ASME B18.6.9 Wing Nuts — Type C, Style 3 (Inch)

The larger size range of the ASME B18.6.9 (R2017) Type C inch wing-nut pattern, tabulated per nominal size with width across flats, shoulder diameter, wing height, wing thickness and wing span — the heavy finger-tightened fixing where the added shoulder and wing-height columns define the larger envelope.

Last updated: 2026-11

Request a Quote

ASME B18.6.9 Wing Nuts — Type C, Style 3 (Inch) in an industrial setting
Illustrative image redrawn from real ASME B18.6.9 Wing Nuts — Type C, Style 3 (Inch) product references — not a photograph of stocked items.

Specifications

ASME B18.6.9 splits its Type C wing nut across styles by size range, and Style 3 is the larger ladder: same fine, defined-corner pattern as Style 1, scaled into diameters where the nut stops being a convenience item and becomes load-bearing hand hardware — formwork, tooling fixtures, valve hand-trims, jigs that are adjusted daily by hand. The standard's Style 3 table adds columns the small sizes do not carry: shoulder diameter (the unthreaded bearing step under the wing), wing height, and wing span — the overall tip-to-tip reach that decides whether a gloved or crowded hand can actually turn the nut in situ. That is the practical difference when specifying at the large end: on small wing nuts the wing projection suffices, but a Style 3 purchase usually starts from the span and wing height that fit the operator's access, then confirms width across flats and shoulder diameter against the mating thread and clearance hole. As with Style 1, only the B18.6.9-attributed table pins these five dimensions to a defined pattern; unattributed inch charts mix forms and leave the buyer to discover the difference at assembly. Both styles are on this site with their tables' column sets stated, so a mixed inch order can cite the same standard for both size ranges.

Standard ASME B18.6.9 (R2017) — wing nuts, inch series; Type C, Style 3 pattern
Type / style Type C — fine pattern with defined wing corners; Style 3 = larger size range of the type
Tabulated dimensions Per nominal size: width across flats, shoulder diameter, wing height, wing thickness, wing span
Series Inch; nominal sizes per the standard's Style 3 table
Companion page Type C Style 1 covers the smaller size range of the same pattern (separate page)

Materials

  • Steel, stainless steel — grade and finish confirmed at quotation (tenant supply range)

Ordering & documentation

Documents

Shipments of ASME B18.6.9 Wing Nuts — Type C, Style 3 (Inch) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ASME B18.6.9 Wing Nuts — Type C, Style 3 (Inch) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ASME B18.6.9 Wing Nuts — Type C, Style 3 (Inch)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for ASME B18.6.9 Wing Nuts — Type C, Style 3 (Inch): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for asme b18.6.9 wing nuts — type c, style 3 (inch) is 10,000 pieces (applies to the standard sizes and finishes for asme b18.6.9 wing nuts — type c, style 3 (inch); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for asme b18.6.9 wing nuts — type c, style 3 (inch) run 3–7 days. Quantities or variants of asme b18.6.9 wing nuts — type c, style 3 (inch) outside the standard range are confirmed at quotation.

Storage & shipping

ASME B18.6.9 Wing Nuts — Type C, Style 3 (Inch) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store asme b18.6.9 wing nuts — type c, style 3 (inch) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Style 1 or Style 3 for a given thread size?

Follow the standard's own split — the two styles divide the Type C size range between them, and a thread size falls in one table or the other, not both. The practical check at the boundary is envelope: Style 3's table carries shoulder diameter, wing height and wing span because the larger nuts are specified by the room they occupy as much as by their thread. Quote the style with the size so both sides read the same table.

What should an RFQ for Type C Style 3 wing nuts state?

Nominal size in the inch series, the pattern callout (ASME B18.6.9 Type C, Style 3), material and finish for the environment, quantity, and any certificate requirement — plus wing span or wing height if operator access constrains the envelope. Per-size dimensions from the standard's table are confirmed with the quotation.

What is the MOQ and lead time for this nut type?

The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Confirm the exact schedule against quantity and size mix at quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ASME B18.6.9 Wing Nuts — Type C, Style 3 (Inch) inquiry

  • ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
  • ✓ State the nut property class or material and the bolt class/material it must be paired with.
  • ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
  • ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
  • ✓ Factory-direct pricing for your ASME B18.6.9 Wing Nuts — Type C, Style 3 (Inch)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.