ASME B18.2.2 Hex Coupling Nuts (Inch Series)

ASME B18.2.2 hex coupling nuts, inch series #6 – 6 in — the elongated hex nut that joins two threaded rods end-to-end or extends a stud, with the collected per-size table: width across flats and corners, thickness (roughly 1 x nominal diameter) and basic thread major diameter.

Last updated: 2026-11

Request a Quote

ASME B18.2.2 Hex Coupling Nuts (Inch Series) in an industrial setting
Illustrative image redrawn from real ASME B18.2.2 Hex Coupling Nuts (Inch Series) product references — not a photograph of stocked items.

Specifications

The hex coupling nut is the inch-system splice: a hex nut of roughly one nominal-diameter thickness that is threaded its full length so two studs or threaded rods can be screwed into it from both ends and joined in tension — rod-to-rod extensions, anchor-bolt adjusters, and any place a weld or coupling machining would be the alternative. Its thread length is what separates it from every other hex nut in B18.2.2: a standard hex nut threads only a few pitches deep, while a coupling nut is tapped through, so thread engagement is set by how far each rod is screwed in, not by the nut's height. The collected table runs #6 through 6 in — one of the widest size ladders on this site, because coupling nuts live in construction and utility work where large rod sizes are routine — and carries per size: basic major diameter of thread, width across flats F (basic/min/max), across corners G (min/max) and thickness H (basic/min/max). Thickness tracks the nominal size (1/2 in nut: 1 3/4 in thick; 2 in nut: 6 in thick), which is the dimension that gives the joint its engagement depth. Two reading notes live in the table footnotes: the source repeats its header block between column groups, and the 3 in row prints the across-flats basic as "4.5/8" — kept verbatim, read as 4 5/8 against its min/max cells. Property classes and finishes are not tabulated by the collected specification — per RFQ.

Standard ASME B18.2.2-2010 — square and hex nuts, inch series (hex coupling nut: full-length threaded elongated hex nut for joining threaded rod/stud end-to-end)
Size range Nominal #6 – 6 in, thirty-six sizes in three source column groups (#6–1, 1 1/8–3, 3 1/4–6); threads per the UNC ladder of each size
Tabulated geometry Per size: basic major dia. of thread, width across flats F (basic/min/max), width across corners G (min/max), thickness H (basic/min/max, e.g. 1/2 in: F 11/16 basic, H 1 3/4 basic / 1.690 min / 1.760 max)
Engagement Threaded full length; engagement is set by rod insertion depth per end (source Note 1: nuts furnished without hole unless ordered; optional visual-aid hole at mid-nut thickness, 0.2–0.4 x nominal dia., or 1 in for 2 3/4 in and larger)
Property classes / finishes Not tabulated by the collected specification — per RFQ (state grade and finish at quotation)
ASME B18.2.2 hex coupling nuts (inch) — per-size dimensions (#6 – 6 in)All dimensions in inches. Attribute labels follow the source: F = width across flats (basic/min/max); G = width across corners (min/max); H = thickness, hex nut (basic/min/max); Basic Major Diameter of Thread printed per size. Source Note 1, kept in intent: nuts are furnished without a hole unless ordered; where a visual half-engagement aid is wanted, a hole may be drilled through one side at mid-nut thickness, diameter 0.2–0.4 x nominal size (2 1/2 in. and smaller) or 1 in. (2 3/4 in. and larger). Property classes and finishes are not tabulated by the collected specification.
Nominal SizeBasic Major Dia. of ThreadF — Width Across Flats (basic)F — Min.F — Max.G — Width Across Corners Min.G — Max.H — Thickness (basic)H — Min.H — Max.
#60.1385/160.3020.3120.3440.3611/20.4700.510
#80.1645/160.3020.3120.3440.3615/80.5950.645
#100.1905/160.3020.3120.3440.3613/40.7110.760
1/40.2507/160.4280.4380.4880.5051 3/41.6901.760
5/160.3121/20.4890.5000.5570.5771 3/41.6901.760
3/80.3759/160.5510.5620.6280.6501 3/41.6901.760
7/160.4375/80.6070.6250.6920.7221 3/41.6901.760
1/20.50011/160.6630.6880.7560.7941 3/41.6901.760
9/160.56213/160.7820.8130.8910.9392 1/82.0672.135
5/80.62513/160.7820.8130.8910.9392 1/82.0672.135
3/40.75010.9631.0001.0971.1552 1/42.1902.260
7/80.8751 1/41.2121.2501.3821.4432 1/22.4402.510
11.0001 3/81.3251.3751.5111.5882 3/42.6902.760
1 1/81.1251 1/21.4501.5001.6531.73232.9403.010
1 1/41.2501 5/81.5751.6251.8251.87632.9403.010
1 1/21.50021.9502.0002.2752.3093 1/23.4403.510
1 5/81.6252 9/162.4812.5622.8282.9594 7/84.8304.910
1 3/41.7502 3/42.6622.7503.0353.1755 1/45.2105.290
1 7/81.8752 15/162.8442.9383.2423.3925 5/85.5805.670
22.0003 1/83.0253.1253.4483.60865.9506.040
2 1/42.2503 1/23.3883.5003.8624.0416 3/46.7006.800
2 1/22.5003 7/83.7503.8754.2754.4747 1/27.4407.550
2 3/42.7504 1/44.1124.2504.6884.9078 1/48.1908.310
33.0004.5/84.4754.6255.1015.34098.9409.060
3 1/43.25054.8385.0005.5155.7739 3/49.6809.810
3 1/23.5005 3/85.2005.3755.9286.20610 1/210.43010.570
3 3/43.7505 3/45.5625.7506.3406.63911 1/411.17011.320
44.0006 1/85.9256.1256.7547.0721211.92012.080
4 1/44.2506 1/26.2886.5007.1687.50612 3/412.67012.830
4 1/24.5006 7/86.6506.8757.5817.93913 1/213.42013.580
4 3/44.7507 1/47.0127.2507.9948.37214 1/414.16014.340
55.0007 5/87.3757.6258.4088.8051514.91015.090
5 1/45.25087.7388.0008.8219.23815 3/415.65015.850
5 1/25.5008 3/88.1008.3759.2349.67116 1/216.40016.600
5 3/45.7508 3/48.4628.7509.64710.10417 1/417.15017.350
66.0009 1/88.8259.12510.06010.5371817.89018.110
  • Row 25 (3 1/4): The source repeats the full column-header block between column groups (before the 1 1/8 and 3 1/4 rows); duplicates are not reproduced as data. The 3 in. row prints the across-flats basic as '4.5/8' (read: 4 5/8, consistent with the min 4.475 / max 4.625 cells); kept verbatim.

