ISO 10511 Nylon-Insert Jam Nuts (Hex, Thin Height)
ISO 10511 hex nuts with nylon insert at jam-nut height — coarse thread M3 to M36 with source gaps at M22/M24/M27, grade A/B print, full dimension ladder with insert gripping length.
Last updated: 2026-11
Specifications
ISO 10511 is the thin ("jam") height counterpart of the DIN 985-style nyloc: a hex nut of reduced thickness whose collar of nylon grips the bolt thread and resists loosening without a separate lock washer. The jam-height body matters where stacking height or thread exposure is limited — a standard nyloc would add a full nut height of stack, while this insert nut locks with roughly half of it, and the prevailing torque still comes from the nylon rather than from friction against a mating surface. The source ladder prints product grade A through M16 and grade B from M20 upward, with the insert's effective gripping length (mw min) tabulated alongside the usual nut geometry: da, the bearing-face dw, the width-across-flats e/s window and the h height band. One reading note for RFQ use: the printed ladder is coarse-thread only, with gaps at M22, M24 and M27 — a fine-pitch variant is not tabulated on this source, so a fine-pitch requirement is a separate quotation question, not a table lookup.
| Standard / scope | ISO 10511 — hex nuts with nylon insert, jam (thin) height; coarse thread series, sizes M3 to M36 in the source ladder with M22/M24/M27 not tabulated by the source |
|---|---|
| Height / style | jam-nut height body (h max 3.90 at M3 rising to 25.5 at M36; h min 3.42 to 23.4) with the nylon collar as the locking element — the thin counterpart of a full-height DIN 985 nyloc |
| Product grade | grade A printed through M16; grade B from M20 upward (per the source table's Product Grade column) |
| Thread series | coarse only on the source print (pitch 0.5 at M3 rising to 4.0 at M36); no fine-pitch ladder is tabulated on this source |
| Width across flats | s max/min printed per size: 5.50/5.32 at M3, 13.00/12.73 at M8, 18.00/17.73 at M12, 30.00/29.16 at M20, 55.0/53.8 at M36 |
| Insert gripping length | mw min tabulated per size (1.24 at M3, 2.96 at M8, 4.56 at M12, 7.28 at M20, 13.52 at M36) — the effective nylon ring length that carries the prevailing torque |
| Bearing face and thread clearance | da max/min (e.g. 13/12 at M12) and dw min (e.g. 16.6 at M12) printed per size for seating and clearance checks |
| Anomaly note | the source calculator dump repeated the M4 and M16 rows verbatim; the duplicates were collapsed (values identical) and the M22/M24/M27 gaps are carried as printed |
| Not tabulated | fine-pitch ladder, operating temperature limits of the insert, MOQ, lead time and price — the last three are confirmed at quotation |
| Thread size | Product grade | Pitch (mm) | da max (mm) | da min (mm) | dw min (mm) | e min (mm) | h max (mm) | h min (mm) | m min (mm) | mw min (mm) | s max (mm) | s min (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | A | 0.5 | 3.45 | 3.00 | 4.6 | 6.01 | 3.90 | 3.42 | 1.55 | 1.24 | 5.50 | 5.32 |
| 4 | A | 0.7 | 4.6 | 4.0 | 5.9 | 7.66 | 5.00 | 4.52 | 1.95 | 1.56 | 7.00 | 6.78 |
| 6 | A | 1 | 6.75 | 6.00 | 8.9 | 11.05 | 6.00 | 5.52 | 2.9 | 2.32 | 10.00 | 9.78 |
| 8 | A | 1.25 | 8.75 | 8.00 | 11.6 | 14.38 | 6.76 | 6.18 | 3.7 | 2.96 | 13.00 | 12.73 |
| 10 | A | 1.5 | 10.8 | 10.0 | 14.6 | 17.77 | 8.56 | 7.98 | 4.7 | 3.76 | 16.00 | 15.73 |
| 12 | A | 1.75 | 13 | 12 | 16.6 | 20.03 | 10.23 | 9.53 | 5.7 | 4.56 | 18.00 | 17.73 |
| 14 | A | 2 | 15.1 | 14.0 | 19.6 | 23.35 | 11.32 | 10.22 | 6.42 | 5.14 | 21.00 | 20.67 |
| 16 | A | 2 | 17.3 | 16.0 | 22.5 | 26.75 | 12.42 | 11.32 | 7.42 | 5.94 | 24.00 | 23.67 |
| 20 | B | 2.5 | 21.6 | 20.0 | 27.7 | 32.95 | 14.9 | 13.1 | 9.1 | 7.28 | 30.00 | 29.16 |
| 30 | B | 3.5 | 32.4 | 30.0 | 42.8 | 50.85 | 22.2 | 20.1 | 13.9 | 11.12 | 46 | 45 |
| 36 | B | 4 | 38.9 | 36.0 | 51.1 | 60.79 | 25.5 | 23.4 | 16.9 | 13.52 | 55.0 | 53.8 |
Materials
- Nylon-insert jam nuts order in steel (typically zinc-plated for the common grades, with the insert as a separate polymer ring) — the source page is a dimension reference and does not print material/finish stocks; state thread size, grade A or B preference, and any insert temperature requirement on the RFQ. Commercial terms (MOQ, lead time, price) are confirmed at quotation.
