DIN 508 T-Slot Nuts

DIN 508 T-slot nuts, M4 to M48 — the tongue nut that drops into a machine table's T-slot and turns it into a clamping point — with the full collected 13-size table: pitch, tongue width, width across flats, height, matching T-slot size and the source's reference mass.

Last updated: 2026-11

Request a Quote

DIN 508 T-Slot Nuts in an industrial setting
Illustrative image redrawn from real DIN 508 T-Slot Nuts product references — not a photograph of stocked items.

Specifications

Every machine table with T-slots takes its clamping hardware from DIN 508: a nut whose lower half is a tongue sized to slide into the slot, and whose upper half is a standard metric thread for the stud or clamp screw. Drop it in, twist 90 degrees so the tongue sits across the slot, and the table becomes a fixturing grid. The collected table covers M4 to M48 — 13 sizes — with thread pitch P, the tongue width a (Nominal Size / max / min), width across flats s, tongue offset f, nut height h, key height k, the matching T-slot width per DIN 650, and the source's reference mass per 1000 units. That DIN 650 column is the sizing rule: the nut's tongue is chosen to fit the table's slot, and the thread follows the clamp hardware. Materials and property classes are not printed by the collected specification and stay per RFQ. For the washer side of the clamping kit see DIN 6340 on this site.

Standard DIN 508 — T-slot nuts (for machine tool tables per DIN 650 slots)
Series M4 – M48 (13 sizes tabulated); each size keyed to its matching DIN 650 T-slot width
Tabulated geometry Per size: pitch P, tongue width a (Nominal Size / max / min), across flats s (max / min), tongue offset f, height h, key height k (max / min), matching T-slot per DIN 650, reference mass per 1000 units ≈ kg
Function Tongue seats in the T-slot; standard metric thread above accepts studs, clamps and straps
Materials / strength Not tabulated by the collected specification — per RFQ (property class per clamping load)
DIN 508 T-slot nuts - per-size dimensions (M4 - M48)All dimensions in millimeters. Attribute labels follow the source: P = thread pitch; a = tongue width (Nominal Size / max / min); s = width across flats (max / min); f = tongue offset; h = nut height; k = key height (max / min); for T-slots according to DIN 650 = the matching T-slot size; the mass row header carries a ≈ qualifier reproduced verbatim, per 1000 units≈kg is the source's reference mass. Materials and property classes are not tabulated by the collected specification.
Screw Thread dP — Pitcha — Nominal Sizea — maxa — mins — maxs — minfhk — maxk — minfor T-slots according to DIN 650per 1000 units≈kg
M40.754.74.598.516.532.752.5
M50.865.75.5109.51.6843.564
M6187.77.51312.51.61065.5810
M81.25109.79.51514.51.61265.51018
M101.51211.711.41817.52.51476.51224
M121.751413.713.42221.52.51687.51435
M1621817.717.42827.52.520109.51875
M202.52221.721.43534.52.5281413.522165
M2432827.727.44443436181728345
M303.53635.635.35453644222136770
M3644241.641.365646522625421030
M424.54847.647.375746603029481550
M4855453.653.285846703433542300

Materials

  • Material and property class specified per RFQ — confirm against clamping load at quotation

Ordering & documentation

Documents

Shipments of DIN 508 T-Slot Nuts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 508 T-Slot Nuts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 508 T-Slot Nuts), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for DIN 508 T-Slot Nuts: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for din 508 t-slot nuts is 10,000 pieces (applies to the standard sizes and finishes for din 508 t-slot nuts; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 508 t-slot nuts run 3–7 days. Quantities or variants of din 508 t-slot nuts outside the standard range are confirmed at quotation.

Storage & shipping

DIN 508 T-Slot Nuts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 508 t-slot nuts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

How do I pick the right T-slot nut for my machine table?

Start from the slot, not the thread. Measure the T-slot's nominal width and find that figure in the tabulated "for T-slots according to DIN 650" column — the tongue width a is cut to fit that slot with the right slide clearance. The thread above the tongue is then whatever your clamping stud runs: the same slot takes different thread sizes as the clamping duty grows, which is why the table lists both per size. Check the nut height h against your strap or clamp so the thread engagement stays full when the clamp bottoms out.

What is the MOQ and lead time for this nut type?

The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common diameters in this nut type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

What is the MOQ and lead time for DIN 508 T-Slot Nuts?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for DIN 508 T-Slot Nuts state?

State the full designation (DIN 508), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 508 T-Slot Nuts inquiry

  • ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
  • ✓ State the nut property class or material and the bolt class/material it must be paired with.
  • ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
  • ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
  • ✓ Factory-direct pricing for your DIN 508 T-Slot Nuts
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.