ISO 8675 Hex Nuts Low Form, Fine Pitch
ISO 8675 hex nuts low form with metric fine pitch thread M8 to M52 — the thin plain nut with the collected da/dw/e/m/m'/s rows, per-nominal fine-pitch alternates and the 7,85 kg/dm3 mass row.
Last updated: 2026-11
Specifications
The low-form fine-pitch nut is the thin jam-style plain nut: roughly half the height of a standard hex (m nominal 5 at M8 up to 20 at M52), threaded to the fine pitches that give preload control on adjusted and vibration-exposed joints. It works both ways the thin-nut family always has — as a lock partner stacked behind a working nut (jam-nut service, where the two nuts pinch the bolt thread between them) and as the primary nut where joint length is tight but the bolt is fine-pitch. The collected ladder runs M8 to M52 with the source's stacked pitch header rows carried per nominal (M8x1 / M10x1,25 / M12x1,5 ... x1,5/x2/x3 alternates), rows da min./max. (8 → 56,2), dw min. (11,3 → 74,2), e min. (14,38 → 88,25), m nominal=max./min., wrench height m' min. and width across flats s (13 → 80), plus the source's own mass row ("Weight (7,85 kg/dm3) kg/1000pcs": 4 → 580). Verbatim quirks are flagged: the P row prints 1,25 under the M8x1 column and 1 under M10x1, and m min. dips to 8,1 at M20 — both carried, not corrected; confirm the exact pitch per RFQ. Property class and finish are not tabulated — per RFQ.
| Standard | ISO 8675 — hex nuts low form with metric fine pitch thread (thin plain nut, jam-nut service) |
|---|---|
| Size range | M8 – M52; per-nominal fine-pitch alternates (x1 / x1,25 / x1,5 / x2 / x3) per the source's stacked headers |
| Height | m nominal=max. 5 (M8) → 20 (M52) — low form, roughly half a standard hex |
| Hex | s nominal=max. 13 → 80 (min. 12,73 → 78,1); e min. 14,38 → 88,25 |
| Mass | kg/1000 pcs at 7,85 kg/dm3: 4 (M8) → 580 (M52), the source's own row |
| Flagged verbatim | P row prints 1,25 under M8x1 and 1 under M10x1; m min. 8,1 at M20 non-monotone — carried, confirm pitch per RFQ |
| Material / class / finish | Not tabulated by the collected specification — per RFQ |
| Thread d | M8 | M10 | M12 | M14 | M16 | M18 | M20 | M22 | M24 | |
|---|---|---|---|---|---|---|---|---|---|---|
| M8x1 | M10x1 | M12x1,25 | M14x1,5 | M16x1,5 | M18x1,5 | M20x1,5 | M22x1,5 | M24x1,5 | ||
| - | M10x1,25 | M12x1,5 | - | - | M18x2 | M20x2 | M22x2 | M24x2 | ||
| P | 1,25 | 1 | 1,75 | 2 | 2 | 2,5 | 2,5 | 2,5 | 3 | |
| da | min. | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 22 | 24 |
| max | 8,75 | 10,8 | 13 | 15,1 | 17,3 | 19,5 | 21,6 | 23,7 | 25,9 | |
| dw | min. | 11,3 | 15,3 | 17,2 | 20,2 | 22,2 | 25,3 | 28,2 | 29,5 | 33,2 |
| e | min. | 14,38 | 18,9 | 21,1 | 24,49 | 26,75 | 29,56 | 32,95 | 35,03 | 39,55 |
| m | nominal=max. | 5 | 6 | 7 | 8 | 8 | 9 | 9 | 10 | 10 |
| min. | 4,7 | 5,7 | 6,64 | 7,42 | 7,42 | 8,42 | 8,1 | 9,1 | 9,1 | |
| m´ | min. | 3,8 | 4,6 | 5,3 | 5,9 | 5,9 | 6,7 | 6,5 | 7,3 | 7,3 |
| s | nominal=max. | 13 | 17 | 19 | 22 | 24 | 27 | 30 | 32 | 36 |
| min. | 12,73 | 16,73 | 18,67 | 21,67 | 23,67 | 26,16 | 29,16 | 31 | 35 | |
| Weight (7,85 kg/dm3) kg/1000pcs | 4 | 8,6 | 12,1 | 18,2 | 20,1 | 29,6 | 36,3 | 43,8 | 58 |
- Row 3 (P): the P row prints 1,25 under the M8x1 column and 1 under M10x1 - in tension with the fine-pitch size labels above; carried verbatim, confirm pitch per RFQ
- Row 8 (m): m min. prints 8,1 at M20 between M18's 8,42 and M22's 9,1 - a non-monotone dip against the ladder; carried verbatim
| Thread d | M27 | M30 | M33 | M36 | M39 | M42 | (M45) | M48 | M52 | |
|---|---|---|---|---|---|---|---|---|---|---|
| M27x1,5 | M30x1,5 | M33x1,5 | M36x1,5 | M39x1,5 | M42x1,5 | M45x1,5 | M48x1,5 | M52x1,5 | ||
| M27x2 | M30x2 | M33x2 | M36x2 | M39x2 | M42x2 | M45x2 | M48x2 | M52x2 | ||
| - | - | - | M36x3 | M39x3 | M42x3 | M45x3 | M48x3 | M52x3 | ||
