ISO 4032 Hex Regular Nuts (Style 1)
ISO 4032 hex regular nuts, style 1 — the standard-height metric hex nut, M1.6 to M60 — with the full collected 29-size table: pitch, countersink and bearing-face diameters, nut height, effective bearing height, and across-flats tolerances.
Last updated: 2026-11
Specifications
ISO 4032 is the reference metric hex nut: nominal (style 1) height of roughly 0.8–0.9 × thread diameter, chamfered bearing faces, and the across-flats series shared with the hex bolts it pairs with (ISO 4014/4017). The m w row in the table — effective bearing height — is the load-bearing figure: it is the thread engagement a mating bolt can count on, and it is what separates a style 1 nut from the thin ISO 4035, whose reduced height trades engagement for clearance and thread run-up. The collected table runs M1.6 to M60, with sizes above M39 printed in parentheses by the source (the less-common upper ladder). Pairing discipline follows the bolt: strength class matching between nut and bolt protects the bolt from nut-thread stripping — the grade-pairing guidance on this site covers the combinations. Property class and finish are not part of the collected table and follow the drawing callout; for the lock-nut variants see the DIN 985 nyloc and DIN 980 Stover pages.
| Standard | ISO 4032 — hexagon regular nuts (style 1), chamfered |
|---|---|
| Series | M1.6 – M60 (29 sizes tabulated; sizes above M39 printed in parentheses in the source) |
| Tabulated geometry | Per size: pitch P, chamfer c, countersink d a, bearing face d w, across-corners e, nut height m (max/min), effective bearing height m w, across-flats s (max/min) |
| Nut form | Style 1 — nominal height, double-chamfered bearing faces |
| Family note | Standard-height counterpart of ISO 4035 thin nuts; pairs with ISO 4014/4017 hex bolts; lock variants DIN 985 / DIN 980 |
| Materials / strength | Not tabulated by the collected specification — per RFQ (property class and finish per drawing callout) |
| Nominal thread | P — Pitch | c — max | c — min | d a — max | d a — min | d w — min | e — min | m — max | m — min | m w — min | s — max=nominal size | s — min |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M1.6 | 0.35 | 0.2 | 0.1 | 1.84 | 1.6 | 2.4 | 3.41 | 1.3 | 1.05 | 0.8 | 3.2 | 3.02 |
| M2 | 0.4 | 0.2 | 0.1 | 2.3 | 2 | 3.1 | 4.32 | 1.6 | 1.35 | 1.1 | 4 | 3.82 |
| M2.5 | 0.45 | 0.3 | 0.1 | 2.9 | 2.5 | 4.1 | 5.45 | 2 | 1.75 | 1.4 | 5 | 4.82 |
| M3 | 0.5 | 0.4 | 0.15 | 3.45 | 3 | 4.6 | 6.01 | 2.4 | 2.15 | 1.7 | 5.5 | 5.32 |
