DIN 7967 Self-Locking Counter Nuts
DIN 7967 self-locking counter nuts (sheet counter-nuts), M4 to M52 — the thin pressed lock nut that spins onto a bolt and locks by its deformed thread, with the collected per-size tables: P, d, e, m, s (h13) and t across Series 1/2/3, plus source mass rows.
Last updated: 2026-11
Specifications
DIN 7967 is the sheet-metal counter nut: a very thin pressed hexagonal nut — height m of just 2.5 mm at M4 rising to 16 mm at M52 — with a thread formed from folded sheet that locks by elastic deformation of its own flanks. Spun onto the bolt after the primary nut or component, it acts as the counter-nut: the deformed flanks grip the thread elastically and the pair will not walk, without nylo (so higher temperature tolerance than an insert lock nut), without a washer and at almost no added stack height. Because it is pressed from sheet, the standard is built around three pitch/diameter series — the collected tables print P, d, the sheet class t and the mass rows split into Series 1/2/3 sub-rows, with "-" where a series does not cover the size — and the width across flats carries the h13 tolerance the source prints on the s row. This is a light-duty lock: the counter nut stabilises a joint that already carries its load through the primary thread, so do not ask it to clamp on its own. Materials (typically spring or mild steel sheet) and finishes are not printed by the collected specification and stay per RFQ.
| Standard | DIN 7967 — self-locking counter nuts (thin pressed sheet counter-nuts) |
|---|---|
| Series | M4 – M52 (seven source column groups; P / d / t / mass split into Series 1/2/3 sub-rows as printed, "-" where a series does not cover the size) |
| Tabulated geometry | Per size and series: pitch P, counter-nut diameter d, e across corners (≈, 8.1–92.4 mm), height m (2.5–16 mm), s across flats (max=nominal h13 / min, 7–80 mm), sheet class t (0.3–1.7 mm), source mass per 1000 units ≈ kg |
| Locking mechanism | Elastic deformation of the pressed thread flanks — all-metal prevailing torque, no insert, reusable within its light-duty envelope |
| Duty boundary | Counter-nut: stabilises an existing joint — not a primary clamp; materials and finishes per RFQ |
| Attribute | M4 | M5 | M6 |
|---|---|---|---|
| P — Series 1 | 0.7 | 0.8 | 1 |
| Series 2 | - | - | - |
| Series 3 | - | - | - |
| d — Series 1 | 3.5 | 4.5 | 5.3 |
| Series 2 | - | - | - |
| Series 3 | - | - | - |
| e — ≈ | 8.1 | 9.2 | 11.5 |
| m | 2.5 | 2.5 | 3 |
| s — max=nominal size (h13) | 7 | 8 | 10 |
| min | 6.78 | 7.78 | 9.78 |
| t — Series 1 | 0.3 | 0.4 | 0.4 |
| Series 2 | - | - | - |
| Series 3 | - | - | - |
| per 1000 units≈kg — Series 1 | 0.17 | 0.28 | 0.4 |
| Series 2 | - | - | - |
| Series 3 | - | - | - |
| Attribute | M8 | M10 | M12 |
|---|---|---|---|
| P — Series 1 | 1.25 | 1.5 | 1.75 |
| Series 2 | 1 | 1.25 | 1.5 |
| Series 3 | - | 1 | 1.25 |
| d — Series 1 | 6.9 | 8.6 | 10.4 |
| Series 2 | 7.1 | 9 | 10.7 |
| Series 3 | - | 9.3 | 11 |
| e — ≈ | 15 | 19.6 | 21.9 |
| m | 3.5 | 4 | 4.5 |
| s — max=nominal size (h13) | 13 | 17 | 19 |
| min | 12.73 | 16.73 | 18.67 |
| t — Series 1 | 0.5 | 0.5 | 0.6 |
| Series 2 | 0.4 | 0.5 | 0.6 |
| Series 3 | - | 0.5 | 0.6 |
| per 1000 units≈kg — Series 1 | 0.9 | 1.4 | 1.9 |
| Series 2 | 0.7 | 1.4 | 1.9 |
| Series 3 | - | 1.4 | 1.9 |
| Attribute | M14 | M16 | M18 |
|---|---|---|---|
| P — Series 1 | 2 | 2 | 2.5 |
| Series 2 | 1.5 | 1.5 | 2 |
| Series 3 | - | - | 1.5 |
| d — Series 1 | 12 | 14.1 | 15.5 |
| Series 2 | 12.7 | 14.8 | 16.2 |
| Series 3 | - | - | 16.8 |
| e — ≈ | 25.4 | 27.7 | 31.2 |
| m | 5 | 5 | 5.5 |
| s — max=nominal size (h13) | 22 | 24 | 27 |
| min | 21.67 | 23.67 | 26.67 |
| t — Series 1 | 0.6 | 0.7 | 0.7 |
| Series 2 | 0.6 | 0.7 | 0.7 |
| Series 3 | - | - | 0.7 |
| per 1000 units≈kg — Series 1 | 2.5 | 3.4 | 4.1 |
| Series 2 | 2.5 | 3.4 | 4.1 |
| Series 3 | - | - | 4.1 |
| Attribute | M20 | M22 | M24 |
|---|---|---|---|
| P — Series 1 | 2.5 | 2.5 | 3 |
| Series 2 | 2 | 2 | 2 |
| Series 3 | 1.5 | 1.5 | 1.5 |
| d — Series 1 | 17.6 | 19.6 | 21 |
| Series 2 | 18.3 | 20.3 | 22.5 |
| Series 3 | 18.8 | 20.8 | 22.8 |
| e — ≈ | 34.6 | 36.9 | 41.6 |
| m | 6 | 6 | 7 |
| s — max=nominal size (h13) | 30 | 32 | 36 |
| min | 29.67 | 31.61 | 35.61 |
| t — Series 1 | 0.8 | 0.8 | 0.9 |
| Series 2 | 0.8 | 0.8 | 0.9 |
| Series 3 | 0.7 | 0.7 | 0.7 |
| per 1000 units≈kg — Series 1 | 5.8 | 6.4 | 9.5 |
| Series 2 | 5.8 | 6.4 | 9.5 |
| Series 3 | 5.1 | 5.6 | 7.4 |
| Attribute | M27 | M30 | M33 |
|---|---|---|---|
