NAS1291 Low-Height Self-Locking Hex Nuts

Hexagon self-locking low-height, lightweight nuts per NAS1291 — dash numbers -02 (.0860-56 UNJC-3B) through -10 (.6250-18 UNJF-3B) in steel for 450°F service (cadmium plate with dry film lubricant) or A286 CRES for 450/800°F (silver plated), with per-size dimensions, weights and minimum axial tensile strengths from the standard sheet.

Last updated: 2026-11

Request a Quote

NAS1291 Low-Height Self-Locking Hex Nuts in an industrial setting
Illustrative image redrawn from real NAS1291 Low-Height Self-Locking Hex Nuts product references — not a photograph of stocked items.

Specifications

NAS1291 is the aerospace answer to "hold a joint in a thin envelope": a hex nut roughly as tall as it needs to be and no more — the standard titles it low height, light weight — with an all-metal locking feature instead of a nylon insert, so the lock survives the temperature classes the standard defines: steel nuts rated 450°F, A286 corrosion-resistant steel nuts available for 450°F (dry film lubricant) or 800°F service (silver plated). The standard sheet runs the full dash-number ladder from -02 (.0860-56 UNJC-3B) through -10 (.6250-18 UNJF-3B) and tabulates, per size: the A width across flats minimum/maximum, B and C envelope minimums, the ØD countersink-relief diameter, the ØF bearing face, H height, J and S geometry limits, ØW maximum, weight per 100 pieces and — the rows aerospace buyers quote — minimum axial tensile strength in pounds, which at -7 (.4375-20) reads 20,600 lbf in steel and 15,450 lbf in A286. Part numbering carries the material and lubrication in the dash suffix: plain dash = steel, cadmium plated with dry film lubricant; X = steel without lubricant; C = A286; M suffix = with approved dry film lubricant. The sheet notes the smallest steel dash numbers (-02 through -6 and their X variants) and C04–C6 are inactive for new design (superseded by NASM21042/NASM21043), and that the -8/-9/-10 nuts are not intended for use with short-thread screws. Steel hardness is capped at Rockwell C49 maximum by the sheet.

Standard NAS1291 — nut, self-locking, hexagon, low height, light weight (AIA/NAS part standard, rev 13)
Size range Dash -02 (.0860-56 UNJC-3B) through -10 (.6250-18 UNJF-3B); -02 to -08 coarse UNJC, -3 upward fine UNF per dash table
Dimensions at dash -7 (.4375-20 UNJF-3B) A min/max 0.313/0.328 in; B min/max 0.494/0.504 in; C min 0.562 in; ØD min/max 0.437/0.467 in; ØF min 0.680 in; H min 0.160 in; ØW max 0.708 in
Strength at dash -7 Axial tensile strength minimum 20,600 lbf (steel, 450°F); 15,450 lbf (A286 CRES)
Materials & service Steel 450°F — cadmium plate per AMS-QQ-P-416 class 1 or 2 plus dry film lubricant per NASM25027; A286 CRES — silver plate per AMS2410 for 800°F, or dry film lubricant for 450°F; steel hardness Rockwell C49 max
Strength basis Steel minimum tensile per table based on 160,000 psi (98% of basic pitch diameter area per ASME B1.1, 100% from .3750 up); A286 values based on 125,000 psi per NASM25027
Design notes Dash -02 through -6 / X02 through X6 and C04–C6 inactive for new design (see NASM21042 / NASM21043); legacy "A" material code inactive — use "C" for A286; -8/-9/-10 not intended for short-thread screws
NAS1291 low-height self-locking hex nuts - dash-number ladder, dimensions (sheet 1)All dimensions in inches, per NAS1291 rev 13. Dash -02 through -6 / X02 through X6 and C04–C6 are inactive for new design per the standard sheet (see NASM21042 / NASM21043); the "A" material code is inactive — use "C".
ThreadDash no. (steel, cad + dry film lube)Dash no. (steel, unlubricated)Dash no. (A286, dry film lube)Dash no. (A286, silver plated)Dash no. (A286, dry film lube, legacy "A" code)Dash no. (A286, silver plated, legacy "A" code)A min (in)A max (in)B min (in)B max (in)C min (in)ØD min (in)ØD max (in)
.0860-56 UNJC-3B02X02C02MC02A02MA02.080.100.122.127.138.086.106
.1120-40 UNJC-3B04X04C04MC04A04MA04.103.125.150.158.171.112.142
.1380-32 UNJC-3B06X06C06MC06A06MA06.115.141.181.190.207.138.168
.1640-32 UNJC-3B08X08C08MC08A08MA08.125.188.213.221.244.164.194
.1900-32 UNJF-3B3X3C3MC3A3MA3.154.188.243.252.277.190.220
.2500-28 UNJF-3B4X4C4MC4A4MA4.204.219.304.316.347.250.280
.3125-24 UNJF-3B5X5C5MC5A5MA5.251.266.367.378.419.312.342
.3750-24 UNJF-3B6X6C6MC6A6MA6.267.282.430.440.491.375.405
.4375-20 UNJF-3B7X7C7MC7A7MA7.313.328.494.504.562.437.467
.5000-20 UNJF-3B8X8C8MC8A8MA8.350.410.556.566.633.500.530
.5625-18 UNJF-3B9X9C9MC9A9MA9.420.480.680.692.775.562.592
.6250-18 UNJF-3B10X10C10MC10A10MA10.490.550.743.755.846.625.655
NAS1291 low-height self-locking hex nuts - geometry, weight and tensile strength (sheet 2)Dimensions in inches; weight per 100 pieces; tensile strengths in lbf minimum (450°F steel / A286 CRES per the standard sheet).
ThreadØF min (in)H min (in)J min (in)S max (in)ØW max (in)Weight (lbs per 100)Axial tensile strength, steel, lbf minAxial tensile strength, A286 CRES, lbf min
.0860-56 UNJC-3B.137.045.008.0025.167.02660465
.1120-40 UNJC-3B.176.050.010.003.206.051,110760
.1380-32 UNJC-3B.214.055.010.003.244.081,6701,150
.1640-32 UNJC-3B.260.060.015.003.290.152,4901,720
.1900-32 UNJF-3B.290.065.015.003.330.183,4702,460
.2500-28 UNJF-3B.386.090.019.003.420.356,2004,580
.3125-24 UNJF-3B.482.120.023.004.520.609,8207,390
.3750-24 UNJF-3B.575.125.030.004.620.8015,20011,450
.4375-20 UNJF-3B.680.160.035.005.7081.320,60015,450
.5000-20 UNJF-3B.786.225.040.005.8142.127,50021,110
.5625-18 UNJF-3B.874.320.045.006.9123.634,80026,810
.6250-18 UNJF-3B.976.365.050.0071.0144.543,60034,130