| M4 | 0.7 | 0.4 | 0.15 | 4.6 | 4 | 5.9 | 7.66 | 3.2 | 2.9 | 2.3 | 7 | 6.78 |
| M5 | 0.8 | 0.5 | 0.15 | 5.75 | 5 | 6.9 | 8.79 | 4.7 | 4.4 | 3.5 | 8 | 7.78 |
| M6 | 1 | 0.5 | 0.15 | 6.75 | 6 | 8.9 | 11.05 | 5.2 | 4.9 | 3.9 | 10 | 9.78 |
| M8 | 1.25 | 0.6 | 0.15 | 8.75 | 8 | 11.6 | 14.38 | 6.8 | 6.44 | 5.2 | 13 | 12.73 |
| M10 | 1.5 | 0.6 | 0.15 | 10.8 | 10 | 14.6 | 17.77 | 8.4 | 8.04 | 6.4 | 16 | 15.73 |
| M12 | 1.75 | 0.6 | 0.15 | 13 | 12 | 16.6 | 20.03 | 10.8 | 10.37 | 8.3 | 18 | 17.73 |
| M16 | 2 | 0.8 | 0.2 | 17.3 | 16 | 22.5 | 26.75 | 14.8 | 14.1 | 11.3 | 24 | 23.67 |
| M20 | 2.5 | 0.8 | 0.2 | 21.6 | 20 | 27.7 | 32.95 | 18 | 16.9 | 13.5 | 30 | 29.16 |
| M24 | 3 | 0.8 | 0.2 | 25.9 | 24 | 33.3 | 39.55 | 21.5 | 20.2 | 16.2 | 36 | 35 |
| M30 | 3.5 | 0.8 | 0.2 | 32.4 | 30 | 42.8 | 50.85 | 25.6 | 24.3 | 19.4 | 46 | 45 |
| M36 | 4 | 0.8 | 0.2 | 38.9 | 36 | 51.1 | 60.79 | 31 | 29.4 | 23.5 | 55 | 53.8 |
| M42 | 4.5 | 1 | 0.3 | 45.4 | 42 | 60 | 71.3 | 34 | 32.4 | 25.9 | 65 | 63.1 |
| M48 | 5 | 1 | 0.3 | 51.8 | 48 | 69.5 | 82.6 | 38 | 36.4 | 29.1 | 75 | 73.1 |
| M56 | 5.5 | 1 | 0.3 | 60.5 | 56 | 78.7 | 93.56 | 45 | 43.4 | 34.7 | 85 | 82.8 |
| M64 | 6 | 1 | 0.3 | 69.1 | 64 | 88.2 | 104.86 | 51 | 49.1 | 39.3 | 95 | 92.8 |
| (M3.5) | 0.6 | 0.4 | 0.15 | 4 | 3.5 | 5 | 6.58 | 2.8 | 2.55 | 2 | 6 | 5.82 |
| (M14) | 2 | 0.6 | 0.15 | 15.1 | 14 | 19.6 | 23.36 | 12.8 | 12.1 | 9.7 | 21 | 20.67 |
| (M18) | 2.5 | 0.8 | 0.2 | 19.5 | 18 | 24.9 | 29.56 | 15.8 | 15.1 | 12.1 | 27 | 26.16 |
| (M22) | 2.5 | 0.8 | 0.2 | 23.7 | 22 | 31.4 | 37.29 | 19.4 | 18.1 | 14.5 | 34 | 33 |
| (M27) | 3 | 0.8 | 0.2 | 29.1 | 27 | 38 | 45.2 | 23.8 | 22.5 | 18 | 41 | 40 |
| (M33) | 3.5 | 0.8 | 0.2 | 35.6 | 33 | 46.6 | 55.37 | 28.7 | 27.4 | 21.9 | 50 | 49 |
| (M39) | 4 | 1 | 0.3 | 42.1 | 39 | 55.9 | 66.44 | 33.4 | 31.8 | 25.4 | 60 | 58.8 |
| (M45) | 4.5 | 1 | 0.3 | 48.6 | 45 | 64.7 | 76.95 | 36 | 34.4 | 27.5 | 70 | 68.1 |
| (M52) | 5 | 1 | 0.3 | 56.2 | 52 | 74.2 | 88.25 | 42 | 40.4 | 32.3 | 80 | 78.1 |
| (M60) | 5.5 | 1 | 0.3 | 64.8 | 60 | 83.4 | 99.21 | 48 | 46.4 | 37.1 | 90 | 87.8 |
| Size | Product Grade | Standard | Thread Tolerance | Pitch | c Max | c Min | da Max | da Min | dw Min | e Min | m Max | m Min | mw Min | s Max | s Min |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.6 | A | ISO 4032 | 6H | 0.35 | 0.2 | 0.1 | 1.84 | 1.60 | 2.4 | 3.41 | 1.30 | 1.05 | 0.8 | 3.20 | 3.02 |
| 2 | A | ISO 4032 | 6H | 0.4 | 0.2 | 0.1 | 2.3 | 2.0 | 3.1 | 4.32 | 1.60 | 1.35 | 1.1 | 4.00 | 3.82 |
