DIN 929 Hex Weld Nuts
DIN 929 hex weld nuts, M3 to M16 — the hex nut with pilot ring and weld projections that fuses into thin sheet — with the full collected 11-column table: pitch, weld-projection geometry, pilot and bore diameters, nut height, width across flats, reference mass and the source's proof-load rows.
Last updated: 2026-11
Specifications
A DIN 929 hex weld nut puts a serviceable machine thread into sheet metal too thin to tap. Four weld projections on the bearing face touch the sheet first; resistance welding current fuses them, and the nut sits flush with a thread that survives repeated assembly cycles — the standard solution on brackets, chassis panels and enclosures where a self-tapping thread would strip or a projection weld stud would show through. The collected table covers M3 to M16 with thread pitch (coarse plus the source's fine-thread columns), weld-projection height b, weld-ring diameter d 1, pilot diameter d 2, bore d3, width across corners e, projection heights h 1 / h 2, nut height m, width across flats s, the source's reference mass per 1000 units, and its Ensure-the-load proof-load rows in newtons. The source also prints two 7/16 UNF-2B inch columns inside the metric series — reproduced verbatim with the source's markers. Materials and finishes are not printed by the collected specification and stay per RFQ. The round-body counterpart is DIN 928's square form on the same welding principle.
| Standard | DIN 929 — hex weld nuts (resistance-welded, projections on bearing face) |
|---|---|
| Series | M3 – M16 (source also prints two 7/16 UNF-2B ① inch columns, reproduced verbatim) |
| Tabulated geometry | Per size: pitch P (coarse + fine columns), projection height b, weld-ring d 1, pilot d 2, bore d3, across corners e, projection heights h 1 / h 2, height m, across flats s, reference mass per 1000 units ≈ kg |
| Proof load | Source "Ensure the load(N)" rows in newtons per size — coarse and fine thread columns |
| Function | Fuses into sheet by projection welding; gives a reusable machine thread in thin panel |
| Materials / strength | Not tabulated by the collected specification beyond the source proof-load rows — per RFQ (weldability grade per application) |
| Thread Size D | P — Pitch, Coarse thread | P — Fine thread 1 | P — Fine thread 2 | b — Nominal Size | b — max | b — min | d 1 — Nominal Size (d11) | d 1 — max | d 1 — min | d 2 — min=nominal size (H13) | d 2 — max | d3 — max | e — min | h 1 — max | h 1 — min | h 2 — max | h 2 — min | m — max=nominal size (h14) | m — min | s — max=nominal size (h13) | s — min | per 1000 units ≈ kg | Ensure the load(N) — Coarse thread | Ensure the load(N) — Fine thread 1 | Ensure the load(N) — Fine thread 2 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M3 | 0.5 | / | / | 0.8 | 1 | 0.6 | 4.5 | 4.47 | 4.395 | 4.5 | 4.68 | 3.15 | 8.15 | 0.55 | 0.45 | 0.25 | 0.15 | 3 | 2.75 | 7.5 | 7.28 | 0.78 | 3800 | / | / |
| M4 | 0.7 | / | / | 0.8 | 1 | 0.6 | 6 | 5.97 | 5.895 | 6 | 6.18 | 4.2 | 9.83 | 0.65 | 0.55 | 0.35 | 0.25 | 3.5 | 3.2 | 9 | 8.78 | 1.13 | 6800 | / | / |
| M5 | 0.8 | / | / | 0.8 | 1 | 0.6 | 7 | 6.96 | 6.87 | 7 | 7.22 | 5.25 | 10.95 | 0.7 | 0.6 | 0.4 | 0.3 | 4 | 3.7 | 10 | 9.78 | 1.73 | 11000 | / | / |
| M6 | 1 | / | / | 0.9 | 1.12 | 0.68 | 8 | 7.96 | 7.87 | 8 | 8.22 | 6.3 | 12.02 | 0.75 | 0.6 | 0.4 | 0.3 | 5 | 4.7 | 11 | 10.73 | 2.5 | 15500 | / | / |
| M8 | 1.25 | 1 | / | 1 | 1.25 | 0.75 | 10.5 | 10.45 | 10.34 | 10.5 | 10.77 | 8.4 | 15.38 | 0.9 | 0.75 | 0.5 | 0.35 | 6.5 | 6.14 | 14 | 13.73 | 5.27 | 28300 | 30200 | / |
