DIN 982 Hex Thick Nuts with Non-Metallic Insert
DIN 982 hexagon thick nuts ("Tall NYLOC") with non-metallic nylon insert, M5 to M24 — the tall prevailing-torque lock nut whose nylon collar grips the bolt thread, with the collected per-size tables: pitches, d a, d w, e, h, m, m w and s, plus source mass rows.
Last updated: 2026-11
Specifications
DIN 982 is the tall nylon-insert lock nut: a hex nut with extra height h that carries a non-metallic (nylon) collar at the top. Running the bolt into the collar deforms the nylon around the threads, and that elastic interference is the prevailing torque — a lock that survives vibration and repeated reassembly without a separate lock washer or threadlocker, because the collar grips every time the thread passes through it. The tall body is the design point versus the thin DIN 985: more metal under the collar means the nut can carry the full clamp of the bolt before the nylon sees load, so DIN 982 suits joints where the lock nut is the working nut, not just a jam backup. The collected tables run M5 to M24 with coarse and fine pitch options per size, d a, bearing-face d w, e, overall height h (max/min), metal-body height m, m w and across-flats s, plus the source mass-per-1000 rows printed verbatim. Insert material temperature limits and finishes are not printed by the collected specification and stay per RFQ — a nylon collar has real temperature ceilings, so state the duty temperature at RFQ.
| Standard | DIN 982 — hexagon thick nuts with non-metallic insert (tall nylon-insert prevailing-torque lock nuts) |
|---|---|
| Series | M5 – M24 (four source column groups; coarse and fine pitch options tabulated per size) |
| Tabulated geometry | Per size: pitch (coarse / Fine thread 1/2 as printed), d a (min/max), d w (min), e (min, 8.79–39.55 mm), h (max/min, 6.3–28 mm), m (min), m w (min), s (max=nominal/min, 8–36 mm), source mass per 1000 units ≈ kg |
| Locking mechanism | Nylon collar deforms around the bolt thread — prevailing torque, reusable, no separate lock washer needed |
| Insert temp limit / finishes | Not tabulated by the collected specification — per RFQ (state duty temperature: the nylon collar defines the ceiling) |
| Attribute | M5 | M6 | M7 |
|---|---|---|---|
| Pitch — Pitch — Coarse thread | 0.8 | 1 | 1 |
| Fine thread 1 | / | / | / |
| Fine thread 2 | / | / | / |
| d a — min | 5 | 6 | 7 |
| max | 5.75 | 6.75 | 7.75 |
| d w — min | 6.9 | 8.9 | 9.6 |
| e — min | 8.79 | 11.05 | 12.12 |
| h — max=nominal size | 6.3 | 8 | 8.5 |
| min | 6 | 7.7 | 8.2 |
| m — min | 4.4 | 4.9 | 6.14 |
| m w — min | 3.52 | 3.92 | 4.91 |
| s — max=nominal size | 8 | 10 | 11 |
| min | 7.78 | 9.78 | 10.73 |
| per 1000 units ≈ kg | 1.4 | 3.1 | 3.2 |
| Attribute | M8 | M10 | M12 |
|---|---|---|---|
| Pitch — Pitch — Coarse thread | 1.25 | 1.5 | 1.75 |
| Fine thread 1 | 1 | 1 | 1.5 |
| Fine thread 2 | / | 1.25 | 1.25 |
| d a — min | 8 | 10 | 12 |
| max | 8.75 | 10.8 | 13 |
| d w — min | 11.6 | 15.6 | 17.4 |
| e — min | 14.38 | 18.9 | 21.1 |
| h — max=nominal size | 9.5 | 11.5 | 14 |
| min | 9.14 | 11.14 | 13.64 |
| m — min | 6.44 | 8.04 | 10.37 |
| m w — min | 5.15 | 6.43 | 8.3 |
| s — max=nominal size | 13 | 17 | 19 |
| min | 12.73 | 16.73 | 18.67 |
| per 1000 units ≈ kg | 6 | 11.7 | 16.6 |
| Attribute | M14 | M16 | M18 |
|---|---|---|---|
| Pitch — Pitch — Coarse thread | 2 | 2 | 2.5 |
| Fine thread 1 | 1.5 | 1.5 | 2 |
| Fine thread 2 | / | / | 1.5 |
| d a — min | 14 | 16 | 18 |
| max | 15.1 | 17.3 | 19.5 |
| d w — min | 20.5 | 22.5 | 24.9 |
| e — min | 24.49 | 26.75 | 29.56 |
| h — max=nominal size | 16 | 18 | 20 |
| min | 15.3 | 17.3 | 19.16 |
| m — min | 12.1 | 14.1 | 15.1 |
| m w — min | 9.68 | 11.28 | 12.08 |
| s — max=nominal size | 22 | 24 | 27 |
| min | 21.67 | 23.67 | 26.16 |
