DIN 986 Hex Domed Cap Nuts with Non-Metallic Insert
DIN 986 hexagon domed cap nuts with non-metallic nylon insert, M4 to M20 — the acorn nut that locks by prevailing torque and closes the bolt end under a domed cover, with the collected per-size tables: pitches, d a, d w, e, h 1, h 2, m, m w, r and s.
Last updated: 2026-11
Specifications
DIN 986 is the domed cap nut with a lock built in: the classic acorn silhouette — a hex driving section, a cylindrical skirt and a domed cover that closes off the bolt end — combined with a non-metallic nylon collar, so the same prevailing-torque grip that keeps the nut on also removes the need for a separate lock washer under a cap. That combination matters where the exposed thread end is itself the problem: guarding requirements (no cut thread projecting past a nut), product-safety housings, food and conveyor equipment where an open thread collects debris, and appearance hardware. The dome costs height — the collected tables split the height into the threaded section h 1 and the overall domed height h 2 (e.g. 9.6 mm total at M4 against 35 mm at M20) with the domed radius r per size — so check the stack budget first. The tables run M4 to M20 with pitch options, d a, d w, e, h 1, h 2, m, m w, r and s, plus the source mass rows printed verbatim. Insert temperature limits, finishes and the thread run-out inside the dome are not printed by the collected specification and stay per RFQ.
| Standard | DIN 986 — hexagon domed cap nuts with non-metallic insert (locking acorn nuts) |
|---|---|
| Series | M4 – M20 (three source column groups; coarse and fine pitch options tabulated per size) |
| Tabulated geometry | Per size: pitch (coarse / Fine thread 1/2 as printed), d a, d w (min), e (min, 7.66–32.95 mm), h 1 threaded height (5.6–21 mm), h 2 overall domed height (9.6–35 mm), m (min), m w (min), domed radius r (2.5–10.8 mm), s (7–30 mm), source mass per 1000 units ≈ kg |
| Locking mechanism | Nylon collar prevailing torque — the cap locks itself; no separate lock washer under the skirt |
| Insert temp limit / finishes | Not tabulated by the collected specification — per RFQ (state duty temperature at quotation) |
| Attribute | M4 | M5 | M6 |
|---|---|---|---|
| P — Pitch — Pitch(Coarse thread) | 0.7 | 0.8 | 1 |
| Fine thread 1 | / | / | / |
| Fine thread 2 | / | / | / |
| d a — min | 4 | 5 | 6 |
| max | 4.6 | 5.75 | 6.75 |
| d w — min | 5.9 | 6.9 | 8.9 |
| e — min | 7.66 | 8.79 | 11.05 |
| h 1 — Nominal Size | 5.6 | 6 | 7.5 |
| max | 5.85 | 6.25 | 7.85 |
| min | 5.35 | 5.75 | 7.15 |
| h 2 — Nominal Size | 9.6 | 10.5 | 12 |
| max | 9.9 | 10.85 | 12.35 |
| min | 9.3 | 10.15 | 11.65 |
| m — min | 2.9 | 4.4 | 4.9 |
| m w — min | 2.32 | 3.52 | 3.92 |
| r — max=nominal size | 2.5 | 3 | 3.5 |
| max | 2.7 | 3.5 | 4 |
| min | 2.3 | 2.5 | 3 |
| s — max=nominal size | 7 | 8 | 10 |
| min | 6.78 | 7.78 | 9.78 |
| per 1000 units ≈ kg | 1.4 | 1.55 | 3.3 |
| Attribute | M8 | M10 | M12 |
|---|---|---|---|
| P — Pitch — Pitch(Coarse thread) | 1.25 | 1.5 | 1.75 |
| Fine thread 1 | 1 | 1 | 1.5 |
| Fine thread 2 | / | 1.25 | 1.25 |
| d a — min | 8 | 10 | 12 |
| max | 8.75 | 10.8 | 13 |
| d w — min | 11.6 | 14.6 | 16.6 |
| e — min | 14.38 | 17.77 | 20.03 |
| h 1 — Nominal Size | 8.9 | 10.5 | 13.5 |
| max | 9.25 | 10.9 | 13.9 |
| min | 8.55 | 10.1 | 13.1 |
| h 2 — Nominal Size | 14 | 18.1 | 22.5 |
| max | 14.35 | 18.5 | 22.9 |
| min | 13.65 | 17.7 | 22.1 |
| m — min | 6.44 | 8.04 | 10.37 |
| m w — min | 5.15 | 6.43 | 8.3 |
| r — max=nominal size | 4.6 | 5.8 | 6.8 |
| max | 5.1 | 6.3 | 7.8 |
| min | 4.1 | 5.3 | 5.8 |
| s — max=nominal size | 13 | 16 | 18 |
| min | 12.73 | 15.73 | 17.73 |
| per 1000 units ≈ kg | 5.3 | 10.1 | 18.3 |
| Attribute | M14 | M16 | M20 |
|---|---|---|---|
| P — Pitch — Pitch(Coarse thread) | 2 | 2 | 2.5 |
