DIN 315 Wing Nuts

Metric wing nuts (butterfly nuts) per DIN 315, German type — two rounded wings for hand tightening, M4 to M24 in steel and stainless steel A2/A4. No wrench needed: fast, tool-free clamping for quick-release and frequently serviced joints.

Last updated: 2026-11

Request a Quote

DIN 315 Wing Nuts in an industrial setting
Illustrative image redrawn from real DIN 315 Wing Nuts product references — not a photograph of stocked items.

Specifications

The wing nut is the fastening you operate without tools: two rounded wings give thumb and forefinger enough leverage to run the nut down and clamp it by hand — which is what makes quick-release covers, clamping handles, adjustment points and frequently serviced joints practical. DIN 315 is the metric wing-nut standard of the German type, with two rounded wing-like projections; the collected dimensions table runs from M4 to M24, supplied in steel and stainless steel A2 and A4. The standard has no ISO successor: DIN standards continue to be used for parts with no ISO equivalent, and wing nuts are named as exactly that case, so DIN 315 remains the ordering designation. A wing nut holds by hand pressure, not by wrench torque — it belongs where the clamp is set and released by hand, not in torque-specified or vibration-critical joints. The collected table tabulates per-size values for D2, E, G, H and A; see the worked M10 row in the specification.

Standard DIN 315 — metric wing nuts (butterfly nuts), German type, two rounded wings
Size range M4 – M24
Dimensions at M10 D2 max 20.0 mm; E max 51.0 mm; G max 4.9 mm; H max 25.0 mm; A 20 mm
Materials Steel and stainless steel A2 / A4
Operation Turned by thumb and forefinger — no wrench; quick hand tensioning and clamping
Standard status DIN 315 has no ISO equivalent — the DIN designation remains in use for wing nuts
DIN 315 wing nuts, rounded wings - per-size dimensions (M4 - M24)All dimensions in millimeters.
Nominal threadPitch, coarse (mm)dk max (mm)dk min (mm)ds max (mm)ds min (mm)L max (mm)L min (mm)y max (mm)y min (mm)y1 max (mm)y1 min (mm)Height k max (mm)k min (mm)Height m max (mm)m min (mm)r ≈ (mm)R ≈ (mm)
M40.78675.520181.91.12.31.710.58.54.63.223
M50.811897.526242.31.52.82.313116.542.54
M61131011933302.31.53.32.717158535
M81.25161312.510.539362.824.43.62018106.536
M101.5201716.514.551484.43.65.44.6252312858
M121.75232019.517.565624.94.16.45.633.5311410610
M1622926232173706.45.67.56.537.5351713711
M202.53532292790866.96.18746.5442116814
M243444137.5351101069.48.610.59.556.553.52520918

Materials

  • Steel
  • Stainless steel

DIN 315 is a hand-operated fastener, and the material decision starts from the torque reality: wing nuts deliver only about 5 to 10 percent of the preload of a torqued hex nut because fingers cannot generate spanner-equivalent torque — never for structural, lifting or load-bearing joints.

Hand-tightening is the design intent: the joint only needs enough preload to hold against operating conditions, prioritising quick tool-free assembly and removal. Steel covers general fixtures, guards and adjustable workholding; stainless A2/A4 (choose A4 for chloride exposure) serves the marine, boat and outdoor hardware where wet-hand and washdown contact are routine.

Ordering & documentation

Documents

Shipments of DIN 315 Wing Nuts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 315 Wing Nuts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 315 Wing Nuts), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for DIN 315 Wing Nuts: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for din 315 wing nuts is 10,000 pieces (applies to the standard sizes and finishes for din 315 wing nuts; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 315 wing nuts run 3–7 days. Quantities or variants of din 315 wing nuts outside the standard range are confirmed at quotation.

Storage & shipping

DIN 315 Wing Nuts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 315 wing nuts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

When is a wing nut the right choice — and when is it not?

Wherever the clamp is set and released by hand: quick-release covers, handles, adjustment points, anything assembled often without tools. The two rounded wings give thumb and forefinger the leverage for fast hand tightening and release. What wing nuts do not suit are torque-specified or vibration-critical joints — they hold by hand pressure, not by installation torque; there, a hex nut or a lock nut remains the right choice.

Is DIN 315 still the current designation for wing nuts?

Yes. The collected supplier reference notes that DIN standards continue to be used for parts which do not have ISO equivalents — naming DIN 315 wing nuts as that case — so there is no ISO number to migrate to. Order to DIN 315 and the thread size; drawings that carry a wing-nut callout without a standard number should be confirmed against the DIN 315 dimension pattern before production.

What is the MOQ and lead time for this nut type?

The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common diameters in this nut type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

What should an RFQ for this nut type state?

State the standard designation (for example DIN 985 or DIN 6923), nominal thread size and pitch (metric coarse unless fine pitch is required), material and strength pairing with the mating bolt, finish (plain, zinc, or hot-dip galvanized where compatible), required certificates such as a mill test report per EN 10204 3.1, and quantity per size — plus destination country.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 315 Wing Nuts inquiry

  • ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
  • ✓ State the nut property class or material and the bolt class/material it must be paired with.
  • ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
  • ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
  • ✓ Factory-direct pricing for your DIN 315 Wing Nuts
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.