Ordering & documentation
Documents
Shipments of ISO 10511 Nylon-Insert Jam Nuts (Hex, Thin Height) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 10511 Nylon-Insert Jam Nuts (Hex, Thin Height) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (ISO 10511 Nylon-Insert Jam Nuts (Hex, Thin Height)), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for ISO 10511 Nylon-Insert Jam Nuts (Hex, Thin Height): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for iso 10511 nylon-insert jam nuts (hex, thin height) is 10,000 pieces (applies to the standard sizes and finishes for iso 10511 nylon-insert jam nuts (hex, thin height); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for iso 10511 nylon-insert jam nuts (hex, thin height) run 3–7 days. Quantities or variants of iso 10511 nylon-insert jam nuts (hex, thin height) outside the standard range are confirmed at quotation.
Storage & shipping
ISO 10511 Nylon-Insert Jam Nuts (Hex, Thin Height) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 10511 nylon-insert jam nuts (hex, thin height) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
Why choose an ISO 10511 jam-height nyloc over a full-height DIN 985 nylon-insert nut?
Both lock the same way — a nylon collar gripping the bolt thread — so the choice is about stack height and duty. The jam height runs roughly half a full nut tall (h max 3.90 mm at M3 versus a full nyloc's taller body), which helps where the fastener must not protrude past a fixed thread length, where a second jam nut is stacked back-to-back in a classic jam-nut pair, or where clearance to a rotating part is tight. The trade-off is thread engagement: a thin nut has fewer engaged threads, so on long, high-vibration joints the common practice is either the jam-plus-full-nut pair or stepping up to the full-height nut. The printed table on this page gives the h band and the insert gripping length (mw min) per size so the stack and the lock margin can be checked against the actual bolt length before ordering.
What do the M22/M24/M27 gaps in the table mean for ordering?
They are gaps in the collected source ladder, not a statement that the size does not exist: the source prints M20 then M30, skipping M22, M24 and M27. If your joint calls for one of those sizes, treat it as a quotation item — supply the thread size and let the availability and dimensions be confirmed against stock, rather than interpolating a row that no source printed. The same fail-closed rule applies to fine pitch: this page carries coarse thread only, because that is all the source tabulates.
How does the nylon insert behave at temperature, and is that tabulated here?
The insert is the working part — it is what produces the prevailing torque — and its grip falls off as temperature rises toward the polymer's limit, which is why high-temperature joints use all-metal locknuts instead. The collected source is a dimension reference and does not tabulate insert temperature ratings, so this page does not state them; if the application runs hot, flag the operating temperature on the RFQ and the insert material can be confirmed at quotation. What the table does give you is the mw min gripping length per size — the geometric quantity that determines how much nylon engagement the lock actually has.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your ISO 10511 Nylon-Insert Jam Nuts (Hex, Thin Height) inquiry
- ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
- ✓ State the nut property class or material and the bolt class/material it must be paired with.
- ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
- ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
- ✓ Factory-direct pricing for your ISO 10511 Nylon-Insert Jam Nuts (Hex, Thin Height)
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support