ISO 8673 Hex Regular Nuts (Fine Pitch)

ISO 8673 hexagon regular nuts with metric fine pitch thread, M8×1 to M64×4 — the standard-height hex nut in the fine-pitch series, with the collected per-size tables: pitch options, c, d a, d w, e, m, m w and s.

Last updated: 2026-11

Request a Quote

ISO 8673 Hex Regular Nuts (Fine Pitch) in an industrial setting
Illustrative image redrawn from real ISO 8673 Hex Regular Nuts (Fine Pitch) product references — not a photograph of stocked items.

Specifications

ISO 8673 is the regular (standard-height) hex nut of the metric fine-pitch series — the nut that pairs with ISO 8765 fine-pitch bolts and ISO 8676 fine-pitch screws, and the replacement designation for the DIN 982-era coarse assumptions when a joint needs a finer thread. Why fine pitch: a finer helix angles the thread flanks so the same clamp comes from lower torque, the nut backs off less under vibration because each turn moves it less, and adjustment on a threaded rod is finer. The collected tables run M8×1 through M64×4 (parenthesized sizes are the non-preferred series as printed), tabulating per size the pitch options — the source prints a Fine thread-1 / Fine thread-2 pair per size where two fine pitches exist, and on the Fine thread-2 row it merges the minus sign into the value ("-1.25", "-1.5"), kept verbatim and disclosed so confirm the intended pitch at RFQ — plus chamfer c, washer-face d a, bearing-face d w, across-corners e, height m (max/min), the m w bearing check and across-flats s. Property classes, materials and finishes are not printed by the collected specification and stay per RFQ.