| 2.5 | A | ISO 4032 | 6H | 0.45 | 0.3 | 0.1 | 2.9 | 2.5 | 4.1 | 5.45 | 2.00 | 1.75 | 1.4 | 5.00 | 4.82 |
| 3 | A | ISO 4032 | 6H | 0.5 | 0.40 | 0.15 | 3.45 | 3.00 | 4.6 | 6.01 | 2.40 | 2.15 | 1.7 | 5.50 | 5.32 |
| 3.5 | A | ISO 4032 | 6H | 0.6 | 0.40 | 0.15 | 4.0 | 3.5 | 5 | 6.58 | 2.80 | 2.55 | 2 | 6.00 | 5.82 |
| 3.5 | A | ISO 4032 | 6H | 0.6 | 0.40 | 0.15 | 4.0 | 3.5 | 5 | 6.58 | 2.80 | 2.55 | 2 | 6.00 | 5.82 |
| 5 | A / C | ISO 4032 / ISO 4033 / ISO 4034 | 6H / 7H | 0.8 | 0.50 / 0.5 / - | 0.15 / - | 5.75 / - | 5.00 / - | 6.9 / 6.7 | 8.79 / 8.63 | 4.7 / 5.1 / 5.6 | 4.4 / 4.8 | 3.5 / 3.84 | 8.00 | 7.78 / 7.64 |
| 6 | A / C | ISO 4032 / ISO 4033 / ISO 4034 | 6H / 7H | 1 | 0.50 / 0.5 / - | 0.15 / - | 6.75 / - | 6.00 / - | 8.9 / 8.7 | 11.05 / 10.89 | 5.2 / 5.7 / 6.4 | 4.9 / 5.4 | 3.9 / 4.32 / 3.7 | 10.00 | 9.78 / 9.64 |
| 8 | A / C | ISO 4032 / ISO 4033 / ISO 4034 | 6H / 7H | 1.25 | 0.60 / 0.6 / - | 0.15 / - | 8.75 / - | 8.00 / - | 11.6 / 11.5 | 14.38 / 14.2 | 6.80 / 7.5 / 7.9 | 6.44 / 7.14 / 6.4 | 5.2 / 5.71 / 5.1 | 13.00 | 12.73 / 12.57 |
| 10 | A / C | ISO 4032 / ISO 4033 / ISO 4034 | 6H / 7H | 1.5 | 0.60 / 0.6 / - | 0.15 / - | 10.8 / - | 10.0 / - | 14.6 / 14.5 | 17.77 / 17.59 | 8.40 / 9.3 / 9.5 | 8.04 / 8.94 / 8.0 | 6.4 / 7.15 | 16.00 | 15.73 / 15.57 |
| 12 | A / C | ISO 4032 / ISO 4033 / ISO 4034 | 6H / 7H | 1.75 | 0.60 / 0.6 / - | 0.15 / - | 13 / - | 12 / - | 16.6 / 16.5 | 20.03 / 19.85 | 10.80 / 12.00 / 12.2 | 10.37 / 11.57 / 10.4 | 8.3 / 9.26 | 18.00 | 17.73 / 17.57 |
| 14 | A / C | ISO 4032 / ISO 4033 / ISO 4034 | 6H / 7H | 2 | 0.60 / 0.6 / - | 0.15 / - | 15.1 / - | 14.0 / - | 19.6 / 19.2 | 23.36 / 22.78 | 12.8 / 14.1 / 13.9 | 12.1 / 13.4 | 9.7 / 10.7 | 21.00 | 20.67 / 20.16 |
| 16 | A / C | ISO 4032 / ISO 4033 / ISO 4034 | 6H / 7H | 2 | 0.8 / - | 0.2 / - | 17.3 / - | 16.0 / - | 22.5 / 22 | 26.75 / 26.17 | 14.8 / 16.4 / 15.9 | 14.1 / 15.7 | 11.3 / 12.6 | 24.00 | 23.67 / 23.16 |
| 18 | B / C | ISO 4032 / ISO 4034 / ISO 8673 | 6H / 7H | 2.5 / 1.5 | 0.8 / - | 0.2 / - | 19.5 / - | 18.0 / - | 24.9 / 24.85 | 29.56 | 15.8 / 16.9 | 15.1 | 12.1 / 12.08 | 27.00 | 26.16 |
| 20 | B / C | ISO 4032 / ISO 4033 / ISO 4034 | 6H / 7H | 2.5 | 0.8 / - | 0.2 / - | 21.6 / - | 20.0 / - | 27.7 | 32.95 | 18.0 / 20.3 / 19.0 | 16.9 / 19.0 | 13.5 / 15.2 | 30.00 | 29.16 |
| 22 | B / C | ISO 4032 / ISO 4034 / ISO 8673 | 6H / 7H | 2.5 / 1.5 | 0.8 / - | 0.2 / - | 23.7 / - | 22.0 / - | 31.4 / 31.35 | 37.29 | 19.4 / 20.2 | 18.1 | 14.5 / 14.48 | 34 | 33 |
| 24 | B / C | ISO 4032 / ISO 4033 / ISO 4034 | 6H / 7H | 3 | 0.8 / - | 0.2 / - | 25.9 / - | 24.0 / - | 33.3 / 33.2 | 39.55 | 21.5 / 23.9 / 22.3 | 20.2 / 22.6 | 16.2 / 18.1 | 36 | 35 |
