DIN 979 Hex Thin Slotted and Castle Nuts
DIN 979 hexagon thin slotted and castle nuts, M6 to M52 — the low-profile slotted nut for jamming and cotter-pin locking on threaded rods and shafts, with the collected per-size tables: pitches, d e, e, k, w, n and s.
Last updated: 2026-11
Specifications
DIN 979 is the thin cousin of the DIN 935 castle and slotted nut family: a hex nut of reduced height k whose upper portion carries a slot (or full castle slots) that takes a split cotter pin through the mating bolt, and whose thin body is what you reach for when stack height is tight or when the nut works as a jam counter-nut against a primary nut. Two uses dominate. As a cotter lock: drill the cotter through the slots and the pin — not friction — stops rotation, which is why slotted nuts survive on linkages, yokes and steering geometry where a loose nut is a safety event. As a jam nut: run the DIN 979 up hard against a working nut and the counter-facing threads wedge the pair. The collected tables run M6 to M52 with coarse plus fine-pitch pitch rows, countersink d e (printed "-" for the M6-M10 sizes — a source quirk kept verbatim), across-corners e, height k, thickness below the slot w, slot width n and across-flats s. Materials, property classes and finishes are not printed by the collected specification and stay per RFQ.
| Standard | DIN 979 — hexagon thin slotted and castle nuts (thin series of the DIN 935 family) |
|---|---|
| Series | M6 – M52 (seven source column groups; parenthesized sizes are the non-preferred series as printed) |
| Tabulated geometry | Per size: pitch (coarse + two fine rows as printed), d e (max/min, "-" at M6-M10 as printed), e (min, 11.05–88.25 mm), k (max/min, 5–38 mm), w (max/min), slot width n (max/min, 2–9.36 mm), s (max=nominal/min, 10–80 mm) |
| Function | Cotter-pin lock through the slots, or a thin jam/counter-nut where stack height is tight |
| Materials / finishes | Not tabulated by the collected specification — per RFQ |
| Attribute | M6 | (M7) | M8 |
|---|---|---|---|
| P — Pitch (Coarse thread) | 1 | 1 | 1.25 |
| Fine thread | - | - | 1 |
| Fine thread | - | - | - |
| d e — max | - | - | - |
| min | - | - | - |
| e — min | 11.05 | 12.12 | 14.38 |
| k — max=nominal size | 5 | 5.5 | 6.5 |
| min | 4.7 | 5.2 | 6.14 |
| w — max | 2.5 | 3 | 3.5 |
| min | 2.25 | 2.75 | 3.2 |
| n — max | 2.25 | 2.25 | 2.75 |
| min | 2 | 2 | 2.5 |
| s — max=nominal size | 10 | 11 | 13 |
| min | 9.78 | 10.73 | 12.73 |
| Attribute | M10 | M12 | (M14) |
|---|---|---|---|
| P — Pitch (Coarse thread) | 1.5 | 1.75 | 2 |
| Fine thread | 1 | 1.5 | 1.5 |
| Fine thread | 1.25 | 1.25 | - |
| d e — max | - | 16 | 18 |
| min | - | 15.57 | 17.57 |
| e — min | 17.77 | 20.03 | 23.35 |
| k — max=nominal size | 8 | 10 | 11 |
| min | 7.64 | 9.64 | 10.57 |
| w — max | 4 | 5 | 6 |
| min | 3.7 | 4.7 | 5.7 |
| n — max | 3.05 | 3.8 | 3.8 |
| min | 2.8 | 3.5 | 3.5 |
| s — max=nominal size | 16 | 18 | 21 |
| min | 15.73 | 17.73 | 20.67 |
| Attribute | M16 | (M18) | M20 |
|---|---|---|---|
| P — Pitch (Coarse thread) | 2 | 2.5 | 2.5 |
| Fine thread | 1.5 | 1.5 | 2 |
| Fine thread | - | 2 | 1.5 |
| d e — max | 22 | 25 | 28 |
| min | 21.48 | 24.3 | 27.3 |
| e — min | 26.75 | 29.56 | 32.95 |
| k — max=nominal size | 13 | 15 | 16 |
| min | 12.57 | 14.3 | 15.3 |
| w — max | 7 | 9 | 10 |
| min | 6.64 | 8.64 | 9.64 |
| n — max | 4.8 | 4.8 | 4.8 |
| min | 4.5 | 4.5 | 4.5 |
| s — max=nominal size | 24 | 27 | 30 |
| min | 23.67 | 26.16 | 29.16 |
| Attribute | (M22) | M24 | (M27) |
|---|---|---|---|
| P — Pitch (Coarse thread) | 2.5 | 3 | 3 |
| Fine thread | 1.5 | 2 | 2 |
| Fine thread | 2 | - | - |
| d e — max | 32 | 34 | 38 |
| min | 31 | 33 | 37 |
| e — min | 37.29 | 39.55 | 45.2 |
| k — max=nominal size | 18 | 19 | 22 |
| min | 17.3 | 18.16 | 21.16 |
| w — max | 10 | 11 | 14 |
| min | 9.64 | 10.57 | 13.57 |
| n — max | 5.8 | 5.8 | 5.8 |
| min | 5.5 | 5.5 | 5.5 |
| s — max=nominal size | 34 | 36 | 41 |
| min | 33 | 35 | 40 |
| Attribute | M30 | (M33) | M36 |
|---|---|---|---|
| P — Pitch (Coarse thread) | 3.5 | 3.5 | 4 |
| Fine thread | 2 | 2 | 3 |
| Fine thread | - | - | - |
| d e — max | 42 | 46 | 50 |