Standard ISO 8673 — hexagon regular nuts, style 1, with metric fine pitch thread
Series M8×1 – M64×4 (seven source column groups; parenthesized sizes are the non-preferred series as printed)
Tabulated geometry Per size: pitch (Fine thread-1/2 options as printed), c (max/min), d a (max/min), d w (min), e (min), m (max/min, 6.8–51 mm), m w (min), s (max=nominal/min, 13–95 mm)
Function Standard-height clamp nut for fine-pitch bolted joints — lower torque for the same clamp, finer adjustment, better vibration behaviour than the coarse series
Property classes / materials Not tabulated by the collected specification — per RFQ
ISO 8673 hex regular nuts (fine pitch) - per-size dimensions (M8 - M12)All dimensions in millimeters. Attribute labels follow the source: P = thread pitch (the source prints 'Fine thread-1' / 'Fine thread-2' pitch options per size, '-' where a fine pitch does not apply — and on the Fine thread-2 row the source merges the '-' into the pitch value, printing '-1.25' / '-1.5' where a fine-2 pitch exists; kept verbatim); c = washer-face/chamfer height; d a = washer-face diameter; d w = bearing-face diameter; e = width across corners; m = nut height; m w = countersunk-check height; s = width across flats, max = nominal size. Parenthesized sizes are the non-preferred series as printed. Property classes, materials and finishes are not tabulated by the collected specification.
AttributeM8M10M12
P — Pitch — Fine thread-1111.5
Fine thread-2--1.25-1.25
c — max0.60.60.6
min0.150.150.15
d a — max8.7510.813
min81012
d w — min11.6314.6316.63
e — min14.3817.7720.03
m — max6.88.410.8
min6.448.0410.37
m w — min5.156.438.3
s — max=nominal size131618
min12.7315.7317.73
ISO 8673 hex regular nuts (fine pitch) - per-size dimensions ((M14) - (M18))All dimensions in millimeters. Attribute labels follow the source: P = thread pitch (the source prints 'Fine thread-1' / 'Fine thread-2' pitch options per size, '-' where a fine pitch does not apply — and on the Fine thread-2 row the source merges the '-' into the pitch value, printing '-1.25' / '-1.5' where a fine-2 pitch exists; kept verbatim); c = washer-face/chamfer height; d a = washer-face diameter; d w = bearing-face diameter; e = width across corners; m = nut height; m w = countersunk-check height; s = width across flats, max = nominal size. Parenthesized sizes are the non-preferred series as printed. Property classes, materials and finishes are not tabulated by the collected specification.
Attribute(M14)M16(M18)
P — Pitch — Fine thread-11.51.51.5
Fine thread-2---
c — max0.60.80.8
min0.150.20.2
d a — max15.117.319.5
min141618
d w — min19.6422.4924.85
e — min23.3626.7529.56
m — max12.814.815.8
min12.114.115.1
m w — min9.6811.2812.08
s — max=nominal size212427
min20.6723.6726.16
ISO 8673 hex regular nuts (fine pitch) - per-size dimensions (M20 - M24)All dimensions in millimeters. Attribute labels follow the source: P = thread pitch (the source prints 'Fine thread-1' / 'Fine thread-2' pitch options per size, '-' where a fine pitch does not apply — and on the Fine thread-2 row the source merges the '-' into the pitch value, printing '-1.25' / '-1.5' where a fine-2 pitch exists; kept verbatim); c = washer-face/chamfer height; d a = washer-face diameter; d w = bearing-face diameter; e = width across corners; m = nut height; m w = countersunk-check height; s = width across flats, max = nominal size. Parenthesized sizes are the non-preferred series as printed. Property classes, materials and finishes are not tabulated by the collected specification.
AttributeM20(M22)M24
P — Pitch — Fine thread-121.52
Fine thread-2-1.5--
c — max0.80.80.8
min0.20.20.2
d a — max21.623.725.9
min202224
d w — min27.731.3533.25
e — min32.9537.2939.55
m — max1819.421.5
min16.918.120.2
m w — min13.5214.4816.16
s — max=nominal size303436
min29.163335
ISO 8673 hex regular nuts (fine pitch) - per-size dimensions ((M27) - (M33))All dimensions in millimeters. Attribute labels follow the source: P = thread pitch (the source prints 'Fine thread-1' / 'Fine thread-2' pitch options per size, '-' where a fine pitch does not apply — and on the Fine thread-2 row the source merges the '-' into the pitch value, printing '-1.25' / '-1.5' where a fine-2 pitch exists; kept verbatim); c = washer-face/chamfer height; d a = washer-face diameter; d w = bearing-face diameter; e = width across corners; m = nut height; m w = countersunk-check height; s = width across flats, max = nominal size. Parenthesized sizes are the non-preferred series as printed. Property classes, materials and finishes are not tabulated by the collected specification.
Attribute(M27)M30(M33)
P — Pitch — Fine thread-1222
Fine thread-2---
c — max0.80.80.8
min0.20.20.2
d a — max29.132.435.6
min273033
d w — min3842.7546.55
e — min45.250.8555.37
m — max23.825.628.7
min22.524.327.4
m w — min1819.4421.92
s — max=nominal size414650
min404549
ISO 8673 hex regular nuts (fine pitch) - per-size dimensions (M36 - M42)All dimensions in millimeters. Attribute labels follow the source: P = thread pitch (the source prints 'Fine thread-1' / 'Fine thread-2' pitch options per size, '-' where a fine pitch does not apply — and on the Fine thread-2 row the source merges the '-' into the pitch value, printing '-1.25' / '-1.5' where a fine-2 pitch exists; kept verbatim); c = washer-face/chamfer height; d a = washer-face diameter; d w = bearing-face diameter; e = width across corners; m = nut height; m w = countersunk-check height; s = width across flats, max = nominal size. Parenthesized sizes are the non-preferred series as printed. Property classes, materials and finishes are not tabulated by the collected specification.
AttributeM36(M39)M42
P — Pitch — Fine thread-1333
Fine thread-2---
c — max0.811
min0.20.30.3
d a — max38.942.145.4
min363942
d w — min51.1155.8659.95
e — min60.7966.4471.3
m — max3133.434
min29.431.832.4
m w — min23.5225.4425.92
s — max=nominal size556065
min53.858.863.1
ISO 8673 hex regular nuts (fine pitch) - per-size dimensions ((M45) - (M52))All dimensions in millimeters. Attribute labels follow the source: P = thread pitch (the source prints 'Fine thread-1' / 'Fine thread-2' pitch options per size, '-' where a fine pitch does not apply — and on the Fine thread-2 row the source merges the '-' into the pitch value, printing '-1.25' / '-1.5' where a fine-2 pitch exists; kept verbatim); c = washer-face/chamfer height; d a = washer-face diameter; d w = bearing-face diameter; e = width across corners; m = nut height; m w = countersunk-check height; s = width across flats, max = nominal size. Parenthesized sizes are the non-preferred series as printed. Property classes, materials and finishes are not tabulated by the collected specification.
Attribute(M45)M48(M52)
P — Pitch — Fine thread-1334
Fine thread-2---
c — max111
min0.30.30.3
d a — max48.651.856.2
min454852
d w — min64.769.4574.2
e — min76.9582.688.25
m — max363842
min34.436.440.4
m w — min27.5229.1232.32
s — max=nominal size707580
min68.173.178.1
ISO 8673 hex regular nuts (fine pitch) - per-size dimensions (M56 - M64)All dimensions in millimeters. Attribute labels follow the source: P = thread pitch (the source prints 'Fine thread-1' / 'Fine thread-2' pitch options per size, '-' where a fine pitch does not apply — and on the Fine thread-2 row the source merges the '-' into the pitch value, printing '-1.25' / '-1.5' where a fine-2 pitch exists; kept verbatim); c = washer-face/chamfer height; d a = washer-face diameter; d w = bearing-face diameter; e = width across corners; m = nut height; m w = countersunk-check height; s = width across flats, max = nominal size. Parenthesized sizes are the non-preferred series as printed. Property classes, materials and finishes are not tabulated by the collected specification.
AttributeM56(M60)M64
P — Pitch — Fine thread-1444
Fine thread-2---
c — max111
min0.30.30.3
d a — max60.564.869.1
min566064
d w — min78.6683.4188.16
e — min93.5699.21104.86
m — max454851
min43.446.449.1
m w — min34.7237.1239.28
s — max=nominal size859095
min82.887.892.8

