DIN 466 Knurled Nuts — High Type
DIN 466 knurled nuts, high type, M1 to M10 — the tall round thumb nut whose knurl is formed for grip, not machined for accuracy — with the collected per-size tables: pitch, body d k, d s, heights h/k, r and knurl division.
Last updated: 2026-11
Specifications
DIN 466 is the high-type knurled nut: a small cylindrical nut with a formed (pressed) knurl around the rim and an internal thread, tightened and released by hand. The knurl is a grip feature, not a precision one — which is why the standard lives on the small end of the thread range, M1 to M10 in the collected tables: optical benches, instrument panels, electrical terminals, antenna and microphone clamps, jig fixtures — anywhere a cover plate or a stop needs frequent finger adjustment without a spanner marking a hex. The collected tables print, per size: pitch P, the chamfer c, knurled-body diameter d k (nominal/max/min), d s, overall height h, knurl height k, r, the knurling division (knurl pitch, 0.5–0.8 mm across the range) and the source's mass-per-1000 figure. The source marks the size column ③ and some c cells ① with no legend — reproduced verbatim and disclosed. The low-type counterpart is the DIN 467 page on this site; materials and finishes are not tabulated by the collected specification and stay per RFQ.
| Standard | DIN 466 — knurled nuts, high type (hand-tightened round nuts with formed knurl) |
|---|---|
| Series | M1 – M10 (four source column groups) |
| Tabulated geometry | Per size: pitch P, chamfer c (≈, some cells printed ①), body d k (nominal/max/min), d s, height h, knurl height k, r, knurling division (0.5–0.8 mm), mass per 1000 ≈ kg |
| Function | Formed knurl gives fingers the torque — no tools, no marred surfaces on adjusted parts |
| Materials / finish | Not tabulated by the collected specification — per RFQ |
| Attribute | M1 | M1.2 | M1.4 |
|---|---|---|---|
| P — Pitch | 0.25 | 0.25 | 0.3 |
| c — ≈ | ① | ① | ① |
| d k — Nominal Size | 5.5 | 6 | 7 |
| d k — max | 5.74 | 6.24 | 7.29 |
| d k — min | 5.26 | 5.76 | 6.71 |
| d s — max=nominal size | 2.8 | 3 | 3.5 |
| d s — min | 2.55 | 2.75 | 3.2 |
| h — max=nominal size | 3.5 | 4 | 4.7 |
| h — min | 3.2 | 3.7 | 4.4 |
| k — max=nominal size | 1.5 | 1.5 | 2 |
| k — min | 1.25 | 1.25 | 1.75 |
| r | 0.5 | 0.5 | 0.5 |
| Knurling division | 0.5 | 0.5 | 0.5 |
| per 1000 units ≈ kg | 0.357 | 0.445 | 0.765 |
| Attribute | M1.6 | M2 | M2.5 |
|---|---|---|---|
| P — Pitch | 0.35 | 0.4 | 0.45 |
| c — ≈ | ① | ① | 0.3 |
| d k — Nominal Size | 7.5 | 9 | 11 |
| d k — max | 7.79 | 9.29 | 11.35 |
| d k — min | 7.21 | 8.71 | 10.65 |
| d s — max=nominal size | 3.8 | 4.5 | 5 |
| d s — min | 3.5 | 4.2 | 4.7 |
| h — max=nominal size | 5 | 5.3 | 6.5 |
| h — min | 4.7 | 5 | 6.14 |
| k — max=nominal size | 2 | 2 | 2.5 |
| k — min | 1.75 | 1.75 | 2.25 |
| r | 0.5 | 0.5 | 0.5 |
| Knurling division | 0.5 | 0.5 | 0.6 |
| per 1000 units ≈ kg | 0.9 | 1.3 | 2.2 |
| Attribute | M3 | M4 | M5 |
|---|---|---|---|
| P — Pitch | 0.5 | 0.7 | 0.8 |
| c — ≈ | 0.3 | 0.4 | 0.4 |
| d k — Nominal Size | 12 | 16 | 20 |
| d k — max | 12.35 | 16.35 | 20.42 |
| d k — min | 11.65 | 15.65 | 19.58 |
| d s — max=nominal size | 6 | 8 | 10 |
| d s — min | 5.7 | 7.64 | 9.64 |
| h — max=nominal size | 7.5 | 9.5 | 11.5 |
| h — min | 7.14 | 9.14 | 11.07 |
| k — max=nominal size | 2.5 | 3.5 | 4 |
| k — min | 2.25 | 3.2 | 3.7 |
| r | 0.5 | 0.5 | 1 |
| Knurling division | 0.6 | 0.6 | 0.6 |
| per 1000 units ≈ kg | 3 | 7.19 | 13 |