Materials

  • Material, property class and finish specified per RFQ — coupling nuts carry full rod load in tension, so grade matching to the rod matters; state the rod grade at quotation

Ordering & documentation

Documents

Shipments of ASME B18.2.2 Hex Coupling Nuts (Inch Series) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ASME B18.2.2 Hex Coupling Nuts (Inch Series) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ASME B18.2.2 Hex Coupling Nuts (Inch Series)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for ASME B18.2.2 Hex Coupling Nuts (Inch Series): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for asme b18.2.2 hex coupling nuts (inch series) is 10,000 pieces (applies to the standard sizes and finishes for asme b18.2.2 hex coupling nuts (inch series); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for asme b18.2.2 hex coupling nuts (inch series) run 3–7 days. Quantities or variants of asme b18.2.2 hex coupling nuts (inch series) outside the standard range are confirmed at quotation.

Storage & shipping

ASME B18.2.2 Hex Coupling Nuts (Inch Series) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store asme b18.2.2 hex coupling nuts (inch series) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

How much thread engagement does a coupling nut give, and what does the thickness dimension actually buy me?

Look at the H column: the basic thickness of a B18.2.2 coupling nut tracks its nominal diameter — a 1/2 in coupling nut is 1 3/4 in thick, a 1 in nut is 2 3/4 in, a 2 in nut is 6 in. Because the nut is tapped through, that thickness is pure available thread: screw a rod in halfway from each side and each rod gets roughly half the nut thickness of engagement — on the 1 in nut, about 1 3/8 in of thread per rod, or around twelve-plus full pitches of UNC thread. That is several times the engagement a standard hex nut offers, and it is the whole reason the part exists: the joint's tensile capacity becomes limited by the rod itself rather than by thread stripping in the nut. The collected table also carries the source's Note 1 on the optional inspection hole: on long couplings, installers cannot see whether each rod reached the middle, so the standard recommends a small drilled hole (0.2–0.4 x nominal diameter, or 1 in on sizes 2 3/4 and up) at mid-thickness as a visual check aid — orderable, but nuts come without it unless specified. Two quoting details: match the nut grade to the rod grade, since the coupling carries the full splice tension; and check the F column wrench sizes by row — the ladder is printed, not assumed from the nominal.

What is the MOQ and lead time for this nut type?

The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common sizes in this nut type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

What is the MOQ and lead time for ASME B18.2.2 Hex Coupling Nuts (Inch Series)?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for ASME B18.2.2 Hex Coupling Nuts (Inch Series) state?

State the full designation (ASME B18.2.2), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ASME B18.2.2 Hex Coupling Nuts (Inch Series) inquiry

  • ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
  • ✓ State the nut property class or material and the bolt class/material it must be paired with.
  • ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
  • ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
  • ✓ Factory-direct pricing for your ASME B18.2.2 Hex Coupling Nuts (Inch Series)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.