ASME B18.2.2 Heavy Hex Nuts

Heavy hex nuts per ASME B18.2.2 — the wide-body hex nut of the inch series, 1/4" through 4" nominal size, larger and thicker than a standard hex nut at the same thread size for heavy-duty and structural bolting. The standard partner for A325/A490 structural bolts.

Last updated: 2026-11

Request a Quote

ASME B18.2.2 Heavy Hex Nuts in an industrial setting
Illustrative image redrawn from real ASME B18.2.2 Heavy Hex Nuts product references — not a photograph of stocked items.

Specifications

The heavy hex nut is the wide-body counterpart of the ordinary hex nut in the inch series. At the same thread size it runs a larger width across flats and a thicker section — a 1/2" heavy hex nut spans 7/8" across flats at 31/64" basic thickness, against roughly 3/4" and a lighter section for the standard hex pattern — so it carries higher clamp loads and bears on more surface. That proportioning is why structural and heavy-duty bolting defaults to it: it is the standard partner for A325 and A490 structural bolts, and construction and engineering inspection practice expects the specification printed on the nut's top face. The size line runs from 1/4" up to 4" nominal thread size, with width across flats, width across corners and thickness tabulated basic, max and min for every step. Common supply is durable steels and stainless steels, plain, zinc-finished or hot-dip galvanized. Material grade is a separate decision — see the ASTM A563 grades page.

Standard ASME B18.2.2 — heavy hex nuts, inch series
Size range 1/4" – 4" nominal thread size
Dimensions at 1/2" Width across flats 7/8" basic (0.850–0.875 in); width across corners 0.969–1.010 in; thickness 31/64" basic (0.464–0.504 in)
Vs standard hex Larger and thicker than a standard hex nut at the same size — 1/2" hex runs 0.736–0.750 in across flats — for higher load and more bearing surface
Bolt pairing Standard partner for A325 / A490 structural bolts; grade chosen per the compatibility chart (A563 C/C3/D/DH/DH3, A194 2H)
Face marking Specification printed on the top face for construction and engineering inspection
Materials and finishes Durable steels and stainless steels; plain, zinc-finished or hot-dip galvanized
Typical use Structural connections, metal beams and girders, heavy-duty construction and engineering joints
ASME B18.2.2 heavy hex and heavy hex jam nuts (inch series) — per-size dimensions (1/4 – 4 in)All dimensions in inches. F = width across flats (basic, min/max); G = width across corners (min/max); H = heavy hex nut thickness (basic, min/max); H1 = heavy hex jam nut thickness (basic, min/max). Basic major diameter of thread per the UNC/UNF ladder of each size. The source splits its ladder into three column groups with repeated header blocks; groups are merged here and repeated headers are not reproduced as data. Property classes, proof loads and finishes are not tabulated by the collected specification.
Nominal SizeBasic Major Dia. of ThreadF — Across Flats (basic)F (min)F (max)G — Across Corners (min)G (max)H — Thickness (basic)H (min)H (max)H1 — Jam Thickness (basic)H1 (min)H1 (max)
1/40.25001/20.4880.5000.5560.57715/640.2180.25011/640.1560.188
5/160.31259/160.5460.5620.6220.65019/640.2800.31413/640.1860.220
3/80.375011/160.6690.6880.7630.79423/640.3410.37715/640.2160.252
7/160.43753/40.7280.7500.8300.86627/640.4030.44117/640.2470.285
1/20.50007/80.8500.8750.9691.01031/640.4640.50419/640.2770.317
9/160.562515/160.9090.9381.0371.08335/640.5260.56821/640.3070.349
5/80.62501 1/161.0311.0621.1751.22739/640.5870.63123/640.3370.381
3/40.75001 1/41.2121.2501.3821.44347/640.7100.75827/640.3980.446
7/80.87501 7/161.3941.4381.5891.66055/640.8330.88531/640.4580.510
11.00001 5/181.5751.6251.7961.87663/640.9561.01235/640.5190.575
1 1/81.12501 13/161.7561.8122.0022.0931 7/641.0791.13939/640.5790.639
1 1/41.250021.9382.0002.2092.3091 7/321.1871.25123/320.6870.751
1 3/81.37502 3/162.1192.1882.4162.5261 11/321.3101.37825/320.7470.815
1 1/21.50002 3/82.3002.3752.6222.7421 15/321.4331.50527/320.8080.880
1 5/81.62502 9/162.4812.5622.8282.9591 19/321.5561.63229/320.8680.944
1 3/41.75002 3/42.6622.7503.0353.1751 23/321.6791.75931/320.9291.009
1 7/81.87502 15/162.8442.9383.2423.3921 27/321.8021.8861 1/320.9891.073
22.00003 1/83.0253.1253.4493.6081 31/321.9252.0131 3/321.0501.138
2 1/42.25003 1/23.3883.5003.8624.0412 13/642.1552.2511 13/641.1551.251
2 1/22.50003 7/83.7503.8754.2754.4742 29/642.4012.5051 29/641.4011.505
2 3/42.75004 1/44.1124.2504.6884.9072 45/642.6472.7591 37/641.5221.634
33.00004 5/84.4754.6255.1025.3402 61/642.8933.0131 45/641.6431.763
3 1/43.250054.8385.0005.5155.7743 3/163.1243.2521 13/161.7481.876
3 1/23.50005 3/85.2005.3755.9286.2073 7/163.3703.5061 15/161.8702.006
3 3/43.75005 3/45.5625.7506.3416.6403 11/163.6163.7602 1/161.9902.134
44.00006 1/85.9256.1256.7557.0733 15/163.8624.0142 3/162.1122.264
  • Row 10 (1): The source prints the 1 in row's across-flats basic as "1 5/18" — read as 1 5/8 against its min/max cells (1.575–1.625).

