4H02 Four-Hole Security Nuts
Four-hole spanner-drive security nuts with four location holes ringed by a slim circular groove, M6–M20 as tabulated — height A 5.5–17.1 mm, groove/feature depth B 1.5–5.2 mm. A2 stainless steel as standard; reusable two-way fixing for low-to-medium torque.
Last updated: 2026-11
Specifications
The four-hole security nut spreads the spanner-drive idea over four location holes in the face, surrounded by a slim circular groove: no hex flats, no slot, and no purchase for a standard tool. The collected tabulation runs M6 to M20 — the A dimension (nut height) stepping 5.5, 7.4, 9.3, 10.3, 13.8 and 17.1 mm across the six sizes, with the B dimension at 1.5 to 5.2 mm — every cell clean and complete. A2 stainless steel is the standard material, which is why the pattern appears on stainless architecture, balustrading and glass panels where the fastener must match its surroundings and survive weather. The nut is a reusable two-way fixing: the special driver installs and removes it freely, so it suits lower-security applications with maintenance access — the tamper-resistance comes from the missing grip, not from destruction. Like all shallow spanner drives it is a low-to-medium torque fixing; specify the joint accordingly.
| Designation | 4H02 — four-hole security nut; four location holes in the face ringed by a slim circular groove |
|---|---|
| Thread range (tabulated) | M6, M8, M10, M12, M16, M20 |
| Dimension A per thread (mm) | M6 5.50 · M8 7.4 · M10 9.3 · M12 10.3 · M16 13.8 · M20 17.1 |
| Dimension B per thread (mm) | M6 1.5 · M8 2.2 · M10 2.7 · M12 3.3 · M16 4.1 · M20 5.2 |
| Security principle | Four-hole spanner drive with special driver — reusable two-way fixing; tamper-resistance from the grip-less face |
| Torque class (source-stated) | Suitable for low-to-medium torque applications; requires a special driver tool to install and remove |
| Material (collected) | A2 stainless steel as standard; other sizes and materials as specials |
| Typical settings (source-stated) | Stainless architecture, balustrading, glass panels |
Materials
- A2 stainless steel
The A2 option on this four-hole pattern is the general-purpose stainless: property class A2-70 pairs approximately 700 MPa strength with 18-8 corrosion resistance, the grade for most outdoor applications where corrosion resistance matters more than maximum strength — a fit for permanent security fixings on public or exposed furniture where clamp loads are modest and weather is the enemy.
Assembly discipline for stainless-on-stainless: stainless threads can gall (cold-weld) when wound dry into matching stainless threads, so use lubricant or steady paced tightening rather than driving the joint dry. The four-hole drive still does the security work — the material decision is corrosion and galling behaviour, not tamper class.
Ordering & documentation
Documents
Shipments of 4H02 Four-Hole Security Nuts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for 4H02 Four-Hole Security Nuts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (4H02 Four-Hole Security Nuts), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for 4H02 Four-Hole Security Nuts: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for 4h02 four-hole security nuts is 10,000 pieces (applies to the standard sizes and finishes for 4h02 four-hole security nuts; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for 4h02 four-hole security nuts run 3–7 days. Quantities or variants of 4h02 four-hole security nuts outside the standard range are confirmed at quotation.
Storage & shipping
4H02 Four-Hole Security Nuts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store 4h02 four-hole security nuts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
Four holes instead of two — what changes in practice?
Driver engagement and aesthetics. Four location holes give the matching driver more contact points than a two-hole pattern, and the slim circular groove keeps the face visually clean — one reason the collected page places this nut on stainless architecture, balustrading and glass panels. The fixing remains reusable and two-way: maintenance crews reinstall it freely, while anyone with a standard spanner gets nothing to turn.
Which spanner-drive security nut should I pick for a given joint?
Start from torque and reuse. All of the shallow multi-hole drives are low-to-medium torque fixings; within that, the two-hole patterns are the most cam-out-prone, the angled pattern adds off-axis removal resistance, and the four-hole pattern buys driver contact and a cleaner face in stainless. Pick by the driver your maintenance team already carries, the finish the surface needs, and how often the joint reopens.
What is the MOQ and lead time for this nut type?
The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common diameters in this nut type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.
What should an RFQ for this nut type state?
State the designation (for example the spanner-drive SKU and head style), nominal thread size and pitch, material and finish, whether the matching drive tool or bit is needed, the mating screw or stud specification, required certificates, and quantity per size — plus destination country.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your 4H02 Four-Hole Security Nuts inquiry
- ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
- ✓ State the nut property class or material and the bolt class/material it must be paired with.
- ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
- ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
- ✓ Factory-direct pricing for your 4H02 Four-Hole Security Nuts
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support