ASME B18.2.2 Hex Flange Nuts (Inch Series)

ASME B18.2.2 hex flange nuts, inch series No. 6 – 3/4 in (regular) and 1/4 – 5/8 in (large pattern) — the hex nut with an integrated bearing flange, with the collected per-size tables: width across flats and corners, flange diameter, thickness, wrenching length and flange thickness.

Last updated: 2026-11

Request a Quote

ASME B18.2.2 Hex Flange Nuts (Inch Series) in an industrial setting
Illustrative image redrawn from real ASME B18.2.2 Hex Flange Nuts (Inch Series) product references — not a photograph of stocked items.

Specifications

The hex flange nut builds the washer into the nut: a flange integral to one face spreads the clamping load over a larger bearing circle, so a single part does the job of a hex nut plus a separate washer — fewer components to assemble, and a bearing surface that cannot be forgotten or installed backwards. The collected tables cover both patterns ASME B18.2.2 prints for the inch series. The regular pattern runs No. 6 through 3/4 in; the large pattern runs 1/4 through 5/8 in and trades a bigger flange diameter and wrenching length for the same thread size — compare 1/2 in: regular flange diameter 1.000–1.031 in versus 1.175–1.205 in large, which is the difference between a flange sized for general hardware and one sized for heavier bearing on softer base material. Both tables carry per size: width across flats F (min/max), across corners G (min/max), flange diameter B (min/max), thickness H (min/max), wrenching length J (min) and flange thickness K (min). The reading detail that matters at assembly: the wrench rides on the hex (F column), not the flange — J gives the wrenching length along the hex flats. Property classes, finishes and the matching flange bolt-head dimensions are not tabulated by the collected specification — per RFQ.

Standard ASME B18.2.2-2010 — square and hex nuts, inch series (hex flange nut: hex nut with an integral flange bearing face; regular and large patterns both tabulated)
Size range Regular pattern: No. 6 – 3/4 in, twelve sizes; large pattern: 1/4 – 5/8 in, seven sizes; machine screw sizes No. 6 – 12 appear only in the regular table, numbered and fractional sizes overlap from 1/4
Tabulated geometry Per size: basic major dia. of thread, width across flats F (min/max), across corners G (min/max), flange dia. B (min/max), thickness H (min/max), wrenching length J (min), flange thickness K (min) — e.g. regular 3/8: F 0.551–0.562, B 0.728–0.750, H 0.330–0.347
Pattern comparison Large pattern at the same thread: flange dia. B and wrenching length J step up (1/2 in: B 1.175–1.205 vs 1.000–1.031 regular; J 0.29 vs 0.31 K reading per table) — sized for heavier bearing, not a different thread
Threads / classes / finishes Not tabulated by the collected specification — per RFQ (state thread series, grade and finish at quotation)
ASME B18.2.2 hex flange nuts (inch series) — regular pattern, per-size dimensions (No. 6 – 3/4 in)All dimensions in inches. F = width across flats (min/max); G = width across corners (min/max); B = flange diameter (min/max); H = nut thickness (min/max); J = wrenching length (min); K = flange thickness (min). Basic major diameter of thread per the UNC/UNF ladder of each size. The source's sub-header labels the J and K columns with a repeated "min" and a bare label respectively; labels are reproduced as printed. Threads, property classes and finishes are not tabulated by the collected specification.
Nominal SizeBasic Major Dia. of ThreadF — Across Flats (min)F (max)G — Across Corners (min)G (max)B — Flange Dia. (min)B (max)H — Thickness (min)H (max)J — Wrenching Length (min)K — Flange Thickness (min)
No.60.13800.3020.3120.3420.3610.4060.4220.1560.1710.100.02
80.16400.3340.3440.3810.3970.4520.4690.1870.2030.130.02
100.19000.3650.3750.4160.4330.4800.5000.2030.2190.130.03
120.21600.4280.4380.4880.5050.5740.5940.2220.2360.140.04
1/40.25000.4280.4380.4880.5050.5740.5940.2220.2360.140.04
5/160.31250.4890.5000.5570.5770.6600.6800.2680.2830.170.04
3/80.37500.5510.5620.6280.6500.7280.7500.3300.3470.230.04
7/160.43750.6750.6880.7680.7940.9100.9370.3750.3950.260.04
1/20.50000.7360.7500.8400.8661.0001.0310.4370.4580.310.05
9/160.56250.8610.8750.9821.0101.1551.1880.4830.5060.350.05
5/80.62500.9220.9381.0511.0831.2481.2810.5450.5690.400.05
3/40.75001.0881.1251.2401.2991.4601.5000.6270.6750.460.06
ASME B18.2.2 large hex flange nuts (inch series) — per-size dimensions (1/4 – 5/8 in)All dimensions in inches. Same column reading as the regular-pattern table; the large pattern carries a larger flange diameter and wrenching length at the same thread size. The source repeats the full header block before this group; the repeated header is not reproduced as data. Threads, property classes and finishes are not tabulated by the collected specification.
Nominal SizeBasic Major Dia. of ThreadF — Across Flats (min)F (max)G — Across Corners (min)G (max)B — Flange Dia. (min)B (max)H — Thickness (min)H (max)J — Wrenching Length (min)K — Flange Thickness (min)
1/40.25000.4280.4380.4880.5050.7000.7280.2810.3120.150.04
5/160.31250.4890.5000.5570.5770.7900.8200.3430.3750.200.04
3/80.37500.5510.5620.6280.6500.8850.9150.3900.4060.240.04
7/160.43750.6750.6880.7680.7941.1001.1310.4370.4680.260.04
1/20.50000.7360.7500.8400.8661.1751.2050.4850.5150.290.06
9/160.56250.8610.8750.9821.0101.2601.3000.5460.5780.370.06
5/80.62500.9220.9381.0511.0831.2801.3600.6000.6400.420.06