| per 1000 units ≈ kg | 21 | 37.8 | 51.6 |
| Attribute | M20 | M22 | M24 |
|---|---|---|---|
| Pitch — Pitch — Coarse thread | 2.5 | 2.5 | 3 |
| Fine thread 1 | 2 | 2 | 2 |
| Fine thread 2 | 1.5 | 1.5 | / |
| d a — min | 20 | 22 | 24 |
| max | 21.6 | 23.7 | 25.9 |
| d w — min | 27.7 | 29.5 | 33.2 |
| e — min | 32.95 | 35.03 | 39.55 |
| h — max=nominal size | 22 | 25 | 28 |
| min | 20.7 | 23.7 | 26.7 |
| m — min | 16.9 | 18.1 | 20.2 |
| m w — min | 13.52 | 14.48 | 16.16 |
| s — max=nominal size | 30 | 32 | 36 |
| min | 29.16 | 31 | 35 |
| per 1000 units ≈ kg | 68 | 86 | 127 |
Materials
- Body material and finish specified per RFQ; insert is non-metallic (nylon) per the standard — confirm duty temperature at quotation
Ordering & documentation
Documents
Shipments of DIN 982 Hex Thick Nuts with Non-Metallic Insert are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 982 Hex Thick Nuts with Non-Metallic Insert orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 982 Hex Thick Nuts with Non-Metallic Insert), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Supply source for DIN 982 Hex Thick Nuts with Non-Metallic Insert: own manufacturing plus qualified outsourcing (per the owner-confirmed scope of supply (own production plus outsourcing)).
Minimum order quantity for din 982 hex thick nuts with non-metallic insert is 10,000 pieces (applies to the standard sizes and finishes for din 982 hex thick nuts with non-metallic insert; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 982 hex thick nuts with non-metallic insert run 3–7 days. Quantities or variants of din 982 hex thick nuts with non-metallic insert outside the standard range are confirmed at quotation.
Storage & shipping
DIN 982 Hex Thick Nuts with Non-Metallic Insert are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 982 hex thick nuts with non-metallic insert dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
DIN 982 (tall) or DIN 985 (thin) nylon-insert lock nut?
By whether the lock nut carries the clamp or just backs it up. The tall DIN 982 body — the collected tables show h of 6.3 mm at M5 rising to 28 mm at M24, well above the thin series — puts enough steel between the joint face and the nylon collar that the nut can take the bolt's full preload with the collar still unloaded, so it is the pick where one nut does both jobs: clamping and locking. The thin DIN 985 suits tighter stack heights and lightly loaded covers. Both lock the same way — the collar grips the thread with prevailing torque, so neither needs a lock washer, and both lose grip as temperatures approach the nylon's limit. State your duty temperature and whether the nut is the working fastener at RFQ; the exact insert compound is confirmed per order.
What is the MOQ and lead time for this nut type?
The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common sizes in this nut type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.
What is the MOQ and lead time for DIN 982 Hex Thick Nuts with Non-Metallic Insert?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for DIN 982 Hex Thick Nuts with Non-Metallic Insert state?
State the full designation (DIN 982), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 982 Hex Thick Nuts with Non-Metallic Insert inquiry
- ✓ Name the nut standard, style and nominal thread size/pitch, including metric or inch thread series.
- ✓ State the nut property class or material and the bolt class/material it must be paired with.
- ✓ Specify locking or prevailing-torque feature, coating and corrosion environment.
- ✓ Give quantity per size, destination and any lot or mechanical-test documentation.
- ✓ Factory-direct pricing for your DIN 982 Hex Thick Nuts with Non-Metallic Insert
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support