DIN 917 Hex Cap Nuts — Low Type
DIN 917 hex cap nuts, low type, M4 to M72 — the domed hex nut that covers the thread end, in the low-domed height for compact joints — with the collected per-size tables across seven column groups, including the source's series 1/2/3 thread rows.
Last updated: 2026-11
Specifications
DIN 917 is the low-type hex cap nut: a standard hex nut body closed by a low dome that hides the protruding bolt end. The covered thread is why it gets specified — no snagged threads on exposed studs, no corrosion starting in the exposed first turns, and a finished look on guards, handles and architectural hardware. The "low type" dome keeps the overall height h close to a plain nut plus a modest cap, so it substitutes where a tall cap nut would not fit. The collected tables span M4 to M72 in seven source column groups, and they carry the standard's thread-series structure verbatim: the P (pitch), x and g rows are split into series 1/2/3 sub-rows — coarse thread plus two fine-thread series — with "/" (and occasionally "-") where a series does not cover the size, all reproduced and disclosed in the unit notes. Also tabulated per size: d a, d w, across corners e, height h, r, across flats s, cap depth t and w. Parenthesized sizes are the non-preferred series as printed. Property classes and finishes are not tabulated by the collected specification and stay per RFQ.
| Standard | DIN 917 — hex cap nuts, low type (domed covering nuts for protruding bolt/stud ends) |
|---|---|
| Series | M4 – M72 (seven source column groups; parenthesized sizes non-preferred as printed) |
| Tabulated geometry | Per size: pitch P (series 1/2/3 rows as printed), d a, d w (min), e (min), x and g (series rows), height h (max=nominal/min), r (≈), s (max=nominal/min), cap depth t (max/min), w (min), mass per 1000 ≈ kg |
| Function | Dome covers the thread end: protection, corrosion delay and finished appearance in one nut |
| Materials / strength | Not tabulated by the collected specification — per RFQ |
| Attribute | M4 | M5 | M6 |
|---|---|---|---|
| P — Coarse thread, series 1 | 0.7 | 0.8 | 1 |
| P — Fine thread, series 2 | / | / | / |
| P — series 3 | / | / | / |
| d a — max | 4.6 | 5.75 | 6.75 |
| d a — min | 4 | 5 | 6 |
| d w — min | 5.9 | 6.9 | 8.9 |
| e — min | 7.66 | 8.79 | 11.05 |
| x — max, series 1 | 1.05 | 1.2 | 1.5 |
| x — series 2 | / | / | / |
| x — series 3 | / | / | / |
| g — max, series 1 | 2.75 | 3 | 3.7 |
| g — series 2 | / | / | / |
| g — series 3 | / | / | / |
| h — max=nominal size | 5.5 | 7 | 9 |
| h — min | 5.2 | 6.64 | 8.64 |
| r — ≈ | 8 | 10 | 12 |
| s — max=nominal size | 7 | 8 | 10 |
| s — min | 6.78 | 7.78 | 9.78 |
| t — max | 4.64 | 5.44 | 7.29 |
| t — min | 4.16 | 4.96 | 6.71 |
| w — min | 1 | 1 | 1.5 |
| per 1000 units ≈ kg | 1.3 | 2.2 | 4 |
| Attribute | M8 | M10 | M12 |
|---|---|---|---|
| P — Coarse thread, series 1 | 1.25 | 1.5 | 1.75 |
| P — Fine thread, series 2 | 1 | 1.25 | 1.5 |
| P — series 3 | / | 1 | 1.25 |
| d a — max | 8.75 | 10.8 | 13 |
| d a — min | 8 | 10 | 12 |
| d w — min | 11.6 | 14.6 | 16.6 |
| e — min | 14.38 | 17.77 | 20.03 |
| x — max, series 1 | 1.87 | 2.25 | 3.5 |
| x — series 2 | 1.5 | 1.87 | 3 |
| x — series 3 | / | 1.5 | 2.5 |
| g — max, series 1 | 4.9 | 5.6 | 6.4 |
| g — series 2 | 3.7 | 4.9 | 5.6 |
| g — series 3 | / | 3.7 | 4.9 |
| h — max=nominal size | 12 | 14 | 16 |
| h — min | 11.57 | 13.57 | 15.57 |
| r — ≈ | 15 | 20 | 25 |
| s — max=nominal size | 13 | 16 | 18 |