Where this grade fits

The heavy hex body exists to match high-strength structural bolts: it is the standard partner for A325 and A490, with the grade chosen per the compatibility chart (A563 C/C3/D/DH/DH3 or A194 2H). Pairing rule in one line: the nut must develop the bolt's full proof load, so an upgraded bolt always pulls an upgraded nut with it.

Materials

  • Steel
  • Stainless steel
  • Hot-dip galvanized steel
  • Zinc-finished steel

Ordering & documentation

Documents

Shipments of ASME B18.2.2 Heavy Hex Nuts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ASME B18.2.2 Heavy Hex Nuts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ASME B18.2.2 Heavy Hex Nuts), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for ASME B18.2.2 Heavy Hex Nuts: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for asme b18.2.2 heavy hex nuts is 10,000 pieces (applies to the standard sizes and finishes for asme b18.2.2 heavy hex nuts; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for asme b18.2.2 heavy hex nuts run 3–7 days. Quantities or variants of asme b18.2.2 heavy hex nuts outside the standard range are confirmed at quotation.

Storage & shipping

ASME B18.2.2 Heavy Hex Nuts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store asme b18.2.2 heavy hex nuts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Heavy hex or standard hex nut — when does the heavy pattern matter?

Wherever the load or the inspection regime calls for it. The heavy hex pattern gives a wider wrench span and a thicker section at the same thread size, so it bears on more surface and carries the high clamp loads of structural and heavy-duty joints — which is why A325/A490 structural bolting pairs with heavy hex nuts rather than standard hex. The thicker body also suits hot-dip galvanized assemblies, where coating build-up eats into thread allowance. If the joint is a light-duty enclosure or bracket assembly, a standard hex nut is usually sufficient and cheaper.

Does "heavy hex" tell me the nut's strength grade?

No — ASME B18.2.2 fixes the geometry, not the material strength. Two 1/2" heavy hex nuts can be very different nuts depending on grade: an ASTM A563 Grade A general-purpose nut and a Grade DH structural nut share the same dimensions. That is why structural RFQs name both the pattern and the grade (for example "heavy hex nut, ASTM A563 Grade DH, 1"-8 UNC"). See the ASTM A563 grades page for what each grade delivers.

What is the MOQ and lead time for this nut type?

The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common diameters in this nut type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

What should an RFQ for this nut type state?

State the standard designation (ASME B18.2.2 heavy hex, with the ASTM A563 or A194 grade called out), nominal thread size and threads-per-inch series, material and finish (plain, zinc-plated, or hot-dip galvanized where compatible), any required certificates such as a mill test report per EN 10204 3.1, and quantity per size — plus destination country.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ASME B18.2.2 Heavy Hex Nuts inquiry

  • ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
  • ✓ State the nut property class or material and the bolt class/material it must be paired with.
  • ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
  • ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
  • ✓ Factory-direct pricing for your ASME B18.2.2 Heavy Hex Nuts
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.