DIN 314 Wing Nuts, Edged Wings (American Form)

DIN 314 wing nuts with edged wings, American form, M4 to M12: toleranced wing and nut geometry, plus UNI 5448 and market-common reference tables to M22.

Last updated: 2026-11

Request a Quote

DIN 314 Wing Nuts, Edged Wings (American Form) in an industrial setting
Illustrative image redrawn from real DIN 314 Wing Nuts, Edged Wings (American Form) product references — not a photograph of stocked items.

Specifications

DIN 314 is the American-form wing nut with edged (flat-faced) wings — the shape that takes real hand torque without slipping. The collected 09/1999-edition table runs M4 to M12 fully toleranced: wing span e max/min, wing height h max/min, wing gap g min, nut height m max/min and the bore D1 max/min (D1 min 7 at M4 to 21 at M12), so the fit of both the thread and the wing clearances is controlled. Two reference tables sit beside it on the source page: UNI 5448:1971 (M3 to M16, approximate values with mass per 1000 pcs, 1.7 at M3-class to 60 at M16) and a market-common American-form ladder out to M22 — both carried verbatim, because maintenance work regularly meets wing nuts stamped to neither DIN nor ISO. Hand-adjustable fixtures, formwork, hose and cable clamps are the duty.

Standard / scope DIN 314 wing nuts, edged wings, American form — M4 to M12, edition 09/1999 (fully toleranced)
Wing geometry e max/min (span), h max/min (wing height), g min (gap) per size — the hand-engagement dimensions
Nut geometry m max/min (height) and bore D1 max/min: D1 min 7 (M4) to 21 (M12)
Reference tables UNI 5448:1971 M3–M16 approximate values + mass (kg/1000, ρ=7,85 kg/dm³); market-common American-form values M3–M22 — verbatim, beside the DIN table
Not tabulated Material, finish, strength — per RFQ
DIN 314 wing nuts (American form, edged wings) — 09/1999 edition, wing and nut geometry by thread DDimensions in mm unless stated; cell values, symbols and decimal marks exactly as printed on the source page. Column 1 is the row label.
D Thread sizeM 4M 5M 6M 8M 10M 12
Pitch0.70.811.251.51.75
e max2126.532385066
e min1924.529354763
h max111316192432
h min91114172229
g min2.52.633.345
m max4.6678.51013
m min3.2456.5810
D1 max91214162124
D1 min7911131821
  • Source spanning title row carried verbatim: "Dimensions in mm - source DIN 314 (~ American Form)".
  • Edition row carried from the source grid: "Publication date: 09/1999".
UNI 5448:1971 (American form) — wing nut geometry by thread DDimensions in mm unless stated; cell values, symbols and decimal marks exactly as printed on the source page. Column 1 is the row label.
D Thread sizeM 3M 4M 5M 6M 8M 10M 12M 14M 16
e17.617.622.527.830.336.249.458.358.3
h8.68.61113.614.817.724.128.528.5
g1.61.62.12.52.83.34.55.25.2
m3.23.24.15.15.66.8910.710.7
D18810.312.713.816.522.526.626.6
Approximate weigth, in kg x1000 pcs, (ρ=7,85 kg/dm3)1.71.643.466.45813.534.76057
  • Source spanning title row carried verbatim: "Dimensions in mm - source UNI 5448 1971 (~American Form)".
Wing nuts, American form — market-common geometry by thread DDimensions in mm unless stated; cell values, symbols and decimal marks exactly as printed on the source page. Column 1 is the row label.
D Thread sizeM 3M 4M 5M 6M 8M 10M 12M 14M 16M18M 20M 22
D17.87.89.511.913.515.320.5252529.329.333.5
e18182226.830.335.347.5656566.566.580
h8.88.810.512.914.817.322.330.830.831.231.240
g222.633.3456.56.57.27.28.2
m3344.95.46.37.910.610.612.212.215
  • Source spanning title row carried verbatim: "Dimensions in mm - Wing nuts American Form generally used".

Materials

  • Wing nuts order in malleable iron and cast steel for the clamping duty, stamped steel for light duty, brass and stainless for corrosive or decorative work. Wing geometry is where quality differs: cast wings keep the edged face true under high hand torque, stamped wings deform. State thread and finish, and if the nut will see repeated heavy hand-tightening say so — it changes what we quote

Ordering & documentation

Documents

Shipments of DIN 314 Wing Nuts, Edged Wings (American Form) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 314 Wing Nuts, Edged Wings (American Form) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 314 Wing Nuts, Edged Wings (American Form)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for DIN 314 Wing Nuts, Edged Wings (American Form): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for din 314 wing nuts, edged wings (american form) is 10,000 pieces (applies to the standard sizes and finishes for din 314 wing nuts, edged wings (american form); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 314 wing nuts, edged wings (american form) run 3–7 days. Quantities or variants of din 314 wing nuts, edged wings (american form) outside the standard range are confirmed at quotation.

Storage & shipping

DIN 314 Wing Nuts, Edged Wings (American Form) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 314 wing nuts, edged wings (american form) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

DIN 315, DIN 314 — which wing nut does my application take?

The registered DIN 315 page carries the standard rounded-wing (butterfly) wing nut; DIN 314 here is the American form with edged wings. The edge converts finger pressure into torque — where a rounded wing slips, the flat face grips, so 314 owns the high-reuse clamping jobs (fixtures, formwork, adjustment hardware) and 315 the quick quarter-turn jobs (hoses, covers, battery terminals). Their dimensions are close but not identical, and the DIN 314 page is the only one carrying full min/max tolerance plus the UNI/market reference tables — relevant if you are auditing old hardware whose stamps do not match the drawing.

Why does the page carry UNI and "market-common" tables beside the DIN values?

Because wing nuts are one of the categories where legacy and trade hardware circulates in three geometries at once: the DIN 314 values (toleranced), the Italian UNI 5448:1971 values (approximate, one size range wider) and the de-facto trade American-form values (widest range, out to M22). The collected source printed all three, and the page keeps all three verbatim — that is the practical audit path when a stamped part must be identified from its measurements. For new orders the DIN table governs; for replacement of unidentified hardware, measure e/h/g and read across the three tables, then send the measurements with the RFQ and we match the form.

What is the MOQ and lead time for DIN 314 Wing Nuts, Edged Wings (American Form)?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for DIN 314 Wing Nuts, Edged Wings (American Form) state?

State the full designation (DIN 314 Wing Nuts, Edged Wings (American Form)), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 314 Wing Nuts, Edged Wings (American Form) inquiry

  • ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
  • ✓ State the nut property class or material and the bolt class/material it must be paired with.
  • ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
  • ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
  • ✓ Factory-direct pricing for your DIN 314 Wing Nuts, Edged Wings (American Form)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.