| P — Series 1 | 3 | 3.5 | 3.5 |
| Series 2 | 2 | 2 | 2 |
| Series 3 | - | - | - |
| d — Series 1 | 24.2 | 26.6 | 29.8 |
| Series 2 | 25.5 | 28.5 | 31.5 |
| Series 3 | - | - | - |
| e — ≈ | 47.3 | 53.1 | 57.7 |
| m | 7 | 8 | 8 |
| s — max=nominal size (h13) | 41 | 46 | 50 |
| min | 40.61 | 45.61 | 49.61 |
| t — Series 1 | 1 | 1.1 | 1.2 |
| Series 2 | 1 | 1 | 1 |
| Series 3 | - | - | - |
| per 1000 units≈kg — Series 1 | 13 | 17.5 | 22 |
| Series 2 | 13 | 16 | 18.5 |
| Series 3 | - | - | - |
| Attribute | M36 | M39 | M42 |
|---|---|---|---|
| P — Series 1 | 4 | 4 | 4.5 |
| Series 2 | 3 | 3 | 3 |
| Series 3 | - | - | - |
| d — Series 1 | 32.2 | 35.2 | 37.6 |
| Series 2 | 33.6 | 36.6 | 39.8 |
| Series 3 | - | - | - |
| e — ≈ | 63.5 | 69.3 | 75 |
| m | 9 | 9 | 11 |
| s — max=nominal size (h13) | 55 | 60 | 65 |
| min | 54.54 | 59.54 | 64.54 |
| t — Series 1 | 1.3 | 1.3 | 1.4 |
| Series 2 | 1.3 | 1.3 | 1.4 |
| Series 3 | - | - | - |
| per 1000 units≈kg — Series 1 | 29 | 32 | 45 |
| Series 2 | 29 | 32 | 45 |
| Series 3 | - | - | - |
| Attribute | M45 | M48 | M52 |
|---|---|---|---|
| P — Series 1 | 4.5 | 5 | 5 |
| Series 2 | 3 | 3 | 3 |
| Series 3 | - | - | - |
| d — Series 1 | 40.9 | 43.9 | 48.2 |
| Series 2 | 42.8 | 45.8 | 49.8 |
| Series 3 | - | - | - |
| e — ≈ | 80.8 | 86.5 | 92.4 |
| m | 12 | 14 | 16 |
| s — max=nominal size (h13) | 70 | 75 | 80 |
| min | 69.54 | 74.54 | 79.54 |
| t — Series 1 | 1.5 | 1.6 | 1.7 |
| Series 2 | 1.5 | 1.5 | 1.5 |
| Series 3 | - | - | - |
| per 1000 units≈kg — Series 1 | 64 | 80 | 95 |
| Series 2 | 64 | 75 | 80 |
| Series 3 | - | - | - |
Materials
- Sheet material and finish specified per RFQ — confirm the host thread and duty temperature at quotation
Ordering & documentation
Documents
Shipments of DIN 7967 Self-Locking Counter Nuts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 7967 Self-Locking Counter Nuts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 7967 Self-Locking Counter Nuts), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for DIN 7967 Self-Locking Counter Nuts: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for din 7967 self-locking counter nuts is 10,000 pieces (applies to the standard sizes and finishes for din 7967 self-locking counter nuts; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 7967 self-locking counter nuts run 3–7 days. Quantities or variants of din 7967 self-locking counter nuts outside the standard range are confirmed at quotation.
Storage & shipping
DIN 7967 Self-Locking Counter Nuts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 7967 self-locking counter nuts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
Can a DIN 7967 counter nut replace a nylon-insert lock nut?
Only inside its light-duty envelope — and it earns its place on two counts. Count one: temperature. The lock is elastic deformation of the pressed sheet thread, not a nylon collar, so where a nyloc loses grip near the insert's ceiling the DIN 7967 keeps locking; the collected tables carry no temperature limit, so confirm the sheet grade at RFQ for hot duty. Count two: stack. At 2.5 mm height (M4) to 16 mm (M52) it adds almost nothing to the thread run, which matters on long adjustment threads and fine-pitch rods. But the load path is the limit: the counter nut's clamp contribution is small — it is there to stop relative rotation, not to carry preload — so on a primary structural joint use a proper lock nut (DIN 982/980) and keep the DIN 7967 for counter-nut duty on rods, adjusters and light assemblies. Read the Series 1/2/3 rows in the collected table against the pitch you need: the series, not just the size, defines the part.
What is the MOQ and lead time for this nut type?
The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common sizes in this nut type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.
What is the MOQ and lead time for DIN 7967 Self-Locking Counter Nuts?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for DIN 7967 Self-Locking Counter Nuts state?
State the full designation (DIN 7967), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 7967 Self-Locking Counter Nuts inquiry
- ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
- ✓ State the nut property class or material and the bolt class/material it must be paired with.
- ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
- ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
- ✓ Factory-direct pricing for your DIN 7967 Self-Locking Counter Nuts
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support