| M10 | 1.5 | 1.25 | 1 | 1.25 | 1.55 | 0.95 | 12.5 | 12.45 | 12.34 | 12.5 | 12.77 | 10.5 | 18.74 | 1.15 | 0.95 | 0.65 | 0.5 | 8 | 7.64 | 17 | 16.73 | 9.58 | 44800 | 47800 | 50200 |
| 7/16 UNF-2B ① | / | / | 20* | 1.25 | 1.55 | 0.95 | 12.5 | 12.45 | 12.34 | 13.5 | 13.77 | 11.7 | 18.74 | 1.15 | 0.95 | 0.65 | 0.45 | 10 | 9.64 | 17 | 16.73 | 12 | / | / | 53600 |
| 7/16 UNF-2B ① | / | / | 20* | 1.25 | 1.55 | 0.95 | 13.5 | 13.45 | 13.34 | 13.5 | 13.77 | 11.7 | 20.91 | 1.4 | 1.2 | 0.8 | 0.6 | 10 | 9.64 | 19 | 18.67 | 14 | / | / | 53600 |
| M12 | 1.75 | 1.25 | 1.5 | 1.25 | 1.55 | 0.95 | 14.8 | 14.75 | 14.64 | 14.8 | 15.07 | 12.6 | 20.91 | 1.4 | 1.2 | 0.8 | 0.6 | 10 | 9.64 | 19 | 18.67 | 13.7 | 65300 | 72100 | 68200 |
| (M14) | 2 | 1.5 | / | 1.5 | 1.9 | 1.1 | 16.8 | 16.75 | 16.64 | 16.8 | 17.07 | 14.7 | 24.27 | 1.8 | 1.6 | 1 | 0.8 | 11 | 10.57 | 22 | 21.67 | 21.3 | 89700 | 97500 | / |
| M16 | 2 | 1.5 | / | 1.5 | 1.9 | 1.1 | 18.8 | 18.735 | 18.605 | 18.8 | 19.13 | 16.8 | 26.51 | 1.8 | 1.6 | 1 | 0.8 | 13 | 12.57 | 24 | 23.67 | 28.5 | 123000 | 132000 | / |
Materials
- Material and finish specified per RFQ — weldability depends on the sheet stack-up; confirm at quotation
Ordering & documentation
Documents
Shipments of DIN 929 Hex Weld Nuts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 929 Hex Weld Nuts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 929 Hex Weld Nuts), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for DIN 929 Hex Weld Nuts: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for din 929 hex weld nuts is 10,000 pieces (applies to the standard sizes and finishes for din 929 hex weld nuts; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 929 hex weld nuts run 3–7 days. Quantities or variants of din 929 hex weld nuts outside the standard range are confirmed at quotation.
Storage & shipping
DIN 929 Hex Weld Nuts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 929 hex weld nuts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
Weld nut or tapped sheet — when is DIN 929 worth the welding step?
When the joint is assembled more than once. A thread tapped into 1.5 mm sheet has one or two usable engagements and strips on the third; a DIN 929 weld nut carries a full hex-nut thread depth in sheet half that thick, so the same fastener can be serviced indefinitely. The cost is the welding setup — an electrode or gun sized to the pilot diameter d 2 in the tabulated table, and projections that burn cleanly into plain low-carbon sheet. On galvanized or coated panel the coating burns back at the projections and the weld should be qualified on the actual stack. Once the fixture exists, the per-part cost is cents and the thread is bulletproof.
What is the MOQ and lead time for this nut type?
The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common diameters in this nut type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.
What is the MOQ and lead time for DIN 929 Hex Weld Nuts?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for DIN 929 Hex Weld Nuts state?
State the full designation (DIN 929), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 929 Hex Weld Nuts inquiry
- ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
- ✓ State the nut property class or material and the bolt class/material it must be paired with.
- ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
- ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
- ✓ Factory-direct pricing for your DIN 929 Hex Weld Nuts
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support