DIN 103 Trapezoidal Thread Hex Nut (Tr)
DIN 103 trapezoidal hex nut, Tr 10 to Tr 40 — the hex-profile travel nut for Tr lead screws, wrench-flatted for anti-rotation in the housing — with the collected 14-size table: thread d1, pitch P, width across flats s and nut height h.
Last updated: 2026-11
Specifications
The trapezoidal hex nut is the standard travel and tension nut for DIN 103 Tr-thread screws: a hex outside lets a spanner or a machined hex pocket take the torque reaction, so the nut rides the screw without spinning in its seat — the classic arrangement on gate and valve stems, clamp spindles, presses and screw jacks where the nut either travels along the rotating screw or is held stationary while the screw turns through it. The collected table covers Tr 10 to Tr 40 — 14 sizes — with four rows per size: thread d1, pitch P, width across flats s (17 mm at Tr 10 up to 65 mm at Tr 40) and nut height h (15 mm up to 60 mm — roughly 1.5 × d1 across the range, the engagement length that distributes load over several trapezoidal turns). Thread-fit class, multi-start variants, materials and finishes are not printed by the collected specification and stay per RFQ. For the unflatted cylindrical form see the DIN 103 trapezoidal round nut page; for the mating rod see the DIN 103 trapezoidal thread rod page in the bolts family.
| Standard | DIN 103 — trapezoidal (Tr) thread hex nut, 30° flank profile mating the Tr screw |
|---|---|
| Series | Tr 10 – Tr 40 (14 sizes tabulated) |
| Tabulated geometry | Per size: thread d1, pitch P, width across flats s (17–65 mm), nut height h (15–60 mm, ≈ 1.5 × d1 across the range) |
| Function | Hex flats take the torque reaction so the nut translates or holds without spinning in its seat |
| Thread fit / materials | Not tabulated by the collected specification — per RFQ |
| Thread d1 | Pitch P | s — width across flats | h — nut height |
|---|---|---|---|
| TR 10 | 3 | 17 | 15 |
| TR 12 | 3 | 19 | 18 |
| TR 14 | 4 | 22 | 21 |
| TR 16 | 4 | 27 | 24 |
| TR 18 | 4 | 27 | 27 |
| TR 20 | 4 | 30 | 30 |
| TR 22 | 5 | 30 | 33 |
| TR 24 | 5 | 36 | 36 |
| TR 26 | 5 | 36 | 39 |
| TR 28 | 5 | 41 | 42 |
| TR 30 | 6 | 46 | 45 |
| TR 32 | 6 | 46 | 48 |
| TR 36 | 6 | 55 | 54 |
| TR 40 | 7 | 65 | 60 |
Materials
- Material and thread-fit class specified per RFQ — confirm against screw size and duty cycle at quotation
Ordering & documentation
Documents
Shipments of DIN 103 Trapezoidal Thread Hex Nut (Tr) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 103 Trapezoidal Thread Hex Nut (Tr) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 103 Trapezoidal Thread Hex Nut (Tr)), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for DIN 103 Trapezoidal Thread Hex Nut (Tr): own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for din 103 trapezoidal thread hex nut (tr) is 10,000 pieces (applies to the standard sizes and finishes for din 103 trapezoidal thread hex nut (tr); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 103 trapezoidal thread hex nut (tr) run 3–7 days. Quantities or variants of din 103 trapezoidal thread hex nut (tr) outside the standard range are confirmed at quotation.
Storage & shipping
DIN 103 Trapezoidal Thread Hex Nut (Tr) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 103 trapezoidal thread hex nut (tr) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
Hex or round trapezoidal nut for a Tr screw?
Decide by how the nut is held. The hex form is kept from turning by a spanner flat — it drops into a hex pocket or takes a wrench, which is why it is the service-friendly choice on stems, jacks and adjusting spindles that get dismantled. The round form is pressed or pinned into a plain bore, cleaner in a machined housing but less convenient to replace. Both carry the same Tr thread and similar tabulated heights, so the choice is mounting, not load. Check the collected table's s column against the pocket or wrench you intend to use — s runs from 17 mm at Tr 10 to 65 mm at Tr 40 — and read the h column as your engagement: about one and a half diameters, enough turns to spread the flank load, but still worth de-rating for high duty cycles and abrasive environments. State thread-fit class and lubrication at RFQ.
What is the MOQ and lead time for this nut type?
The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common sizes in this nut type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.
What is the MOQ and lead time for DIN 103 Trapezoidal Thread Hex Nut (Tr)?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for DIN 103 Trapezoidal Thread Hex Nut (Tr) state?
State the full designation (DIN 103), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 103 Trapezoidal Thread Hex Nut (Tr) inquiry
- ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
- ✓ State the nut property class or material and the bolt class/material it must be paired with.
- ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
- ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
- ✓ Factory-direct pricing for your DIN 103 Trapezoidal Thread Hex Nut (Tr)
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support