Materials

  • Steel (cadmium plated, dry film lubricated)
  • A286 CRES (UNS S66286, per AMS5732/AMS5737/AMS5525 chemistry)

Ordering & documentation

Documents

Shipments of NAS1291 Low-Height Self-Locking Hex Nuts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for NAS1291 Low-Height Self-Locking Hex Nuts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (NAS1291 Low-Height Self-Locking Hex Nuts), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for NAS1291 Low-Height Self-Locking Hex Nuts: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for nas1291 low-height self-locking hex nuts is 10,000 pieces (applies to the standard sizes and finishes for nas1291 low-height self-locking hex nuts; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for nas1291 low-height self-locking hex nuts run 3–7 days. Quantities or variants of nas1291 low-height self-locking hex nuts outside the standard range are confirmed at quotation.

Storage & shipping

NAS1291 Low-Height Self-Locking Hex Nuts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store nas1291 low-height self-locking hex nuts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

How do I read a NAS1291 part number?

The dash number selects the thread size (-7 is .4375-20 UNJF-3B, for example), and the letter prefix selects material and lubrication: plain dash = steel, cadmium plated with an approved dry film lubricant for 450°F; X prefix = steel without any lubricant coating; C prefix = A286 corrosion-resistant steel, with an M suffix when dry film lubricated (450°F) or silver plated bare for 800°F. The legacy "A" prefix that once designated A286 is inactive for new design — the standard sheet directs new callouts to the "C" code. Note the sheet lists the smallest dash numbers as inactive for new design as well, so a legacy -04 callout should be checked against its superseding NASM part before ordering.

Why choose an all-metal NAS1291 over a nylon-insert lock nut?

Temperature and consistency. A nylon insert loses its locking behaviour as it approaches its softening range and varies with installation speed; the NAS1291 all-metal lock is rated by the standard to 450°F in lubricated steel and 800°F in silver-plated A286, and its locking torque is specified per size (minimum break-away 0.2 in-lb at dash -02 and 0.5 in-lb at dash -04 per the sheet, larger sizes per NASM25027). The costs are a lower re-use count than an elast insert and the need to state the temperature class with the order — the X (unlubricated) and M (lubricated) variants are different parts with different service ratings.

What is the MOQ and lead time for this nut type?

The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Confirm the exact schedule against quantity and size mix at quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your NAS1291 Low-Height Self-Locking Hex Nuts inquiry

  • ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
  • ✓ State the nut property class or material and the bolt class/material it must be paired with.
  • ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
  • ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
  • ✓ Factory-direct pricing for your NAS1291 Low-Height Self-Locking Hex Nuts
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.