DIN 562 Square Thin Nuts

DIN 562 square thin nuts, M1.6 to M10 — the low-profile four-flat nut for narrow jam nuts and insert work in small assemblies — with the collected per-size tables: pitch, across corners e, thickness m and across flats s.

Last updated: 2026-11

Request a Quote

DIN 562 Square Thin Nuts in an industrial setting
Illustrative image redrawn from real DIN 562 Square Thin Nuts product references — not a photograph of stocked items.

Specifications

DIN 562 is the square-section thin nut at the small end of the range, M1.6 to M10 in the collected tables: a quarter of the nut is a flat for a thin open-end spanner, and the reduced thickness m — 1 mm at M1.6 up to 5 mm at M10 — is what locknut and insert work wants. Two square thin nuts jammed on a stud lock each other; one run against a standard nut does the same; and in instrument and electrical assemblies the square section also stops rotation in a square hole or a punched recess without any separate anti-rotation feature. The collected tables print, per size: pitch P, across corners e (min), thickness m (max=nominal/min), across flats s (max=nominal/min) and the source's mass-per-1000 figure. The parenthesized (M3.5) is the non-preferred size as printed. Property classes, heat treatment and finishes are not tabulated by the collected specification and stay per RFQ.

Standard DIN 562 — square thin nuts (low-profile four-flat nuts, small metric series)
Series M1.6 – M10 (three source column groups; (M3.5) non-preferred as printed)
Tabulated geometry Per size: pitch P, across corners e (min, 4–20.2 mm), thickness m (max=nominal/min, 1–5 mm), across flats s (max=nominal/min, 3.2–16 mm), mass per 1000 ≈ kg
Function Jam/lock nut and square-recess insert work where height and rotation-stop both matter
Materials / strength Not tabulated by the collected specification — per RFQ
DIN 562 square thin nuts - per-size dimensions (M1.6 - M3)All dimensions in millimeters. Attribute labels follow the source: P = pitch; e = width across corners (min); m = nut thickness (max=nominal/min); s = width across flats (max=nominal/min). Heat treatment, materials and finishes are not tabulated by the collected specification.
AttributeM1.6M2M2.5M3
P — Pitch0.350.40.450.5
e — min456.37
m — max=nominal size11.21.61.8
m — min0.60.81.21.4
s — max=nominal size3.2455.5
s — min2.93.74.75.2
per 1000 units ≈ kg0.080.130.270.35
DIN 562 square thin nuts - per-size dimensions (M3.5 - M5)All dimensions in millimeters; the parenthesized (M3.5) is printed in brackets by the source (non-preferred size).
Attribute(M3.5)M4M5
P — Pitch0.60.70.8
e — min7.68.910.2
m — max=nominal size22.22.7
m — min1.61.82.3
s — max=nominal size678
s — min5.76.647.64
per 1000 units ≈ kg0.440.641.06
DIN 562 square thin nuts - per-size dimensions (M6 - M10)All dimensions in millimeters.
AttributeM6M8M10
P — Pitch11.251.5
e — min12.716.520.2
m — max=nominal size3.245
m — min2.723.524.52
s — max=nominal size101316
s — min9.6412.5715.57
per 1000 units ≈ kg1.934.017.6

Materials

  • Material and property class specified per RFQ — confirm against the mating stud at quotation

Ordering & documentation

Documents

Shipments of DIN 562 Square Thin Nuts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 562 Square Thin Nuts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 562 Square Thin Nuts), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for DIN 562 Square Thin Nuts: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for din 562 square thin nuts is 10,000 pieces (applies to the standard sizes and finishes for din 562 square thin nuts; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 562 square thin nuts run 3–7 days. Quantities or variants of din 562 square thin nuts outside the standard range are confirmed at quotation.

Storage & shipping

DIN 562 Square Thin Nuts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 562 square thin nuts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

When is a square thin nut the right locknut?

When two constraints meet: almost no height budget, and a need for the nut not to spin. As a jam nut, DIN 562 does what any thin nut does — tightened hard against a full nut (or paired with a second thin nut), the counter-loaded flanks lock the pair on a stud where a vibration-rated single nut would need more height than the design has. The square section then adds what a hex thin nut cannot: drop it into a square punched hole or a machined recess and the flats in the socket take the torque, so one wrench turn during assembly is all the nut ever needs — no spinning in the housing, no separate tab washer at the small sizes where tab washers get clumsy. Read the collected table's m column as your height cost (1.8 mm at M3, 4 mm at M8) and s as your wrench size, and note that thin nuts carry less thread engagement than a full nut: they lock joints, they do not carry the joint.

What is the MOQ and lead time for this nut type?

The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common sizes in this nut type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

What is the MOQ and lead time for DIN 562 Square Thin Nuts?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for DIN 562 Square Thin Nuts state?

State the full designation (DIN 562), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 562 Square Thin Nuts inquiry

  • ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
  • ✓ State the nut property class or material and the bolt class/material it must be paired with.
  • ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
  • ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
  • ✓ Factory-direct pricing for your DIN 562 Square Thin Nuts
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.