 18.5 | 19.9 | 0.36 |
| M22 | 50 | 49.4 | 51.2 | 90 | 89.4 | 91.2 | 50 | 48.8 | 50.6 | 20 | 19.5 | 21.1 | 90 | 89.4 | 91.2 | 20 | 19.5 | 21.1 | 24 | 23.5 | 25.1 | 0.73 |
| M24 | 50 | 49.4 | 51.2 | 90 | 89.4 | 91.2 | 50 | 48.8 | 50.6 | 20 | 19.5 | 21.1 | 90 | 89.4 | 91.2 | 20 | 19.5 | 21.1 | 24 | 23.5 | 25.1 | 0.72 |
| M27 | 65 | 64.3 | 66.3 | 108 | 107.3 | 109.5 | 60 | 58.7 | 60.7 | 25 | 24.4 | 26.2 | 109 | 108.3 | 110.5 | 24 | 23.4 | 25.2 | 28 | 27.4 | 29.2 | 1.34 |
| M30 | 65 | 64.3 | 66.3 | 108 | 107.3 | 109.5 | 60 | 58.7 | 60.7 | 25 | 24.4 | 26.2 | 109 | 108.3 | 110.5 | 24 | 23.4 | 25.2 | 28 | 27.4 | 29.2 | 1.32 |
| M33 | 75 | 74.3 | 76.5 | 126 | 125.2 | 127.7 | 70 | 68.5 | 70.7 | 30 | 29.3 | 31.3 | 128 | 127.2 | 129.7 | 28 | 27.3 | 29.3 | 32 | 31.3 | 33.3 | 2.11 |
| M36 | 75 | 74.3 | 76.5 | 126 | 125.2 | 127.7 | 70 | 68.5 | 70.7 | 30 | 29.3 | 31.3 | 128 | 127.2 | 129.7 | 28 | 27.3 | 29.3 | 32 | 31.3 | 33.3 | 2.08 |
| M39 | 85 | 84.3 | 86.5 | 144 | 143.2 | 145.7 | 80 | 78.5 | 80.7 | 35 | 34.3 | 36.5 | 147 | 146.2 | 148.7 | 32 | 31.3 | 33.3 | 38 | 37.3 | 39.5 | 3.15 |
| M42 | 85 | 84.3 | 86.5 | 144 | 143.2 | 145.7 | 80 | 78.5 | 80.7 | 35 | 34.3 | 36.5 | 147 | 146.2 | 148.7 | 32 | 31.3 | 33.3 | 38 | 37.3 | 39.5 | 3.11 |
| M45 | 100 | 99.2 | 101.7 | 166 | 164.9 | 168.1 | 90 | 88.3 | 90.8 | 40 | 39.2 | 41.7 | 168 | 166.9 | 170.1 | 38 | 37.2 | 39.7 | 46 | 45.2 | 47.7 | 5.08 |
| M48 | 100 | 99.2 | 101.7 | 166 | 164.9 | 168.1 | 90 | 88.3 | 90.8 | 40 | 39.2 | 41.7 | 168 | 166.9 | 170.1 | 38 | 37.2 | 39.7 | 46 | 45.2 | 47.7 | 5.02 |
| M52 | 110 | 108.9 | 112.1 | 184 | 182.8 | 186.4 | 100 | 98.1 | 100.9 | 45 | 44.1 | 46.9 | 187 | 185.8 | 189.4 | 42 | 41.1 | 43.9 | 50 | 49.1 | 51.9 | 6.79 |
| M56 | 110 | 108.9 | 112.1 | 184 | 182.8 | 186.4 | 100 | 98.1 | 100.9 | 45 | 44.1 | 46.9 | 187 | 185.8 | 189.4 | 42 | 41.1 | 43.9 | 50 | 49.1 | 51.9 | 6.69 |
| M60 | 120 | 118.9 | 122.1 | 206 | 204.8 | 208.4 | 110 | 107.9 | 111.1 | 50 | 49.1 | 51.9 | 208 | 206.8 | 210.4 | 48 | 47.1 | 49.9 | 58 | 57.1 | 59.9 | 9.43 |
| M64 | 120 | 118.9 | 122.1 | 206 | 204.8 | 208.4 | 110 | 107.9 | 111.1 | 50 | 49.1 | 51.9 | 208 | 206.8 | 210.4 | 48 | 47.1 | 49.9 | 58 | 57.1 | 59.9 | 9.3 |
| M72×6 | 150 | 148.8 | 152.4 | 260 | 258.5 | 263 | 140 | 137.6 | 141.2 | 60 | 58.9 | 62.1 | 260 | 258.5 | 263 | 60 | 58.9 | 62.1 | 72 | 70.9 | 74.1 | 18.5 |
| M80×6 | 170 | 168.5 | 173 | 296 | 294.3 | 299.3 | 160 | 157.3 | 161.3 | 70 | 68.8 | 72.4 | 298 | 296.3 | 301.3 | 68 | 66.8 | 70.4 | 80 | 78.8 | 82.4 | 27.3 |
| M100×6 | 190 | 188.5 | 193 | 330 | 328.3 | 333.3 | 180 | 177 | 181.5 | 80 | 78.8 | 82.4 | 330 | 328.3 | 333.3 | 75 | 73.8 | 77.4 | 88 | 86.8 | 90.4 | 36.4 |
Materials
- Material specified per RFQ — lifting applications require the confirmed load rating in writing; state thread, orientation and duty at quotation
Ordering & documentation
Documents
Shipments of DIN 582 Lifting Eye Nuts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 582 Lifting Eye Nuts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 582 Lifting Eye Nuts), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for DIN 582 Lifting Eye Nuts: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for din 582 lifting eye nuts is 10,000 pieces (applies to the standard sizes and finishes for din 582 lifting eye nuts; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 582 lifting eye nuts run 3–7 days. Quantities or variants of din 582 lifting eye nuts outside the standard range are confirmed at quotation.
Storage & shipping
DIN 582 Lifting Eye Nuts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 582 lifting eye nuts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
Eye nut or eyebolt — how do I choose the lifting point?
The thread decides it. A DIN 580 eyebolt needs a tapped hole it can be screwed into; a DIN 582 eye nut needs a stud or boss with male thread standing proud of the surface. Eye nuts win where the mount already has a stud (cast lifting bosses on castings and moulds) and where the point must be removed often — a nut unscrews without wearing a tapped hole. In both families the rule that breaks hardware is sideways loading: the ring is rated for the loading direction the standard assumes, and a sling that pulls at an angle derates the point sharply, which is why large sizes take a shackle in the ring rather than a hook directly. Give your supplier the thread, the pull direction and the duty cycle, and have the working load limit confirmed in writing.
What is the MOQ and lead time for this nut type?
The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common diameters in this nut type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.
What is the MOQ and lead time for DIN 582 Lifting Eye Nuts?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for DIN 582 Lifting Eye Nuts state?
State the full designation (DIN 582), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 582 Lifting Eye Nuts inquiry
- ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
- ✓ State the nut property class or material and the bolt class/material it must be paired with.
- ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
- ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
- ✓ Factory-direct pricing for your DIN 582 Lifting Eye Nuts
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support