| min | 41 | 45 | 49 |
| e — min | 50.85 | 55.37 | 60.79 |
| k — max=nominal size | 24 | 26 | 29 |
| min | 23.16 | 25.16 | 28.16 |
| w — max | 15 | 17 | 20 |
| min | 14.57 | 16.57 | 19.48 |
| n — max | 7.36 | 7.36 | 7.36 |
| min | 7 | 7 | 7 |
| s — max=nominal size | 46 | 50 | 55 |
| min | 45 | 49 | 53.8 |
| Attribute | (M39) | M42 | (M45) |
|---|---|---|---|
| P — Pitch (Coarse thread) | 4 | 4.5 | 4.5 |
| Fine thread | 3 | 3 | 3 |
| Fine thread | - | - | - |
| d e — max | 55 | 58 | 62 |
| min | 53.8 | 56.8 | 60.8 |
| e — min | 66.44 | 71.3 | 76.95 |
| k — max=nominal size | 31 | 33 | 34.5 |
| min | 30 | 32 | 33.5 |
| w — max | 22 | 22 | 22.5 |
| min | 21.48 | 21.48 | 22.02 |
| n — max | 7.36 | 9.36 | 9.36 |
| min | 7 | 9 | 9 |
| s — max=nominal size | 60 | 65 | 70 |
| min | 58.8 | 63.1 | 68.1 |
| Attribute | M48 | (M52) |
|---|---|---|
| P — Pitch (Coarse thread) | 5 | 5 |
| Fine thread | 3 | 3 |
| Fine thread | - | - |
| d e — max | 65 | 70 |
| min | 63.8 | 68.8 |
| e — min | 82.6 | 88.25 |
| k — max=nominal size | 36 | 38 |
| min | 35 | 37 |
| w — max | 24 | 26 |
| min | 23.48 | 25.48 |
| n — max | 9.36 | 9.36 |
| min | 9 | 9 |
| s — max=nominal size | 75 | 80 |
| min | 73.1 | 78.1 |
Materials
- Material and finish specified per RFQ — state the mating bolt and cotter-pin size at quotation
Ordering & documentation
Documents
Shipments of DIN 979 Hex Thin Slotted and Castle Nuts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 979 Hex Thin Slotted and Castle Nuts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 979 Hex Thin Slotted and Castle Nuts), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for DIN 979 Hex Thin Slotted and Castle Nuts: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for din 979 hex thin slotted and castle nuts is 10,000 pieces (applies to the standard sizes and finishes for din 979 hex thin slotted and castle nuts; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 979 hex thin slotted and castle nuts run 3–7 days. Quantities or variants of din 979 hex thin slotted and castle nuts outside the standard range are confirmed at quotation.
Storage & shipping
DIN 979 Hex Thin Slotted and Castle Nuts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 979 hex thin slotted and castle nuts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
DIN 979 or DIN 935 — which slotted nut for my assembly?
By height budget and by what the joint can carry. DIN 935 is the full-height castle nut: more engaged thread, more clamp, and the standard pick where the nut is the primary fastening. DIN 979 trades height for a thinner profile — the collected tables show k at roughly 60–70% of the DIN 935 value per size — so use it where the bolt cannot give up the stack height, where the nut jams against a primary nut rather than clamping a joint itself, or where a shorter bolt keeps the cotter hole inside the engaged thread. Whichever you pick, the cotter needs a clear path: check the slot width n column against your pin, and the hole in the bolt against the slot position, before you commit — a cotter that will not pass is a field rework. Mind the source quirk on d e (printed "-" at M6-M10) and confirm the countersink at RFQ if your housing uses one.
What is the MOQ and lead time for this nut type?
The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common sizes in this nut type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.
What is the MOQ and lead time for DIN 979 Hex Thin Slotted and Castle Nuts?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for DIN 979 Hex Thin Slotted and Castle Nuts state?
State the full designation (DIN 979), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 979 Hex Thin Slotted and Castle Nuts inquiry
- ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
- ✓ State the nut property class or material and the bolt class/material it must be paired with.
- ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
- ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
- ✓ Factory-direct pricing for your DIN 979 Hex Thin Slotted and Castle Nuts
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support