NASM25027 Inch Prevailing-Torque Lock Nuts (Flexloc Pattern)

All-metal prevailing-torque hex lock nuts, inch series per the NASM25027 pattern (full-height, heavy-duty, coarse threads .250-20 through 2.000-4 1/2) — with the collected Flexloc SP1040 geometry ladder and minimum axial-strength columns in pounds by material.

Last updated: 2026-11

Request a Quote

NASM25027 Inch Prevailing-Torque Lock Nuts (Flexloc Pattern) in an industrial setting
Illustrative image redrawn from real NASM25027 Inch Prevailing-Torque Lock Nuts (Flexloc Pattern) product references — not a photograph of stocked items.

Specifications

This is the inch-series member of the all-metal prevailing-torque family: a heavy-duty hex lock nut whose collared, slotted top section flexes elastically onto the bolt threads, so the joint keeps its preload under vibration with no nylon insert to melt, age or shed — the same locking principle as the metric ISO 7042/DIN 980 class of nuts, but sized and strength-rated in the inch world. The collected table is the full-height heavy-duty pattern in coarse threads, from .250-20 UNC-2B through 2.000-4 1/2 UNC-2B, and it carries two things most lock-nut sheets do not: the full inch geometry set (C reference across corners, H height, S slot width, W across flats in a max/min pair) AND minimum axial-strength columns in pounds for steel & corrosion-resistant steel, aluminum and brass — the ladder a design engineer can actually size against (5,730 lbs at 1/4-inch up to 310,000 lbs at 2-inch in steel & CRES). Part numbers in the pattern carry the dash number and a series letter (FAC/FA at the small end, FN from 1.125 up); the catalog notes style A and style B of the pattern are supplied at the manufacturer's option, and that tabulated dimensions apply to the nuts prior to lubrication where a dry-film lubricant is specified. What this table deliberately does not give you: prevailing-torque installation/removal values and property-class callouts are not tabulated — confirm both at quotation with the mating bolt specified.

Standard NASM25027 pattern — all-metal prevailing-torque lock nuts, full-height heavy-duty hex, inch series (catalog source is the Flexloc SP1040 pattern sheet)
Size range .250-20 UNC-2B through 2.000-4 1/2 UNC-2B, eighteen coarse-thread sizes; 1.625 and 1.875 sizes are 5 1/2 NS-2B / 5 NS-2B per the table
Geometry C ref .552 → 3.552; H .290 → 2.009; S .094 → 1.018; W max .502 → 3.127 (W min .492 → 3.112) — inches
Axial strength, steel & CRES (min) 5,730 → 310,000 lbs across the ladder
Axial strength, aluminum (min) 4,000 → 155,000 lbs
Axial strength, brass (min) 2,040 → 132,700 lbs
Style Pattern styles A and B supplied at the manufacturer's option (per the catalog note)
Lubrication note Tabulated dimensions apply prior to lubrication on dry-film-lubricated nuts (catalog note)
Prevailing torque / property class Not tabulated by the collected sheet — confirm installation and removal torque values and material property callouts per RFQ
NASM25027-pattern full-height heavy-duty hex lock nuts, coarse threads (inch series) — geometry and minimum axial strengthAll dimensions in inches; axial strength columns are minimum values in pounds (lbf) by nut material, as tabulated by the pattern sheet. Tabulated dimensions apply prior to lubrication on dry-film-lubricated nuts (catalog note). Prevailing-torque values are not tabulated — per RFQ.
Dash NoThreadsC refHSW maxW minAxial strength min, steel & CRES (lbs)Axial strength min, aluminum (lbs)Axial strength min, brass (lbs)
FAC 420.250-20 UNC-2B.552.290.094.502.4925,7304,0002,040
FA 518.312-18 UNC-2B.622.321.113.564.5539,6005,8003,680
FA 616.375-16 UNC-2B.696.384.144.627.61613,8006,9005,420
FA 714.437-14 UNC-2B.837.446.163.752.74114,9007,4706,400
FA 813.500-13 UNC-2B.907.509.196.814.80322,00011,0009,430
FAC 912.562-12 UNC-2B1.051.571.216.940.92827,00013,70011,700
FA 1011.625-11 UNC-2B1.119.634.2451.002.99034,00017,00014,500
FA 1210.750-10 UNC-2B1.260.759.3251.1271.11550,00024,90021,300
FA 1409.875-9 UNC-2B1.470.884.3971.3141.30164,60034,10029,200
FA 16081.000-8 UNC-2B1.6821.009.4621.5021.48985,00042,40037,900
FN 18071.125-7 UNC-2B2.0381.134.5491.8141.801106,00053,00046,700
FN 20071.250-7 UNC-2B2.2501.259.6162.0021.988125,00063,30055,000
FN 22061.375-6 UNC-2B2.4841.384.6842.1902.176145,00072,50062,100
FN 24061.500-6 UNC-2B2.6971.509.7482.3772.363182,00091,00078,000
FN 26051.625-5 1/2NS-2B2.9091.634.8142.5642.549194,00097,00083,100
FN 28051.750-5 UNC-2B3.1241.759.8822.7522.737233,000116,50099,800
FN 30051.875-5 NS-2B3.3381.884.9502.9402.925257,000128,500110,100
FN 32042.000-4 1/2UNC-2B3.5522.0091.0183.1273.112310,000155,000132,700
  • Row 16 (FN 2805): Source PDF text layer prints this row's strength triplet (233,000 / 116,500 / 99,800) on physically separated lines; sequential pairing applied per the registered intake adjudication (x207-corpus-evidence-intake-20261106).
  • Row 17 (FN 3005): Strength triplet (257,000 / 128,500 / 110,100) printed on separated lines; sequential pairing applied, flagged in the intake record.
  • Row 18 (FN 3204): Strength triplet (310,000 / 155,000 / 132,700) printed on separated lines; sequential pairing applied, flagged in the intake record.
  • The pattern sheet supplies style A and style B of the pattern at the manufacturer's option; the table is common to both styles as printed.