| 27 | B / C | ISO 4032 / ISO 4034 / ISO 8673 | 6H / 7H | 3 / 2 | 0.8 / - | 0.2 / - | 29.1 / - | 27.0 / - | 38 | 45.2 | 23.8 / 24.7 | 22.5 / 22.6 | 18 / 18.1 | 41 | 40 |
| 30 | B / C | ISO 4032 / ISO 4033 / ISO 4034 | 6H / 7H | 3.5 | 0.8 / - | 0.2 / - | 32.4 / - | 30.0 / - | 42.8 / 42.7 | 50.85 | 25.6 / 28.6 / 26.4 | 24.3 / 27.3 | 19.4 / 21.8 | 46 | 45 |
| 33 | B / C | ISO 4032 / ISO 4034 / ISO 8673 | 6H / 7H | 3.5 / 2 | 0.8 / - | 0.2 / - | 35.6 / - | 33.0 / - | 46.6 / 46.55 | 55.37 | 28.7 / 29.5 | 27.4 | 21.9 / 21.92 | 50 | 49 |
| 36 | B / C | ISO 4032 / ISO 4033 / ISO 4034 | 6H / 7H | 4 | 0.8 / - | 0.2 / - | 38.9 / - | 36.0 / - | 51.1 | 60.79 | 31.0 / 34.7 / 31.9 | 29.4 / 33.1 | 23.5 / 26.5 / 23.2 | 55.0 / 55 | 53.8 |
| 39 | B / C | ISO 4032 / ISO 4034 / ISO 8673 | 6H / 7H | 4 / 3 | 1.0 / - | 0.3 / - | 42.1 / - | 39.0 / - | 55.9 / 55.86 | 66.44 | 33.4 / 34.3 | 31.8 | 25.4 / 25.44 | 60.0 | 58.8 |
| 42 | B / C | ISO 4032 / ISO 4034 / ISO 8673 | 6H / 7H | 4.5 / 3 | 1.0 / - | 0.3 / - | 45.4 / - | 42.0 / - | 60 / 59.95 | 71.3 | 34.0 / 34.9 | 32.4 | 25.9 / 25.92 | 65.0 / 65 | 63.1 |
| 45 | B / C | ISO 4032 / ISO 4034 / ISO 8673 | 6H / 7H | 4.5 / 3 | 1.0 / - | 0.3 / - | 48.6 / - | 45.0 / - | 64.7 | 76.95 | 36.0 / 36.9 | 34.4 | 27.5 / 27.52 | 70.0 | 68.1 |
| 48 | B / C | ISO 4032 / ISO 4034 / ISO 8673 | 6H / 7H | 5 / 3 | 1.0 / - | 0.3 / - | 51.8 / - | 48.0 / - | 69.5 / 69.45 | 82.6 | 38.0 / 38.9 | 36.4 | 29.1 / 29.12 | 75.0 / 75 | 73.1 |
| 52 | B / C | ISO 4032 / ISO 4034 / ISO 8673 | 6H / 7H | 5 / 4 | 1.0 / - | 0.3 / - | 56.2 / - | 52.0 / - | 74.2 | 88.25 | 42.0 / 42.9 | 40.4 | 32.3 / 32.32 | 80.0 | 78.1 |
| 56 | B / C | ISO 4032 / ISO 4034 / ISO 8673 | 6H / 7H | 5.5 / 4 | 1.0 / - | 0.3 / - | 60.5 / - | 56.0 / - | 78.7 / 78.66 | 93.56 | 45.0 / 45.9 | 43.4 | 34.7 / 34.72 | 85.0 / 85 | 82.8 |
| 60 | B / C | ISO 4032 / ISO 4034 / ISO 8673 | 6H / 7H | 5.5 / 4 | 1.0 / - | 0.3 / - | 64.8 / - | 60.0 / - | 83.4 / 83.41 | 99.21 | 48.0 / 48.9 | 46.4 | 37.1 / 37.12 | 90.0 | 87.8 |
| 64 | B / C | ISO 4032 / ISO 4034 / ISO 8673 | 6H / 7H | 6 / 4 | 1.0 / - | 0.3 / - | 69.1 / - | 64.0 / - | 88.2 / 88.16 | 104.86 | 51.0 / 52.4 | 49.1 / 49.4 | 39.3 / 39.5 / 39.28 | 95.0 / 95 | 92.8 |
- Row 6 (3.5): The M3.5 row appears twice with identical values — reproduced verbatim.
- Row 5 (3.5): The size column skips 4 in this calculator map (M3.5 jumps to 5); the single-standard table on this page carries M4. Values are not invented for the skipped size.