| s — min | 12.73 | 15.73 | 17.73 |
| t — max | 9.79 | 11.35 | 13.85 |
| t — min | 9.21 | 10.65 | 13.15 |
| w — min | 2 | 2 | 2 |
| per 1000 units ≈ kg | 9.5 | 15.6 | 23 |
| Attribute | (M14) | M16 | (M18) |
|---|---|---|---|
| P — Coarse thread, series 1 | 2 | 2 | 2.5 |
| P — Fine thread, series 2 | 1.5 | 1.5 | 2 |
| P — series 3 | / | / | 1.5 |
| d a — max | 15.1 | 17.3 | 19.5 |
| d a — min | 14 | 16 | 18 |
| d w — min | 19.6 | 22.5 | 24.9 |
| e — min | 23.35 | 26.75 | 29.56 |
| x — max, series 1 | 4 | 4 | 5 |
| x — series 2 | 3 | 3 | 4 |
| x — series 3 | / | / | 3 |
| g — max, series 1 | 7.3 | 7.3 | 9.3 |
| g — series 2 | 5.6 | 5.6 | 7.3 |
| g — series 3 | - | - | 5.6 |
| h — max=nominal size | 18 | 20 | 22 |
| h — min | 17.57 | 19.48 | 21.48 |
| r — ≈ | 28 | 30 | 32 |
| s — max=nominal size | 21 | 24 | 27 |
| s — min | 20.67 | 23.67 | 26.16 |
| t — max | 15.35 | 17.35 | 19.42 |
| t — min | 14.65 | 16.65 | 18.58 |
| w — min | 2 | 2 | 2 |
| per 1000 units ≈ kg | 35 | 46.5 | 70 |
| Attribute | M20 | (M22) | M24 |
|---|---|---|---|
| P — Coarse thread, series 1 | 2.5 | 2.5 | 3 |
| P — Fine thread, series 2 | 2 | 2 | 2 |
| P — series 3 | 1.5 | 1.5 | / |
| d a — max | 21.6 | 23.7 | 25.9 |
| d a — min | 20 | 22 | 24 |
| d w — min | 27.7 | 31.4 | 33.3 |
| e — min | 32.95 | 37.29 | 39.55 |
| x — max, series 1 | 5 | 5 | 6 |
| x — series 2 | 4 | 4 | 4 |
| x — series 3 | 3 | 3 | / |
| g — max, series 1 | 9.3 | 9.3 | 10.7 |
| g — series 2 | 7.3 | 7.3 | 7.3 |
| g — series 3 | 5.6 | 5.6 | - |
| h — max=nominal size | 25 | 28 | 30 |
| h — min | 24.48 | 27.48 | 29.48 |
| r — ≈ | 35 | 35 | 40 |
| s — max=nominal size | 30 | 34 | 36 |
| s — min | 29.16 | 33 | 35 |
| t — max | 21.42 | 22.42 | 24.42 |
| t — min | 20.58 | 21.58 | 23.58 |
| w — min | 2.5 | 3 | 3 |
| per 1000 units ≈ kg | 94 | 119 | 157 |
| Attribute | (M27) | M30 | M36 |
|---|---|---|---|
| P — Coarse thread, series 1 | 3 | 3.5 | 4 |
| P — Fine thread, series 2 | 2 | 2 | 3 |
| P — series 3 | / | / | / |
| d a — max | 29.1 | 32.4 | 38.9 |
| d a — min | 27 | 30 | 36 |
| d w — min | 38 | 42.8 | 51.1 |
| e — min | 45.2 | 50.85 | 60.79 |
| x — max, series 1 | 6 | 7 | 8 |
| x — series 2 | 4 | 4 | 6 |
| x — series 3 | / | / | / |
| g — max, series 1 | 10.7 | 12.7 | 14 |
| g — series 2 | 7.3 | 7.3 | 10.7 |
| g — series 3 | - | - | - |
| h — max=nominal size | 32 | 34 | 44 |
| h — min | 31.38 | 33.38 | 43.38 |
| r — ≈ | 50 | 60 | 70 |
| s — max=nominal size | 41 | 46 | 55 |
| s — min | 40 | 45 | 53.8 |
| t — max | 26.42 | 28.42 | 36.5 |
| t — min | 25.58 | 27.58 | 35.5 |
| w — min | 3 | 3 | 4 |
| per 1000 units ≈ kg | 229 | 310 | 577 |
| Attribute | M42 | M48 | (M56) |
|---|---|---|---|
| P — Coarse thread, series 1 | 4.5 | 5 | 5.5 |
| P — Fine thread, series 2 | 3 | 3 | 4 |
| P — series 3 | / | / | / |
| d a — max | 45.4 | 51.8 | 61 |
| d a — min | 42 | 48 | 56 |
| d w — min | 60 | 69.5 | 78.7 |
| e — min | 72.02 | 82.6 | 93.56 |
| x — max, series 1 | 9 | 10 | 11 |
| x — series 2 | 6 | 6 | 8 |
| x — series 3 | / | / | / |
| g — max, series 1 | 16 | 18.5 | 20 |
| g — series 2 | 10.7 | 10.7 | 14 |
| g — series 3 | / | / | / |
| h — max=nominal size | 52 | 58 | 68 |
| h — min | 51.26 | 57.26 | 67.26 |
| r — ≈ | 80 | 90 | 110 |
| s — max=nominal size | 65 | 75 | 85 |
| s — min | 63.1 | 73.1 | 82.8 |
| t — max | 42.5 | 48.5 | 56.6 |
| t — min | 41.5 | 47.5 | 55.4 |
| w — min | 4 | 4 | 5 |
| per 1000 units ≈ kg | 958 | 1410 | 2100 |
| Attribute | (M64) | (M72) |
|---|---|---|
