DIN 6924 Nylon-Insert Lock Nuts
Nylon-insert (non-metallic insert) hex lock nuts per DIN 6924 — the full-height prevailing-torque pattern, M3 to M48 in steel classes 5/8/10 and A4 stainless, thread 6H. Current norm designation: DIN EN ISO 7040.
Last updated: 2026-11
Specifications
DIN 6924 is the full-height member of the nylon-insert lock-nut family: a non-metallic (nylon) collar grips the bolt threads by prevailing torque, the same locking principle as the DIN 985 nyloc — see that page for reuse and temperature behavior. The collected standard table runs M3 through M48 with thread tolerance 6H, in steel property classes 5, 8 and 10 and A4 stainless steel, so the size line reaches well past the usual nyloc range for larger assemblies. The national DIN 6924 designation is superseded: the current norm is DIN EN ISO 7040, so order whichever designation your drawing calls out.
| Standard | DIN 6924 — hexagon nut with non-metallic insert; current norm DIN EN ISO 7040 |
|---|---|
| Locking mechanism | Non-metallic (nylon) collar insert grips the bolt threads by prevailing torque |
| Size range | M3 – M48 |
| Dimensions at M10 | Width across flats 16 mm; e (min) 17.77 mm; height 11.5–11.9 mm |
| Thread | 6H |
| Grade pairing | Steel property classes 5, 8, 10; stainless A4 |
| s at M10 | 16 |
| h at M10 | 11,5 - 11,9 |
| m at M10 | 8,04 |
| e at M10 | min 17,77 |
| s at M3 | 5,5 |
| h at M3 | 4,2 - 4,5 |
| m at M3 | 2,15 |
| e at M3 | min 6,01 |
Materials
- Steel
- Stainless steel
DIN 6924 is the all-metal prevailing-torque lock nut, and 'all-metal' is the material decision: with no nylon insert there is nothing to soften — locking comes from thread design and controlled deformation, which is what makes it the choice for high-temperature or corrosive environments where nylon inserts are unsuitable.
The mechanism is the same out-of-round (tri-lobular) thread interference as the Stover pattern: the nut's distorted threads deform elastically against the bolt thread for friction that does not depend on clamping load. That buys roughly 200 C continuous service (spikes to 300 C) and around 5-10 reuse cycles versus the nylon-insert nut's 120 C ceiling and single-use discipline — specify it wherever heat or disassembly cycles would kill a nylon insert.
Ordering & documentation
Documents
Shipments of DIN 6924 Nylon-Insert Lock Nuts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 6924 Nylon-Insert Lock Nuts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 6924 Nylon-Insert Lock Nuts), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for DIN 6924 Nylon-Insert Lock Nuts: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for din 6924 nylon-insert lock nuts is 10,000 pieces (applies to the standard sizes and finishes for din 6924 nylon-insert lock nuts; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 6924 nylon-insert lock nuts run 3–7 days. Quantities or variants of din 6924 nylon-insert lock nuts outside the standard range are confirmed at quotation.
Storage & shipping
DIN 6924 Nylon-Insert Lock Nuts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 6924 nylon-insert lock nuts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
DIN 6924 or DIN 985 — is there a difference?
Both are nylon-insert prevailing-torque lock nuts; the collected standard table lists DIN 6924 (current norm DIN EN ISO 7040) as the full-height pattern running M3 to M48. The practical selection rule is the drawing: order the designation your documentation calls out, and confirm size and height pattern against the order — the nylon locking principle, its reuse behavior and its temperature ceiling are shared with the DIN 985 nyloc covered on that page.
What is the MOQ and lead time for this nut type?
The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common diameters in this nut type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.
What should an RFQ for this nut type state?
State the standard designation (for example DIN 985 or DIN 6923), nominal thread size and pitch (metric coarse unless fine pitch is required), material and strength pairing with the mating bolt, finish (plain, zinc, or hot-dip galvanized where compatible), required certificates such as a mill test report per EN 10204 3.1, and quantity per size — plus destination country.
Related knowledge
- Pairing a Nut to a Bolt: Property Class, Flange vs Hex, and What the Evidence Actually Settles
- Pairing a Nut to a Bolt: Property Class, Height, Engagement and Flange vs Hex
- Thread Locking for Vibration: Nylon Patch, Threadlocker, Safety Wire or Lock Washer — What the Evidence Can Rank
- Pairing a Nut to a Bolt: Property Class, Flange vs Hex, and What the Evidence Actually Settles
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 6924 Nylon-Insert Lock Nuts inquiry
- ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
- ✓ State the nut property class or material and the bolt class/material it must be paired with.
- ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
- ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
- ✓ Factory-direct pricing for your DIN 6924 Nylon-Insert Lock Nuts
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support