| P | 3 | 3,5 | 3,5 | 4 | 4 | 4,5 | 4,5 | 5 | 5 | |
| da | min. | 27 | 30 | 33 | 36 | 39 | 42 | 45 | 48 | 52 |
| max | 29,1 | 32,4 | 35,6 | 38,9 | 42,1 | 45,4 | 48,6 | 51,8 | 56,2 | |
| dw | min. | 38 | 42,7 | 46,6 | 51,1 | 55,9 | 60,6 | 64,7 | 69,4 | 74,2 |
| e | min. | 45,2 | 50,85 | 55,37 | 60,79 | 66,44 | 71,3 | 76,95 | 82,6 | 88,25 |
| m | nominal=max. | 12 | 12 | 14 | 14 | 16 | 16 | 18 | 18 | 20 |
| min. | 10,9 | 10,9 | 12,9 | 12,9 | 14,9 | 14,9 | 16,9 | 16,9 | 18,7 | |
| m´ | min. | 8,7 | 8,7 | 10,3 | 10,3 | 11,9 | 11,9 | 13,5 | 13,5 | 15 |
| s | nominal=max. | 41 | 46 | 50 | 55 | 60 | 65 | 70 | 75 | 80 |
| min. | 40 | 45 | 49 | 53,8 | 58,8 | 63,1 | 68,1 | 73,1 | 78,1 | |
| Weight (7,85 kg/dm3) kg/1000pcs | 90 | 110 | 155 | 190 | 260 | 307 | 400 | 460 | 580 |
Materials
- Property class and finish specified per RFQ — thin nuts commonly run class 04/05 (jam service) or matched to the bolt for primary duty; state the pitch you are threading onto (the ladder stacks alternates per nominal) and the jam-nut or primary-nut role at quotation
Ordering & documentation
Documents
Shipments of ISO 8675 Hex Nuts Low Form, Fine Pitch are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 8675 Hex Nuts Low Form, Fine Pitch orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (ISO 8675 Hex Nuts Low Form, Fine Pitch), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for ISO 8675 Hex Nuts Low Form, Fine Pitch: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for iso 8675 hex nuts low form, fine pitch is 10,000 pieces (applies to the standard sizes and finishes for iso 8675 hex nuts low form, fine pitch; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for iso 8675 hex nuts low form, fine pitch run 3–7 days. Quantities or variants of iso 8675 hex nuts low form, fine pitch outside the standard range are confirmed at quotation.
Storage & shipping
ISO 8675 Hex Nuts Low Form, Fine Pitch are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 8675 hex nuts low form, fine pitch dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
This low-form nut, or the all-metal prevailing-torque nut — how do I choose for a fine-pitch joint?
Two different jobs. As a jam pair (two nuts locked against each other), the low-form nut is the classic: the collected height row shows m at roughly half a standard hex, so stacked they add little length while the pinch between them holds. As a single lock, the prevailing-torque type (ISO 7042, in this catalog) does the job alone with no second nut and no thread damage — but its clamp section needs bolt protrusion. The collected ISO 8675 ladder covers M8 – M52 with fine-pitch alternates per nominal, which is exactly the pitch range where fine-thread preload control earns its keep. Two capture quirks are flagged and not normalized: the P row prints 1,25 under M8x1 and 1 under M10x1 (in tension with the pitch labels), and m min. dips at M20 — confirm the pitch you order per RFQ. The mass row (7,85 kg/dm3 basis, 4 → 580 kg/1000) is the source's own carbon-steel figure. Class and finish per RFQ.
What is the MOQ and lead time for ISO 8675 Hex Nuts Low Form, Fine Pitch?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for ISO 8675 Hex Nuts Low Form, Fine Pitch state?
State the full designation (ISO 8675), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your ISO 8675 Hex Nuts Low Form, Fine Pitch inquiry
- ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
- ✓ State the nut property class or material and the bolt class/material it must be paired with.
- ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
- ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
- ✓ Factory-direct pricing for your ISO 8675 Hex Nuts Low Form, Fine Pitch
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support