| P — Coarse thread, series 1 | 6 | / |
| P — Fine thread, series 2 | 4 | 4 |
| P — series 3 | / | / |
| d a — max | 69.1 | 77.8 |
| d a — min | 64 | 72 |
| d w — min | 88.2 | 97.7 |
| e — min | 104.86 | 116.16 |
| x — max, series 1 | 12 | 12 |
| x — series 2 | 8 | 8 |
| x — series 3 | / | / |
| g — max, series 1 | 21 | 21 |
| g — series 2 | 14 | 14 |
| g — series 3 | / | / |
| h — max=nominal size | 75 | 85 |
| h — min | 74.26 | 84.13 |
| r — ≈ | 130 | 130 |
| s — max=nominal size | 95 | 105 |
| s — min | 92.8 | 102.8 |
| t — max | 62.6 | 67.6 |
| t — min | 61.4 | 66.4 |
| w — min | 5 | 5 |
| per 1000 units ≈ kg | 2840 | 3910 |
Materials
- Material and property class specified per RFQ — confirm against the stud strength at quotation
Ordering & documentation
Documents
Shipments of DIN 917 Hex Cap Nuts — Low Type are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 917 Hex Cap Nuts — Low Type orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 917 Hex Cap Nuts — Low Type), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for DIN 917 Hex Cap Nuts — Low Type: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for din 917 hex cap nuts — low type is 10,000 pieces (applies to the standard sizes and finishes for din 917 hex cap nuts — low type; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 917 hex cap nuts — low type run 3–7 days. Quantities or variants of din 917 hex cap nuts — low type outside the standard range are confirmed at quotation.
Storage & shipping
DIN 917 Hex Cap Nuts — Low Type are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 917 hex cap nuts — low type dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
What should I check before substituting a cap nut for a plain hex nut?
Three things, all readable from the collected tables. Height: the low-type dome still adds height over a plain nut — compare the h column against the clearance you have (25 mm at M20, 44 mm at M36). Strength: a cap nut's dome is hollow, so the nut cannot be torqued like a solid nut of the same class — the cap deforms if wrenched on the dome, and the standard's proof loads for cap nuts run lower than the equivalent plain nut; size the property class at RFQ against the stud, and torque on the hex only. Thread series: the source's series 1/2/3 rows show which coarse and fine pitches each size takes — read the "/" cells as "this series does not cover the size" and order by the series your stud actually is. The dome covers the thread end, so also confirm the stud projection: too long bottoms the stud in the cap and holds the dome off the hex, defeating the seal and the look.
What is the MOQ and lead time for this nut type?
The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common sizes in this nut type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.
What is the MOQ and lead time for DIN 917 Hex Cap Nuts — Low Type?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for DIN 917 Hex Cap Nuts — Low Type state?
State the full designation (DIN 917), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 917 Hex Cap Nuts — Low Type inquiry
- ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
- ✓ State the nut property class or material and the bolt class/material it must be paired with.
- ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
- ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
- ✓ Factory-direct pricing for your DIN 917 Hex Cap Nuts — Low Type
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support