Materials
- Material, property class and finish specified per RFQ — the collected specification table covers geometry only
Ordering & documentation
Documents
Shipments of ISO 4032 Hex Regular Nuts (Style 1) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 4032 Hex Regular Nuts (Style 1) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (ISO 4032 Hex Regular Nuts (Style 1)), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for ISO 4032 Hex Regular Nuts (Style 1): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for iso 4032 hex regular nuts (style 1) is 10,000 pieces (applies to the standard sizes and finishes for iso 4032 hex regular nuts (style 1); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for iso 4032 hex regular nuts (style 1) run 3–7 days. Quantities or variants of iso 4032 hex regular nuts (style 1) outside the standard range are confirmed at quotation.
Storage & shipping
ISO 4032 Hex Regular Nuts (Style 1) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 4032 hex regular nuts (style 1) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
What does the m w row in the ISO 4032 table represent?
The effective bearing height — the portion of nut height that actually carries thread load after chamfers and countersink are deducted. It is the figure behind bolt-nut strength pairing: a nut must develop the bolt's full tensile strength before its threads strip, and m w is the engagement the standard guarantees for that purpose. This is also why substituting a thinner nut (ISO 4035) reduces the usable engagement even when the across-flats wrench size is identical.
What is the MOQ and lead time for this nut type?
The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common diameters in this nut type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.
What is the MOQ and lead time for ISO 4032 Hex Regular Nuts (Style 1)?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for ISO 4032 Hex Regular Nuts (Style 1) state?
State the full designation (ISO 4032), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your ISO 4032 Hex Regular Nuts (Style 1) inquiry
- ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
- ✓ State the nut property class or material and the bolt class/material it must be paired with.
- ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
- ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
- ✓ Factory-direct pricing for your ISO 4032 Hex Regular Nuts (Style 1)
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support