ASTM A194 Grade 7 Heavy Hex Nuts

ASTM A194 Grade 7 heavy hex nuts — quenched and tempered chromium-molybdenum alloy steel of the AISI 4140 type (C 0.37–0.49%, Cr 0.75–1.20%, Mo 0.15–0.25%), the high-strength alloy grade listed with grade 4 for A320 L7 stud assemblies. Hardness and proof-load rows are not tabulated in the collected sources and are not asserted.

Last updated: 2026-11

Request a Quote

ASTM A194 Grade 7 Heavy Hex Nuts in an industrial setting
Illustrative image redrawn from real ASTM A194 Grade 7 Heavy Hex Nuts product references — not a photograph of stocked items.

Specifications

Grade 7 is the chromium-molybdenum alloy member of ASTM A194: the collected grade table titles it "Quenched & tempered alloy steel hvy hex nut" and the chemistry row names the AISI 4140 type — carbon 0.37–0.49%, chromium 0.75–1.20% and molybdenum 0.15–0.25% — the classic Cr-Mo alloy whose through-hardening behaviour is why the grade serves high-strength alloy stud assemblies. In stud-bolt practice the collected pairing tables list grade 7, with grade 4, as the nut side for A320 L7 studs in cryogenic and low-temperature service. One transcription note for honesty: the collected source's silicon cell in the 7/7M row reads internally inconsistently ("0.15-0.035%"), so the silicon figure is shown here as the 0.15–0.35% band consistent with the row's other cells and should be verified on the mill certificate. The collected sources print no hardness or proof-load rows for grade 7, so none are asserted — take mechanical figures from the certificate against the size of record.

Standard ASTM A194 — Grade 7 (heavy hex pattern)
Material Chromium-molybdenum alloy steel, AISI 4140 type, quenched and tempered
Chemistry C 0.37–0.49%, Mn 0.65–1.10%, P max 0.04%, S max 0.04%, Si 0.15–0.35% (see transcription note), Cr 0.75–1.20%, Mo 0.15–0.25%
Transcription note The collected silicon cell for the 7/7M row prints "0.15-0.035%" — internally inconsistent with the row format; rendered here as 0.15–0.35% and to be verified per mill certificate
Service pairing Listed with grade 4 as the nut side for A320 L7 studs — cryogenic / low-temperature assemblies (collected pairing table)
Hardness / proof load Not tabulated in the collected sources for grade 7 — confirm per mill certificate against the size of record

Materials

  • Chromium-molybdenum alloy steel (AISI 4140 type), quenched and tempered

Ordering & documentation

Documents

Shipments of ASTM A194 Grade 7 Heavy Hex Nuts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ASTM A194 Grade 7 Heavy Hex Nuts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ASTM A194 Grade 7 Heavy Hex Nuts), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for ASTM A194 Grade 7 Heavy Hex Nuts: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for astm a194 grade 7 heavy hex nuts is 10,000 pieces (applies to the standard sizes and finishes for astm a194 grade 7 heavy hex nuts; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for astm a194 grade 7 heavy hex nuts run 3–7 days. Quantities or variants of astm a194 grade 7 heavy hex nuts outside the standard range are confirmed at quotation.

Storage & shipping

ASTM A194 Grade 7 Heavy Hex Nuts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store astm a194 grade 7 heavy hex nuts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Is Grade 7 the same steel as the A320 L7 studs it pairs with?

It is the same alloy family — the AISI 4140-type chromium-molybdenum chemistry (C 0.37–0.49%, Cr 0.75–1.20%, Mo 0.15–0.25%) is printed for the nut grade on the collected table, and L7 is the low-temperature stud specification built on that chemistry. The pairing exists because nut and stud need compatible strength and toughness behaviour through the heat treatment each specification prescribes. Order both sides by their own designations — A320 L7 studs and A194 7 nuts — and require mill certificates for each; the collected sources print no mechanical rows for the nut grade itself.

Why is the silicon chemistry cell flagged on this page?

Honesty about source quality. The collected transcription of the A194 chemistry table prints the silicon cell in the 7/7M row as "0.15-0.035%" — a range with its lower bound above its upper bound, which cannot be read as printed. The band rendered here (0.15–0.35%) is the reading consistent with the format of the surrounding cells, but a chemistry figure reconstructed from a defective transcription is not the same as a verified one, so the page says so and directs the check to the mill certificate that ships with the nuts.

What is the MOQ and lead time for this nut type?

The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common diameters in this nut type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

What should an RFQ for this nut type state?

State the standard designation (for example DIN 985 or DIN 6923), nominal thread size and pitch (metric coarse unless fine pitch is required), material and strength pairing with the mating bolt, finish (plain, zinc, or hot-dip galvanized where compatible), required certificates such as a mill test report per EN 10204 3.1, and quantity per size — plus destination country.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ASTM A194 Grade 7 Heavy Hex Nuts inquiry

  • ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
  • ✓ State the nut property class or material and the bolt class/material it must be paired with.
  • ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
  • ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
  • ✓ Factory-direct pricing for your ASTM A194 Grade 7 Heavy Hex Nuts
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.