SB001 Socket Countersunk Barrel Nuts
Internally threaded barrel nuts (sex bolts) with a socket countersunk head, M3–M16, barrels 4.5–22 mm with head diameters 6–30 mm as tabulated. Through-hole or blind-hole (closed) designs, sitting flush for a clean finished face.
Last updated: 2026-11
Specifications
The socket countersunk barrel nut is the flush-finish member of the barrel-nut (sex bolt) family: a female, internally threaded sleeve with a smooth barrel and a countersunk socket head that sits level with the surface once the mating socket countersunk screw is tightened. The collected tabulation spans M3 to M16 — head diameters from 6 mm at M3 up to 30 mm at M16, and barrel diameters from 4.5 mm to 22 mm — with tabulated lengths from 7 mm to 30 mm. Two construction variants exist: a through-hole barrel and a blind-hole (closed-end) barrel where the screw never exits the far face. The head-height row in the collected table is incomplete at some sizes; only the clean single values are carried here. Because nothing protrudes and no thread is cut into the clamped parts, the pairing suits furniture, enclosures, architectural panels and display work where both strength and appearance matter.
| Designation | SB001 — socket countersunk barrel nut (female, internally threaded sleeve; sex bolt half) |
|---|---|
| Thread range (tabulated) | M3, M4, M5, M6, M8, M10, M12, M16 |
| Head diameter dk per thread (mm) | M3 6 · M4 8 · M5 10 · M6 12 · M8 16 · M10 20 · M12 24 · M16 30 |
| Head height k (mm, clean cells) | M3 0.8 · M4 1.8 · M5 2.1 · M8 2.8 · M10 3.3 · M12 4.4 · M16 5.4 (M6 not rendered — source row ambiguous) |
| Barrel diameter d2 per thread (mm) | M3 4.5 · M4 5 · M5 6.5 · M6 8 · M8 11 · M10 14 · M12 16 · M16 22 |
| Lengths (tabulated ladder) | 7, 8, 9, 12, 15, 16, 20, 25, 27, 30 mm |
| Construction | Through-hole or blind-hole (closed end) designs |
| Materials / finishes (collected legend) | A1 stainless steel, A4 stainless steel, zinc-plated steel |
| Mating screw | Socket countersunk screw of the same thread; head sits flush in the countersink |
Materials
- A1 stainless steel
- A4 stainless steel
- Steel, zinc plated
Barrel-nut material choice tracks the joint's service rather than a nut-standard ladder: cross-dowel barrel nuts are commonly used in aerospace and ready-to-assemble furniture applications, and for furniture-grade stock the collected data shows high-quality steel for strength with zinc plating as standard for corrosion protection.
On this page the zinc-plated steel option is the cost-led furniture choice where the zinc coat is the entire corrosion budget; the A1 and A4 stainless options take over where wash-down, humidity or a visible finished face would soon breach a plated barrel.
For genuinely corrosive service, prefer the A4 row: the molybdenum in 316-class steel greatly improves resistance to chloride corrosion, which matters in a barrel nut because its thread is hidden inside the barrel where the first visible sign of attack is a loose joint.
Ordering & documentation
Documents
Shipments of SB001 Socket Countersunk Barrel Nuts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for SB001 Socket Countersunk Barrel Nuts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (SB001 Socket Countersunk Barrel Nuts), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for SB001 Socket Countersunk Barrel Nuts: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for sb001 socket countersunk barrel nuts is 10,000 pieces (applies to the standard sizes and finishes for sb001 socket countersunk barrel nuts; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for sb001 socket countersunk barrel nuts run 3–7 days. Quantities or variants of sb001 socket countersunk barrel nuts outside the standard range are confirmed at quotation.
Storage & shipping
SB001 Socket Countersunk Barrel Nuts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store sb001 socket countersunk barrel nuts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
When is a countersunk barrel nut the right sex bolt half?
When the joint face must stay flush. The countersunk head recesses into the surface and the socket countersunk screw closes it off level, so nothing snags or shows — the reason this pattern shows up on furniture, architectural panelling, enclosures and display fixtures. Choose the blind-hole variant when the screw must never protrude through the far face; the through-hole variant suits sandwiched panels where a slight exit is acceptable.
Why do some head-height values not appear for this barrel nut?
The collected tabulation carries an ambiguous head-height cell at M6, and we render only values we can attribute to a single size with confidence. Every other dimension on the page — head diameter, barrel diameter, thread range and the length ladder — is complete from the same source. State the thread and overall length on the RFQ and the exact head height is confirmed on the drawing at quotation.
What is the MOQ and lead time for this nut type?
The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common diameters in this nut type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.
What should an RFQ for this nut type state?
State the designation (for example the barrel-nut SKU and head style), nominal thread size and pitch, overall barrel length or grip, material and finish (plain, zinc, or stainless where compatible), whether a through-hole or blind (closed) end barrel is required, the mating screw specification, required certificates, and quantity per size — plus destination country.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your SB001 Socket Countersunk Barrel Nuts inquiry
- ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
- ✓ State the nut property class or material and the bolt class/material it must be paired with.
- ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
- ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
- ✓ Factory-direct pricing for your SB001 Socket Countersunk Barrel Nuts
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support