| Fine thread 1 | 1.5 | 1.5 | 2 |
| Fine thread 2 | / | / | 1.5 |
| d a — min | 14 | 16 | 20 |
| max | 15.1 | 17.3 | 21.6 |
| d w — min | 19.6 | 22.5 | 27.7 |
| e — min | 23.35 | 26.75 | 32.95 |
| h 1 — Nominal Size | 15.5 | 16.5 | 21 |
| max | 15.9 | 16.9 | 21.5 |
| min | 15.1 | 16.1 | 20.5 |
| h 2 — Nominal Size | 26.4 | 27.5 | 35 |
| max | 26.8 | 27.9 | 35.5 |
| min | 26 | 27.1 | 34.5 |
| m — min | 12.1 | 14.1 | 16.9 |
| m w — min | 9.68 | 11.28 | 13.52 |
| r — max=nominal size | 7.8 | 8.8 | 10.8 |
| max | 8.8 | 9.8 | 11.8 |
| min | 6.8 | 7.8 | 9.8 |
| s — max=nominal size | 21 | 24 | 30 |
| min | 20.67 | 23.67 | 29.16 |
| per 1000 units ≈ kg | 26.1 | 37.1 | 111 |
Materials
- Body material and finish specified per RFQ; insert is non-metallic (nylon) per the standard — confirm duty temperature at quotation
Ordering & documentation
Documents
Shipments of DIN 986 Hex Domed Cap Nuts with Non-Metallic Insert are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 986 Hex Domed Cap Nuts with Non-Metallic Insert orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 986 Hex Domed Cap Nuts with Non-Metallic Insert), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for DIN 986 Hex Domed Cap Nuts with Non-Metallic Insert: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for din 986 hex domed cap nuts with non-metallic insert is 10,000 pieces (applies to the standard sizes and finishes for din 986 hex domed cap nuts with non-metallic insert; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 986 hex domed cap nuts with non-metallic insert run 3–7 days. Quantities or variants of din 986 hex domed cap nuts with non-metallic insert outside the standard range are confirmed at quotation.
Storage & shipping
DIN 986 Hex Domed Cap Nuts with Non-Metallic Insert are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 986 hex domed cap nuts with non-metallic insert dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
When does a DIN 986 cap nut replace a plain nut plus cover detail?
When the exposed thread end needs to disappear and the joint still needs a lock. A plain acorn nut closes the bolt end but offers nothing against back-off; a nylon-insert lock nut locks but leaves thread and load faces exposed. DIN 986 is both in one part: the collected tables carry the prevailing-torque geometry (m w per size, the nylon collar at the thread) together with the domed cover dimensions (h 2, domed radius r), so guarding, hygiene and appearance requirements are met without stacking two parts — and the dome itself adds height (h 2 is roughly double the threaded height h 1 per size), so verify the stack and the bolt projection: the thread must end inside the dome. If your duty temperature runs past the nylon collar's range, say so at RFQ — a high-temperature joint needs an all-metal lock, not this part.
What is the MOQ and lead time for this nut type?
The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common sizes in this nut type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.
What is the MOQ and lead time for DIN 986 Hex Domed Cap Nuts with Non-Metallic Insert?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for DIN 986 Hex Domed Cap Nuts with Non-Metallic Insert state?
State the full designation (DIN 986), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 986 Hex Domed Cap Nuts with Non-Metallic Insert inquiry
- ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
- ✓ State the nut property class or material and the bolt class/material it must be paired with.
- ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
- ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
- ✓ Factory-direct pricing for your DIN 986 Hex Domed Cap Nuts with Non-Metallic Insert
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support