| Attribute | M6 | M8 | M10 |
|---|---|---|---|
| P — Pitch | 1 | 1.25 | 1.5 |
| c — ≈ | 0.5 | 0.6 | 0.8 |
| d k — Nominal Size | 24 | 30 | 36 |
| d k — max | 24.42 | 30.42 | 36.5 |
| d k — min | 23.58 | 29.58 | 35.5 |
| d s — max=nominal size | 12 | 16 | 20 |
| d s — min | 11.57 | 15.57 | 19.48 |
| h — max=nominal size | 15 | 18 | 23 |
| h — min | 14.57 | 17.57 | 22.48 |
| k — max=nominal size | 5 | 6 | 8 |
| k — min | 4.7 | 5.7 | 7.64 |
| r | 1 | 2 | 2 |
| Knurling division | 0.6 | 0.6 | 0.8 |
| per 1000 units ≈ kg | 24 | 46 | 88 |
Materials
- Material and finish specified per RFQ — brass and steel are the usual small-nut options; confirm at quotation
Ordering & documentation
Documents
Shipments of DIN 466 Knurled Nuts — High Type are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 466 Knurled Nuts — High Type orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 466 Knurled Nuts — High Type), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for DIN 466 Knurled Nuts — High Type: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for din 466 knurled nuts — high type is 10,000 pieces (applies to the standard sizes and finishes for din 466 knurled nuts — high type; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 466 knurled nuts — high type run 3–7 days. Quantities or variants of din 466 knurled nuts — high type outside the standard range are confirmed at quotation.
Storage & shipping
DIN 466 Knurled Nuts — High Type are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 466 knurled nuts — high type dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
DIN 466 or DIN 467 for a hand-adjusted assembly?
By the torque you need to hold. Both are the same knurled-round form on the same thread range — the collected tables show identical body diameters d k per size — but DIN 466 is the tall type (h runs 3.5 mm at M1 to 23 mm at M10) while DIN 467 is the low type (2 mm at M1 to 10 mm at M10). The taller nut gives fingers a longer lever and the thread more engagement, so it holds better against vibration and suits parts that are re-adjusted often; the low type sits flush where height is budgeted — under knobs, inside covers, on instrument front panels. If the nut must resist anything more than finger torque, neither is the answer: add a locknut or move to a hex nut with a washer, because a formed knurl will slip in a pliers-grip situation and the small threads will strip long before a hex would. Check the knurling-division column if the nut rotates visibly — the knurl pitch (0.5 mm at the small sizes, 0.8 at M10) sets the look of the rim.
What is the MOQ and lead time for this nut type?
The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common sizes in this nut type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.
What is the MOQ and lead time for DIN 466 Knurled Nuts — High Type?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for DIN 466 Knurled Nuts — High Type state?
State the full designation (DIN 466), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 466 Knurled Nuts — High Type inquiry
- ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
- ✓ State the nut property class or material and the bolt class/material it must be paired with.
- ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
- ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
- ✓ Factory-direct pricing for your DIN 466 Knurled Nuts — High Type
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support