DIN 985 Nylon-Insert Lock Nuts

Nylon-insert prevailing-torque lock nuts per DIN 985 — a nylon collar grips the bolt threads and resists back-off, good to roughly 250°F (≈120°C), reusable a few times. The everyday lock nut for general assembly and moderate vibration.

Last updated: 2026-11

Request a Quote

DIN 985 Nylon-Insert Lock Nuts in an industrial setting
Illustrative image redrawn from real DIN 985 Nylon-Insert Lock Nuts product references — not a photograph of stocked items.

Specifications

The nyloc is the everyday lock nut: a nylon collar molded into the top of the nut deforms around the bolt threads, creating friction that resists back-off without galling the thread or marring the bearing surface. It is inexpensive, effective against moderate vibration, and needs no special installation practice — torque it like a standard hex nut. Its limit is temperature: above roughly 250°F (≈120°C) the nylon softens and the locking action degrades, so it does not belong on engines, exhaust systems or other hot spots — those call for an all-metal prevailing-torque nut such as DIN 980.

Standard DIN 985 — hex lock nut, nylon insert (non-metallic prevailing torque)
Locking mechanism Nylon collar deforms around the bolt threads and grips by friction
Temperature limit About 250°F (≈120°C) — above it the nylon softens and the lock degrades
Reuse Reusable a few times before the nylon insert wears out
Typical applications General assembly and moderate-vibration joints; not for engines, exhaust or other hot spots
ISO 10511 hexagon thin nuts with non-metallic insert (DIN 985 pairing) — per-size ladder, M3–M48 (mm)All dimensions in millimetres, comma decimal separators preserved as printed. ISO 10511 is the ISO pairing this page's DIN 985 designation is quoted against (thin-style nylon-insert lock nuts). The ladder is published as two column-per-size tables (M3–M18, M20–M48); merged here to one row per size. P = thread pitch; da = countersink diameter (min/max); dw = bearing-face diameter (min); e = width across corners (min); h = nut height (nominal = max, and min); m = effective thread/prevailing-torque check height (min); m' = wrenching height (min); s = width across flats (nominal = max, and min). The "also threaded" column lists the fine-pitch companion designations printed per size — one dimension set shared by the coarse and fine threads of a size. A site-calculated weight row (7.85 kg/dm³) is excluded as a publisher addition, not standard content (see anomaly note). The M24 and M27 rows complete the size run between the two published table blocks.
Thread (d)Pda minda maxdw mine minh nominal = maxh minm minm' mins nominal = maxs minAlso threaded (per source)
M30,533,454,66,0143,72,41,655,55,32-
M40,744,65,97,6654,72,92,276,78-
M50,855,756,98,7954,73,22,7587,78-
M6166,758,911,0565,743,3109,78-
M7177,759,612,127,57,144,73,851110,73-
M81,2588,7511,614,3887,645,54,41312,73M8x1
M101,51010,815,618,9109,646,55,51716,73M10x1 / M10x1,25
M121,75121317,421,11211,5786,61918,67M12x1,5 / M12x1,25
M1421415,120,524,491413,39,57,72221,67M14x1,5
M1621617,322,526,751615,310,58,82423,67M16x1,5
M182,51819,524,929,5618,517,66139,92726,16M18x2 / M18x1,5
M202,52021,627,732,952018,714113029,16M20x2 / M20x1,5
M222,52223,729,535,032220,71512,23231M22x2 / M22x1,5
M2432425,933,239,552422,71513,23635M24x2
M2732729,13845,22725,71714,84140M27x2
M303,53032,442,750,853028,71916,54645M30x2
M333,53335,646,655,373331,42218,25046M33x2
M3643638,951,160,793634,42519,85553,8M36x3
M3943942,155,966,443937,42721,56058,8M39x3
M424,54245,460,672,094240,42923,16563,8M42x3
M454,54548,664,776,954543,43224,87068,1M45x3
M4854851,869,482,64846,43626,57573,1M48x3
  • Row 12 (M20): The source splits the ladder at M20 into a second table — merged here with no value changes. The site-added weight row (kg/1000 pcs at 7.85 kg/dm³) is a calculated site column, not part of the standard, and is excluded from this table.
  • Row 16 (M30): The source prints the M33 s min as 46 — against the max of 50 and the neighbouring ladder (M30: 45/46, M36: 53,8) — reproduced verbatim; treat with care (a 50-max nut with a 46-min flat envelope leaves no manufacturing band). Verify against ISO 10511 before quoting M33.
  • Row 1 (M3): Prevailing-torque performance, property classes and finishes are not tabulated by the source — per RFQ. M24 and M27 fill the gap registered when the earlier amesweb capture stopped short of them.

Materials

  • Steel
  • Stainless steel
  • Brass

DIN 985 is the low-profile nylon-insert lock nut, and the insert material — not the steel body — sets its limits: standard polyamide 6/6.6 retains its elastic grip only from about -40 to +120 C in service, and the failure is soft — above the ceiling the nut simply becomes a regular hex nut with a useless plastic ring, with no visible warning.

Two disciplines follow: reuse — manufacturers recommend single-use because the nylon deforms on first install and locking force drops after the first removal — and the stainless split, A2-70 (about 700 MPa tensile, general outdoor away from salt) versus A4-70 (molybdenum-added, marine/coastal/food-brine/chemical). On stainless body pairs, apply anti-seize to the bolt thread: the metal portion can gall even though the nylon insert does not need lubrication.

Ordering & documentation

Documents

Shipments of DIN 985 Nylon-Insert Lock Nuts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 985 Nylon-Insert Lock Nuts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 985 Nylon-Insert Lock Nuts), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for DIN 985 Nylon-Insert Lock Nuts: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for din 985 nylon-insert lock nuts is 10,000 pieces (applies to the standard sizes and finishes for din 985 nylon-insert lock nuts; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 985 nylon-insert lock nuts run 3–7 days. Quantities or variants of din 985 nylon-insert lock nuts outside the standard range are confirmed at quotation.

Storage & shipping

DIN 985 Nylon-Insert Lock Nuts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 985 nylon-insert lock nuts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

How many times can a nylon-insert lock nut be reused?

A few times. Each installation compresses the nylon collar further, and the grip fades as the insert wears — a nyloc that has been on and off several times no longer delivers its original prevailing torque. For joints that are serviced frequently, or for any high-temperature location, an all-metal lock nut (DIN 980) is the specification that keeps its lock over more cycles.

What is the MOQ and lead time for this nut type?

The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common diameters in this nut type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

What should an RFQ for this nut type state?

State the standard designation (for example DIN 985 or DIN 6923), nominal thread size and pitch (metric coarse unless fine pitch is required), material and strength pairing with the mating bolt, finish (plain, zinc, or hot-dip galvanized where compatible), required certificates such as a mill test report per EN 10204 3.1, and quantity per size — plus destination country.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 985 Nylon-Insert Lock Nuts inquiry

  • ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
  • ✓ State the nut property class or material and the bolt class/material it must be paired with.
  • ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
  • ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
  • ✓ Factory-direct pricing for your DIN 985 Nylon-Insert Lock Nuts
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.