MS21042 Self-Locking Jet Nuts (450 °F Steel)

MS21042 all-metal self-locking hex jet nuts in corrosion- and heat-resistant steel, rated 450 °F service at 160 KSI — the military-standard counterpart to the NASM21042/NAS1291 aerospace series, specified per dash number with thread, grip, width across flats, nut height, washer diameter and torque values.

Last updated: 2026-11

Request a Quote

MS21042 Self-Locking Jet Nuts (450 °F Steel) in an industrial setting
Illustrative image redrawn from real MS21042 Self-Locking Jet Nuts (450 °F Steel) product references — not a photograph of stocked items.

Specifications

The MS21042 jet nut is the compact all-metal lock nut of military-aerospace practice: a hex nut with a collared, chamfered body and an all-metal locking feature, named for its origin on jet engines where nylon inserts die young. The series is rated 450 °F service at 160 KSI tensile in corrosion- and heat-resistant steel, and the standard sheet text describes it as self-locking, sheet-metal class, hex flywheel nuts — the thin-wall, extended-grip geometry that lets a lock nut live where envelope height is scarce. Dash numbers run the familiar K-nut ladder and select, per size: the thread and grip range, width across flats, nut height, washer (flange) diameter and the installation torque value; the collected guide tabulates these per dash number. MS21042 sits in the same family as the NAS1291 page on this site — the NASM21042/NASM21043 redesignations superseded parts of the older dash ladders — and the choice between them is a drawing-callout question, not a performance race: match the series your engineering data cites. All-metal locking means the nut is removed and reused only within its locking-torque limits, and temperature class is part of the callout: the 800 °F applications belong to the A286 MS21043, not this steel series.

Standard MS21042 — nut, self-locking, sheet metal, hex flywheel, 450 °F, 160 KSI, corrosion/heat-resistant steel
Type All-metal self-locking hex jet (K-)nut, collared with chamfered washer face
Temperature / strength rating 450 °F continuous service; 160 KSI tensile basis
Selection basis Per dash number: thread size and grip range, width across flats, nut height, washer diameter, torque value
Family note Counterpart to the NAS1291/NASM21042 aerospace series (see NASM21042/NASM21043 for inactive-dash supersessions); 800 °F service uses the A286 MS21043

Materials

  • Corrosion- and heat-resistant steel (450 °F class)

The 450 F class in the MS21042 callout is an all-metal ceiling, not a nylon limit: a collected aerospace guide tabulates the nylon-insert alternative at "Approximately 250°F before the nylon insert degrades" against "Approximately 450°F, since there's no polymer to break down" for the all-metal column, and the MS21042 is that all-metal column — its lock comes from a deformed section of thread near the top of the nut, not from any insert.

Spec-sheet data recorded for the series matches the page rating: a 450.0 deg fahrenheit nominal temp rating, steel overall as the material, and a cadmium overall surface treatment as the corrosion budget — cadmium plating, not the CRES base metal, is what the 450 F-class steel dash relies on in ordinary atmospheres.

Reuse discipline differs from the nyloc world: the same guide rates the all-metal nut as limited-reuse rather than single-use, but warns that locking torque drops noticeably after the first removal — so spec a new nut per installation where the preload matters, and torque-check reused nuts against the prevailing-torque minimum.

Ordering & documentation

Documents

Shipments of MS21042 Self-Locking Jet Nuts (450 °F Steel) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for MS21042 Self-Locking Jet Nuts (450 °F Steel) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (MS21042 Self-Locking Jet Nuts (450 °F Steel)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for MS21042 Self-Locking Jet Nuts (450 °F Steel): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for ms21042 self-locking jet nuts (450 °f steel) is 10,000 pieces (applies to the standard sizes and finishes for ms21042 self-locking jet nuts (450 °f steel); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for ms21042 self-locking jet nuts (450 °f steel) run 3–7 days. Quantities or variants of ms21042 self-locking jet nuts (450 °f steel) outside the standard range are confirmed at quotation.

Storage & shipping

MS21042 Self-Locking Jet Nuts (450 °F Steel) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store ms21042 self-locking jet nuts (450 °f steel) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

MS21042 or NAS1291 — which lock nut does my drawing mean?

Whichever the drawing cites: they are sibling series in the same K-nut family, and the dash-number ladders overlap but are not interchangeable part-for-part. MS21042 is the military-standard steel 450 °F / 160 KSI jet nut; NAS1291 is the NAS part standard with steel (450 °F) and A286 (450/800 °F) variants, several of whose smallest dashes were inactivated in favour of the NASM21042/NASM21043 redesignations. Quote the cited designation and dash number, not a "close equivalent".

What should an RFQ for MS21042 nuts state?

The designation and dash number from the engineering drawing, which fixes thread and grip; temperature class confirmation (450 °F steel series — 800 °F needs MS21043); any plating or lubrication callout; quantity per dash; and whether certificates accompany the parts. Per-dash dimensions and torque values are confirmed with the quotation.

What is the MOQ and lead time for this nut type?

The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Confirm the exact schedule against quantity and size mix at quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your MS21042 Self-Locking Jet Nuts (450 °F Steel) inquiry

  • ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
  • ✓ State the nut property class or material and the bolt class/material it must be paired with.
  • ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
  • ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
  • ✓ Factory-direct pricing for your MS21042 Self-Locking Jet Nuts (450 °F Steel)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.