ISO 7044 Prevailing Torque All-Metal Hexagon Nuts with Flange

ISO 7044 prevailing torque type all-metal hexagon nuts with flange, M5 to M20: pitch, height m, collar h, flange c/dc and wrench geometry — current and superseded editions.

Last updated: 2026-11

Request a Quote

ISO 7044 Prevailing Torque All-Metal Hexagon Nuts with Flange in an industrial setting
Illustrative image redrawn from real ISO 7044 Prevailing Torque All-Metal Hexagon Nuts with Flange product references — not a photograph of stocked items.

Specifications

ISO 7044 is the current all-metal flange locknut: the flange replaces the washer (bearing diameter dc max 42.8 at M20 against the bolt's much smaller shank), and the all-metal collar gives prevailing torque that survives heat and chemicals. The collected 09/2000-edition table runs M5 to M20 with thread pitch P, nut height m min (18.7 at M20), the collar height band h min÷max (20.3÷22.4 at M20 — the distorted locking section that houses the prevailing-torque geometry), flange thickness c min (3 at M20), flange diameter dc max and the wrench data s nom=max (30 at M20) / e min (32.95). The source page also prints the superseded 11/1997 edition as a second table — transcribed verbatim alongside, since legacy drawings still carry it. This is the locknut of choice for new designs in hot or aggressive service: no polymer insert to melt, and the flange spreads clamp without a separate washer to forget.

Standard / scope ISO 7044 prevailing torque type all-metal hexagon nuts with flange — M5 to M20, edition 09/2000; superseded 11/1997 edition transcribed as a separate table
Height / collar m min 18.7 at M20; collar band h min÷max 20.3÷22.4 — the all-metal prevailing-torque section
Flange c min 3 (M20); dc max 42.8 at M20 — the built-in bearing circle that replaces the washer
Wrench geometry s nom=max 30 at M20 (flange series WAF); e min 32.95; pitch P 2.5 at M20
Not tabulated Property class, prevailing torque, temperature/chemical rating, finish — per RFQ
ISO 7044 prevailing-torque all-metal hexagon nuts with flange — 09/2000 edition, geometry by thread dDimensions in mm unless stated; cell values, symbols and decimal marks exactly as printed on the source page. Column 1 is the row label.
d Thread sizePm minh min÷maxc mindc maxs nom=maxe min
M 50.84.75.7÷6.2111.888.79
M 615.76.8÷7.31.114.21011.05
M 81.257.648.74÷9.41.217.91314.38
M 101.59.6410.34÷11.41.521.81516.64
M 121.7511.5712.57÷13.81.8261820.03
M 14213.314.8÷15.92.129.92123.36
M 16215.317.2÷18.32.434.52426.75
M 202.518.720.3÷22.4342.83032.95
  • Source spanning title row carried verbatim: "Dimensions in mm - source ISO 7044 Publication date: 09 - 2012".
ISO 7044 prevailing-torque all-metal hexagon nuts with flange — superseded 11/1997 edition, geometry by thread dDimensions in mm unless stated; cell values, symbols and decimal marks exactly as printed on the source page. Column 1 is the row label.
d Thread sizePm minh min÷maxc mindc maxs nom=maxe min
M 50.84.75.7÷6.2111.888.79
M 615.76.8÷7.31.114.21011.05
M 81.257.648.74÷9.41.217.91314.38
M 101.59.6410.34÷11.41.521.81516.64
M 121.7511.5712.57÷13.81.8261820.03
M 14213.314.8÷15.92.129.92123.36
M 16215.317.2÷18.32.434.52426.75
M 202.518.720.3÷22.4342.83032.95
  • Source spanning title row carried verbatim: "Dimensions in mm - source ISO 7044 Publication date: 11 - 1997".

Materials

  • Order in property class 8/10/12 steel with the collar distortion and coating sequenced so the locking threads stay clean (flag any plating — it changes prevailing torque); A2/A4 stainless for corrosive service. The all-metal collar is the temperature answer — state service temperature on the RFQ where it exceeds polymer-insert territory, and confirm whether mating bolts need the flange-compatible extra length for the collar band h

Ordering & documentation

Documents

Shipments of ISO 7044 Prevailing Torque All-Metal Hexagon Nuts with Flange are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 7044 Prevailing Torque All-Metal Hexagon Nuts with Flange orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ISO 7044 Prevailing Torque All-Metal Hexagon Nuts with Flange), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for ISO 7044 Prevailing Torque All-Metal Hexagon Nuts with Flange: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for iso 7044 prevailing torque all-metal hexagon nuts with flange is 10,000 pieces (applies to the standard sizes and finishes for iso 7044 prevailing torque all-metal hexagon nuts with flange; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for iso 7044 prevailing torque all-metal hexagon nuts with flange run 3–7 days. Quantities or variants of iso 7044 prevailing torque all-metal hexagon nuts with flange outside the standard range are confirmed at quotation.

Storage & shipping

ISO 7044 Prevailing Torque All-Metal Hexagon Nuts with Flange are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 7044 prevailing torque all-metal hexagon nuts with flange dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

All-metal or nylon-insert locknut — how do I decide?

By environment and reuse count. The nylon insert (a different product family) gives lower run-in torque and cheap repeatable locking — up to roughly 120 °C and away from solvents. ISO 7044's all-metal collar keeps locking where the insert would melt, soften or creep: exhaust-adjacent flanges, ovens, engine peripherals, chemical plants — and it does not lose the lock as fast across repeated re-assembly, because the spring is steel. The flange is the second decision: it deletes the washer and resists embedment into softer surfaces, which on vibration-loaded joints is often the actual failure mode. If your joint is hot, chemical, or heavily vibrated, this is the standard; the tables carry the geometry, and we confirm property class and prevailing-torque class at quotation.

Why are there two edition tables, and does the 1997/2000 difference matter to my drawing?

The source page prints the current 09/2000 edition and the superseded 11/1997 edition as separate tables and both are transcribed verbatim — the audit path for legacy drawings that still call the 1997 document. Reading the two grids, the tabulated geometry carries through with only the edition rows and fine details differing; the practical risk is not the dimensions but the call-out: a drawing citing ISO 7044:1997 should be updated to the 2000 edition for new procurement so quality plans reference the current standard. If you are substituting a DIN all-metal flange nut (the withdrawn DIN 6923/6926-class call-outs), send the drawing and we verify the m/h/c/dc columns here against it before quoting, wrench size (s) included.

What is the MOQ and lead time for ISO 7044 Prevailing Torque All-Metal Hexagon Nuts with Flange?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for ISO 7044 Prevailing Torque All-Metal Hexagon Nuts with Flange state?

State the full designation (ISO 7044 Prevailing Torque All-Metal Hexagon Nuts with Flange), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ISO 7044 Prevailing Torque All-Metal Hexagon Nuts with Flange inquiry

  • ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
  • ✓ State the nut property class or material and the bolt class/material it must be paired with.
  • ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
  • ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
  • ✓ Factory-direct pricing for your ISO 7044 Prevailing Torque All-Metal Hexagon Nuts with Flange
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.