Materials

  • Strength columns are tabulated for steel & corrosion-resistant steel, aluminum and brass — material selection trades axial strength against weight and corrosion: the aluminum ladder carries roughly half the steel values, brass slightly lower again. Finish, plating and dry-film lubricant options are not tabulated — specify the environment and the mating bolt at quotation

Ordering & documentation

Documents

Shipments of NASM25027 Inch Prevailing-Torque Lock Nuts (Flexloc Pattern) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for NASM25027 Inch Prevailing-Torque Lock Nuts (Flexloc Pattern) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (NASM25027 Inch Prevailing-Torque Lock Nuts (Flexloc Pattern)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for NASM25027 Inch Prevailing-Torque Lock Nuts (Flexloc Pattern): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for nasm25027 inch prevailing-torque lock nuts (flexloc pattern) is 10,000 pieces (applies to the standard sizes and finishes for nasm25027 inch prevailing-torque lock nuts (flexloc pattern); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for nasm25027 inch prevailing-torque lock nuts (flexloc pattern) run 3–7 days. Quantities or variants of nasm25027 inch prevailing-torque lock nuts (flexloc pattern) outside the standard range are confirmed at quotation.

Storage & shipping

NASM25027 Inch Prevailing-Torque Lock Nuts (Flexloc Pattern) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store nasm25027 inch prevailing-torque lock nuts (flexloc pattern) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

This page and the ISO 7042 prevailing-torque page in this catalog — how do the two relate?

Same locking principle, different sizing worlds, and the tables do not overlap numerically. The ISO 7042 page is metric M3–M39 with the da/dv/e/h/m/s geometry ladder and, deliberately, no strength or material table ("per RFQ"). This page is the inch series (.250-20 through 2.000-4 1/2) with inch geometry AND minimum axial-strength columns in pounds. You cannot convert one into the other for ordering: an inch drawing calls the inch nut, a metric drawing calls the metric nut, and neither table's numbers may be read into the other's sizes. What transfers between them is only the class-level behavior: an all-metal collared lock nut holds preload under vibration and heat where a nylon insert would fail, and needs more bolt protrusion than a plain nut to engage the locking section.

Can I use these axial-strength numbers as design allowables?

Treat them as minimum catalog strengths for the nut, not as joint allowables. The columns are printed minima by nut material (steel & CRES, aluminum, brass) from the pattern sheet; joint design still has to account for the bolt, the thread engagement and the prevailing-torque section, and the sheet does not tabulate torque values or property classes. If your application runs near the printed minima, ask for the test basis and lot certification at quotation — and note the catalog's own caveat that tabulated dimensions apply prior to lubrication on dry-film-lubricated nuts.

What should an RFQ for these lock nuts state?

State the size as the dash number or thread callout exactly as tabulated (for example .500-13 UNC-2B, or FN 813 in the pattern numbering), nut material (steel, corrosion-resistant steel, aluminum or brass), the mating bolt specification and strength, any dry-film lubricant or plating requirement, required certificates such as a mill test report per EN 10204 3.1, and quantity per size — plus destination country. Confirm the prevailing-torque installation and removal values against your bolt if the joint is torque-critical: the tabulated columns cover geometry and axial strength, not torque.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your NASM25027 Inch Prevailing-Torque Lock Nuts (Flexloc Pattern) inquiry

  • ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
  • ✓ State the nut property class or material and the bolt class/material it must be paired with.
  • ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
  • ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
  • ✓ Factory-direct pricing for your NASM25027 Inch Prevailing-Torque Lock Nuts (Flexloc Pattern)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.