Materials

  • Material and property class specified per RFQ — state the mating bolt grade and pitch at quotation

Ordering & documentation

Documents

Shipments of ISO 8673 Hex Regular Nuts (Fine Pitch) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 8673 Hex Regular Nuts (Fine Pitch) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ISO 8673 Hex Regular Nuts (Fine Pitch)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for ISO 8673 Hex Regular Nuts (Fine Pitch): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for iso 8673 hex regular nuts (fine pitch) is 10,000 pieces (applies to the standard sizes and finishes for iso 8673 hex regular nuts (fine pitch); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for iso 8673 hex regular nuts (fine pitch) run 3–7 days. Quantities or variants of iso 8673 hex regular nuts (fine pitch) outside the standard range are confirmed at quotation.

Storage & shipping

ISO 8673 Hex Regular Nuts (Fine Pitch) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 8673 hex regular nuts (fine pitch) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

How do I order the right fine pitch on an ISO 8673 nut?

The size alone is not enough — fine-pitch series carry two pitches at many diameters. M10 exists as 10×1.25 and 10×1; M12 as 12×1.5 and 12×1.25; M20 as 20×2 and 20×1.5. A nut that fits the bolt blank will still jam if the pitch is wrong, and the collected table prints both options per size, so read the P rows first and name the pitch explicitly (M12×1.25, not "fine M12") on the RFQ. One transcription note: the collected page prints the second pitch row with the minus sign merged into the value ("-1.25"), a quirk of the source kept verbatim in the tables and disclosed in the unit note — treat the digits after the minus as the pitch and confirm against the mating screw before release.

What is the MOQ and lead time for this nut type?

The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common sizes in this nut type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

What is the MOQ and lead time for ISO 8673 Hex Regular Nuts (Fine Pitch)?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for ISO 8673 Hex Regular Nuts (Fine Pitch) state?

State the full designation (ISO 8673), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ISO 8673 Hex Regular Nuts (Fine Pitch) inquiry

  • ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
  • ✓ State the nut property class or material and the bolt class/material it must be paired with.
  • ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
  • ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
  • ✓ Factory-direct pricing for your ISO 8673 Hex Regular Nuts (Fine Pitch)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.