ISO 4035 Hex Thin Nuts (Chamfered)

ISO 4035 hex thin nuts, chamfered — the reduced-height metric hex nut, M1.6 to M64 — with the full collected 29-size table: pitch, countersink and bearing-face diameters, nut height, effective bearing height, and across-flats tolerances.

Last updated: 2026-11

Request a Quote

ISO 4035 Hex Thin Nuts (Chamfered) in an industrial setting
Illustrative image redrawn from real ISO 4035 Hex Thin Nuts (Chamfered) product references — not a photograph of stocked items.

Specifications

ISO 4035 is the thin chamfered hex nut: the same across-flats series as ISO 4032 in a height of roughly half the thread diameter. The reduced height buys clearance — on stud ends where full-height nuts would bottom out, on adjustments where a jam nut is backed against a working nut, and on long threaded rods where multiple nuts stack. The cost is engagement: the m w effective bearing height row in the table shows how little thread the thin form develops, which is why thin nuts are not the clamping nut in a strength-critical joint — they either lock against a full-height partner or work on short, low-load engagements. The collected table runs M1.6 to M64, the widest ladder of this batch. For the unchamfered jam-nut form and its inch-side pairing see the DIN 439 jam nut page; the DIN 985 nyloc page covers the insert-lock thin-height form. Property class and finish follow the drawing callout and are not part of the collected table.

Standard ISO 4035 — hexagon thin nuts (chamfered)
Series M1.6 – M64 (29 sizes tabulated)
Tabulated geometry Per size: pitch P, countersink d a, bearing face d w, across-corners e, nut height m (max/min), effective bearing height m w, across-flats s (max/min)
Nut form Thin height (≈ 0.5 × thread diameter), chamfered bearing faces
Family note Thin-height counterpart of ISO 4032; jam-nut role shares the DIN 439 page; across-flats series common with the standard-height nuts
Materials / strength Not tabulated by the collected specification — per RFQ (property class and finish per drawing callout)
ISO 4035 hex thin nuts (chamfered) - per-size dimensions (M1.6 - M64)All dimensions in millimeters. Attribute labels follow the source: P = thread pitch; d a = countersink diameter on the bearing face; d w = bearing face diameter; e = width across corners; m = nut height; m w = effective bearing height of the nut; s = width across flats. Materials, property classes and finishes are not tabulated by the collected specification.
Nominal threadP — Pitchd a — maxd a — mind w — mine — minm — maxm — minm w — mins — max=nominal sizes — min
M1.60.351.841.62.43.4110.750.63.23.02
M20.42.323.14.321.20.950.843.82
M2.50.452.92.54.15.451.61.351.154.82
M30.53.4534.66.011.81.551.25.55.32
(M3.5)0.643.55.16.5821.751.465.82
M40.74.645.97.662.21.951.676.78
M50.85.7556.98.792.72.45287.78
M616.7568.911.053.22.92.3109.78
M81.258.75811.614.3843.731312.73
M101.510.81014.617.7754.73.81615.73
M121.75131216.620.0365.74.61817.73
(M14)215.11419.623.3676.425.12120.67
M16217.31622.526.7587.425.92423.67
(M18)2.519.51824.929.5698.426.72726.16
M202.521.62027.732.95109.17.33029.16
(M22)2.523.72231.437.29119.97.93433
M24325.92433.239.551210.98.73635
(M27)329.1273845.213.512.49.94140
M303.532.43042.850.851513.911.14645
(M33)3.535.63346.655.3716.515.412.35049
M36438.93651.160.791816.913.55553.8
(M39)442.13955.966.4419.518.214.66058.8
M424.545.4426071.32119.715.86563.1
(M45)4.548.64564.776.9522.521.2177068.1
M48551.84869.582.62422.718.27573.1
(M52)556.25274.288.252624.719.88078.1
M565.560.55678.793.562826.721.48582.8
(M60)5.564.86083.499.213028.7239087.8
M64669.16488.2104.863230.424.39592.8

Materials

  • Material, property class and finish specified per RFQ — the collected specification table covers geometry only

Ordering & documentation

Documents

Shipments of ISO 4035 Hex Thin Nuts (Chamfered) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 4035 Hex Thin Nuts (Chamfered) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ISO 4035 Hex Thin Nuts (Chamfered)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for ISO 4035 Hex Thin Nuts (Chamfered): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for iso 4035 hex thin nuts (chamfered) is 10,000 pieces (applies to the standard sizes and finishes for iso 4035 hex thin nuts (chamfered); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for iso 4035 hex thin nuts (chamfered) run 3–7 days. Quantities or variants of iso 4035 hex thin nuts (chamfered) outside the standard range are confirmed at quotation.

Storage & shipping

ISO 4035 Hex Thin Nuts (Chamfered) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 4035 hex thin nuts (chamfered) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

When is a thin nut the right choice, and when must it not be the only nut?

Right choice: thread run-up on studs, jam-nut locking against a full-height nut, clearance-constrained assemblies, and position adjustment on threaded rods. Wrong choice: any joint where the thin nut alone carries the clamping load — its effective bearing height (m w in the table) develops only a fraction of the bolt's tensile strength before its threads strip. If the application needs locking without a partner nut, use a prevailing-torque form such as DIN 985 or DIN 980 instead of thinning down a plain nut.

What is the MOQ and lead time for this nut type?

The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common diameters in this nut type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

What is the MOQ and lead time for ISO 4035 Hex Thin Nuts (Chamfered)?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for ISO 4035 Hex Thin Nuts (Chamfered) state?

State the full designation (ISO 4035), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ISO 4035 Hex Thin Nuts (Chamfered) inquiry

  • ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
  • ✓ State the nut property class or material and the bolt class/material it must be paired with.
  • ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
  • ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
  • ✓ Factory-direct pricing for your ISO 4035 Hex Thin Nuts (Chamfered)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.