SB007 Socket Button Barrel Nuts
Socket button head barrel nuts (button head sleeve nuts) with hex recess heads, M5–M10 in zinc-plated steel. Tabulated heads 12–18 mm, bodies 8–9 mm, hex recesses 4–5 mm — power-drivable, cam-out-resistant, high-torque barrel fixings.
Last updated: 2026-11
Specifications
The socket button barrel nut hosts a hexagonal recess in a wide, low button head: driven with a hex wrench or insert bit, it resists cam-out and takes power-driver installation — the fastest barrel nut of the family to fit at volume. The collected tabulation runs M5 to M10 with head diameters 12–18 mm, body diameters 8–9 mm and 4–5 mm A/F hex recesses; it lists the parts per variant row rather than per thread, so each row carries its own clean combination of body, head, recess, length and engagement figures. Zinc-plated steel is the collected standard material, with other materials and finishes to order; an imperial diameter range exists in the same head style. The wide head also spreads the clamp load — useful on softer panel material — and the same button-head geometry suits furniture, fixtures and equipment frames where a flush-ish, snag-free head is wanted with real torque behind it.
| Designation | SB007 — socket button barrel nut (button head sleeve nut, hex recess head) |
|---|---|
| Thread range | M5, M6, M10 (M5–M10 series per source; tabulated rows below) |
| Reference row M5 (mm) | b 8.5 · dk 12 · ds 6.5 · k 2 · l 13 · s 4 |
| Reference row M6 (mm) | b 7 · dk 15 · ds 9 · k 3 · l 12 · s 5 |
| Head diameter dk (tabulated range, mm) | 12–18 |
| Body diameter ds (tabulated range, mm) | 8–9 |
| Hex recess A/F s (mm) | 4 (M5) · 5 (M6 and larger rows) |
| Tabulated length l / engagement b (mm) | l 10–18 · b 7–12 across rows |
| Material | Zinc-plated steel (collected standard); others to order |
| Drive | Hex wrench or insert bit; power-driver compatible, high cam-out resistance |
Materials
- Steel, zinc plated
The collected barrel-nut market splits stock by size as well as grade — M6 cross dowels are supplied in a zinc alloy for a cost-effective solution while M8 nuts are supplied in steel for additional strength — and this page's zinc-plated steel option follows the same logic: the steel barrel carries the load and the zinc coat is the corrosion budget.
Keep zinc-plated steel in indoor or dry service; when the fixture sees wash-down, weather or coastal air, the stainless grades on the materials legend become the honest choice, because a breached zinc coat on a barrel thread is invisible until the joint loosens.
Ordering & documentation
Documents
Shipments of SB007 Socket Button Barrel Nuts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for SB007 Socket Button Barrel Nuts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (SB007 Socket Button Barrel Nuts), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for SB007 Socket Button Barrel Nuts: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for sb007 socket button barrel nuts is 10,000 pieces (applies to the standard sizes and finishes for sb007 socket button barrel nuts; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for sb007 socket button barrel nuts run 3–7 days. Quantities or variants of sb007 socket button barrel nuts outside the standard range are confirmed at quotation.
Storage & shipping
SB007 Socket Button Barrel Nuts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store sb007 socket button barrel nuts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
Why choose a socket button barrel nut over other barrel nut styles?
Installation speed and torque. The hex recess plus wide button head lets a power driver seat the nut quickly without cam-out, and the large head diameter spreads the clamp load on softer panels — while staying low enough not to snag. If the joint is production-line work or the panel material is soft, this style beats slotted and countersunk barrel nuts on fit-rate; where the head must vanish completely, the domed or countersunk styles are the better look.
What is the MOQ and lead time for this nut type?
The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common diameters in this nut type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.
What should an RFQ for this nut type state?
State the designation (for example the barrel-nut SKU and head style), nominal thread size and pitch, overall barrel length or grip, material and finish (plain, zinc, or stainless where compatible), whether a through-hole or blind (closed) end barrel is required, the mating screw specification, required certificates, and quantity per size — plus destination country.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your SB007 Socket Button Barrel Nuts inquiry
- ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
- ✓ State the nut property class or material and the bolt class/material it must be paired with.
- ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
- ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
- ✓ Factory-direct pricing for your SB007 Socket Button Barrel Nuts
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support