Materials

  • Material, property class and finish specified per RFQ — the flange bears directly on the mating surface, so coating build-up that would sit under a separate washer now rides on the flange; state the plating at quotation

Ordering & documentation

Documents

Shipments of ASME B18.2.2 Hex Flange Nuts (Inch Series) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ASME B18.2.2 Hex Flange Nuts (Inch Series) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ASME B18.2.2 Hex Flange Nuts (Inch Series)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for ASME B18.2.2 Hex Flange Nuts (Inch Series): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for asme b18.2.2 hex flange nuts (inch series) is 10,000 pieces (applies to the standard sizes and finishes for asme b18.2.2 hex flange nuts (inch series); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for asme b18.2.2 hex flange nuts (inch series) run 3–7 days. Quantities or variants of asme b18.2.2 hex flange nuts (inch series) outside the standard range are confirmed at quotation.

Storage & shipping

ASME B18.2.2 Hex Flange Nuts (Inch Series) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store asme b18.2.2 hex flange nuts (inch series) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

When does the flange nut beat a hex nut plus washer, and which pattern do I quote?

Read the two tables against each other. The flange earns its place when the joint is assembled in volume or the base material is soft: one part instead of two removes an assembly step and a failure mode (the washer left out), and the integral flange cannot rake or dig the way a small hex face can on aluminum or sheet. The collected tables give the decision numbers. First, bearing circle: the B column — a regular 1/4 in flange nut bears on 0.574–0.594 in diameter; the large pattern at the same thread bears on 0.700–0.728 in. If the mating hole is oversized or the base material is thin, the larger B is the argument. Second, clearance: the larger flange needs room — check that adjacent walls, bolt heads or moving parts clear the B diameter, because the flange is not optional the way a washer is. Third, wrench access: the F column still sizes the wrench (1/2 in nut: 0.736–0.750 across flats), and J gives the wrenching length along the hex. Quoting rules: name the pattern explicitly (regular or large) since both exist at overlapping sizes, state the thread series, and note the finish — the flange face is a bearing surface, so heavy hot-dip galvanizing changes the effective fit and is worth flagging at quotation rather than discovering at assembly.

What is the MOQ and lead time for this nut type?

The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common sizes in this nut type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

What is the MOQ and lead time for ASME B18.2.2 Hex Flange Nuts (Inch Series)?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for ASME B18.2.2 Hex Flange Nuts (Inch Series) state?

State the full designation (ASME B18.2.2), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ASME B18.2.2 Hex Flange Nuts (Inch Series) inquiry

  • ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
  • ✓ State the nut property class or material and the bolt class/material it must be paired with.
  • ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
  • ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
  • ✓ Factory-direct pricing for your ASME B18.2.2 Hex Flange Nuts (Inch Series)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.