DIN 980 All-Metal (Stover) Lock Nuts

All-metal prevailing-torque lock nuts per DIN 980 (Stover type) — a one-piece steel nut whose distorted top thread grips the bolt by metal-to-metal friction. No nylon, so it carries high temperature, heavy-duty service and many reuse cycles.

Last updated: 2026-11

Request a Quote

DIN 980 All-Metal (Stover) Lock Nuts in an industrial setting
Illustrative image redrawn from real DIN 980 All-Metal (Stover) Lock Nuts product references — not a photograph of stocked items.

Specifications

The Stover-type lock nut solves the nyloc's temperature and reuse ceiling by dropping the polymer entirely: a one-piece steel nut with a slightly distorted top thread that grips the bolt by metal-to-metal friction. With no insert to soften, it works where nylocks cannot — high temperature, heavy-duty service, and applications that need more installation cycles. Select it to the mating bolt strength: for Grade 8 / Grade 9 inch-series bolt assemblies, the Grade 9 all-metal version is the matching choice. The trade-off is a slightly higher running torque and more wear on the bolt thread than a nylon insert causes.

Standard DIN 980 / DIN 6925 — all-metal prevailing-torque lock nut (Stover type)
Locking mechanism Distorted top thread grips the bolt by metal-to-metal friction — no nylon insert
Temperature limit High — all-steel construction has no polymer insert to soften
Reuse Good — tolerates more installation cycles than a nylon-insert nut
Grade pairing Match to the bolt grade; Grade 9 all-metal version for Grade 8 / Grade 9 bolt assemblies
Typical applications High temperature, heavy-duty service, and joints that need frequent reassembly

Materials

  • Steel
  • Stainless steel

DIN 980 is the all-metal prevailing-torque lock nut: the top section is pressed slightly out-of-round (tri-lobular), so the nut's own threads deform elastically against the bolt thread to create the locking friction — no polymer insert involved.

That is the whole material decision in one line: nothing non-metallic means nothing to melt — typically 200 C continuous service with spike capability to 300 C, versus the nylon-insert 120 C ceiling — and the lock tolerates roughly 5-10 reuse cycles instead of single-use, at the cost of higher installation torque and price. For exhaust-side, oven, furnace-flange or heavy-vibration joints, this is the lock nut, not DIN 985.

Ordering & documentation

Documents

Shipments of DIN 980 All-Metal (Stover) Lock Nuts are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 980 All-Metal (Stover) Lock Nuts orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 980 All-Metal (Stover) Lock Nuts), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Supply source for DIN 980 All-Metal (Stover) Lock Nuts: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).

Minimum order quantity for din 980 all-metal (stover) lock nuts is 10,000 pieces (applies to the standard sizes and finishes for din 980 all-metal (stover) lock nuts; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 980 all-metal (stover) lock nuts run 3–7 days. Quantities or variants of din 980 all-metal (stover) lock nuts outside the standard range are confirmed at quotation.

Storage & shipping

DIN 980 All-Metal (Stover) Lock Nuts are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 980 all-metal (stover) lock nuts dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

What is a Stover nut, and when is it better than a nyloc?

A Stover nut is an all-metal prevailing-torque lock nut — a one-piece steel nut with a distorted top thread that grips the bolt by friction, with no nylon insert. Neither lock nut is universally better: nylon-insert is cheaper and fine for general, moderate-temperature assembly, while all-metal (Stover) handles high heat (above roughly 250°F), heavy-duty loads and frequent reuse where nylon would fail. Choose by joint temperature, service load and how often the joint is taken apart.

What is the MOQ and lead time for this nut type?

The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common diameters in this nut type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

What should an RFQ for this nut type state?

State the standard designation (for example DIN 985 or DIN 6923), nominal thread size and pitch (metric coarse unless fine pitch is required), material and strength pairing with the mating bolt, finish (plain, zinc, or hot-dip galvanized where compatible), required certificates such as a mill test report per EN 10204 3.1, and quantity per size — plus destination country.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 980 All-Metal (Stover) Lock Nuts inquiry

  • ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
  • ✓ State the nut property class or material and the bolt class/material it must be paired with.
  • ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
  • ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
  • ✓ Factory-direct pricing for your DIN 980 All-Metal (Stover) Lock Nuts
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.