2H08 Countersunk Two-Hole Security Barrel Nuts & Sex Bolts
Countersunk two-hole spanner-drive security barrel nuts — tamper-resistant sex-bolt pairs (male-female screws) with matched countersunk heads that sit flush, male screws with or without shoulders. Steel, A2 or A4 stainless; made to individual customer requirements — construction fields only.
Last updated: 2026-11
Specifications
The countersunk two-hole security barrel nut is the flush-finish member of the security sex-bolt family: a female barrel nut with a protruding internally threaded boss and a countersunk two-hole flange, paired with a male countersunk security screw — the classic male-female, Chicago-screw or architectural-bolt joint, made tamper-resistant by the two-hole drive that no standard tool turns. Both halves carry matched head dimensions so the countersunk pair finishes level and consistent, and the male screws come with or without shoulders depending on whether the joint needs a locating step. The collected page describes this line as made to individual customer requirements — truss and pan head variants exist in the same series, in steel, A2 stainless or A4 stainless, with pin-torx, pin-hex, clutch-head and wave drives available on the same body. As with the pan-head variant, no dimension table is published for this SKU, so this page carries construction and material fields only; barrel diameters, lengths and head angles are confirmed at quotation against the drawing.
| Designation | 2H08 — countersunk two-hole security barrel nut (sex bolt half); tamper-resistant version of the male-female / Chicago screw joint |
|---|---|
| System | Female barrel nut with protruding internally threaded boss + countersunk male security screw; head dimensions matched for a finished appearance |
| Male screw options (source-stated) | With or without shoulders; truss and pan head variants also available in the series |
| Drive | Two-hole spanner drive requiring a special tool or bit; pin TX, pin hex, clutch head and wave drives available on the same concept |
| Materials (collected) | Steel, A2 stainless steel, A4 stainless steel |
| Supply (source-stated) | Security sex bolts made to individual customer requirements |
| Dimensions | No dimension table in the collected source — sizes to customer requirements, confirmed at quotation |
Materials
- Steel
- A2 stainless steel
- A4 stainless steel
Same three-way split as the pan-head variant, read through the countersunk form: steel with a zinc-plated budget suits enclosed indoor fixtures where the flush head hides the joint anyway; A2 stainless carries outdoor weathering; A4 (316-class, with 2-3 percent molybdenum) is the specified grade where chlorides rule — marine fittings, coastal industrial sites, swimming-pool fittings, food-processing brines and chemical environments.
Countersinking puts the security drive below the surface, which also means the hidden thread sits even further from inspection: in wet or coastal service the A4 row removes a corrosion failure mode that the geometry makes harder to notice, while the two-hole spanner drive — not the material — remains the tamper mechanism.
Ordering & documentation
Documents
Shipments of 2H08 Countersunk Two-Hole Security Barrel Nuts & Sex Bolts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for 2H08 Countersunk Two-Hole Security Barrel Nuts & Sex Bolts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (2H08 Countersunk Two-Hole Security Barrel Nuts & Sex Bolts), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for 2H08 Countersunk Two-Hole Security Barrel Nuts & Sex Bolts: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for 2h08 countersunk two-hole security barrel nuts & sex bolts is 10,000 pieces (applies to the standard sizes and finishes for 2h08 countersunk two-hole security barrel nuts & sex bolts; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for 2h08 countersunk two-hole security barrel nuts & sex bolts run 3–7 days. Quantities or variants of 2h08 countersunk two-hole security barrel nuts & sex bolts outside the standard range are confirmed at quotation.
Storage & shipping
2H08 Countersunk Two-Hole Security Barrel Nuts & Sex Bolts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store 2h08 countersunk two-hole security barrel nuts & sex bolts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
What do I gain making a standard sex-bolt joint tamper-resistant?
A flush face with nothing to turn. The countersunk male-female pair already hides both threads inside the joint; the two-hole drive removes the last grip a standard screwdriver or coin could find, so architectural panels, signage and furniture keep their clean look while resisting casual interference. Legitimate servicing just needs the matching two-hole bit — and the male screw's shoulder option lets you add a locating step where the joint needs it.
How is this ordered differently from catalogued barrel nuts?
As a made-to-order item. The collected page states these security sex bolts are made to individual customer requirements, so the RFQ should carry the drawing: barrel diameter and length, thread, head angle and diameter, material, shoulder or plain male screw, and the drive on both halves. We confirm the full dimension set at quotation rather than publishing table values the source does not provide.
What is the MOQ and lead time for this nut type?
The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common diameters in this nut type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.
What should an RFQ for this nut type state?
State the designation (for example the spanner-drive SKU and head style), nominal thread size and pitch, material and finish, whether the matching drive tool or bit is needed, the mating screw or stud specification, required certificates, and quantity per size — plus destination country.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your 2H08 Countersunk Two-Hole Security Barrel Nuts & Sex Bolts inquiry
- ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
- ✓ State the nut property class or material and the bolt class/material it must be paired with.
- ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
- ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
- ✓ Factory-direct pricing for your 2H08 Countersunk Two-Hole Security Barrel Nuts & Sex Bolts
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support