2H04 Two Hole Pan Self Tapping Security Screws

Pan head two-hole self-tapping security screws, No.4–No.14 as tabulated (2.9–6.3 mm nominal): head diameters 5.4–12.2 mm, head heights 1.6–3.5 mm. A2 stainless steel standard; marked lengths run from 1/4″ to 2 1/2″ per the collected matrix, cell by cell with gaps.

Last updated: 2026-11

Request a Quote

2H04 Two Hole Pan Self Tapping Security Screws in an industrial setting
Illustrative image redrawn from real 2H04 Two Hole Pan Self Tapping Security Screws product references — not a photograph of stocked items.

Specifications

2H04 takes the pig nose drive onto sheet metal and plastics: a self-tapping thread that cuts its own path — no nuts, no pre-tapped holes — under the rounded pan head that carries the twin-hole drive. The collected tabulation runs gauges No.4 to No.14 (nominal 2.9 to 6.3 mm) with head diameters 5.4–12.2 mm and head heights 1.6–3.5 mm, and the page states supply as standard in A2 stainless steel with sizes No.4 to No.14 in lengths from 1/4″ to 2 1/2″ — the electrical-trade ground this gauge span covers: prisons, hospitals, schools, lifts, trains and public areas, the same serviced-space list the machine-thread members name. The length matrix marks cells individually rather than as full bands — a few gauge/length pairs inside the headline ranges print no marker — so the marked pairs are the orderable spine and the unmarked ones are quotation lines, not silent assumptions. As everywhere in the two-hole family, the drive is a reusable two-way fixing for low to medium torque, more prone to cam-out than pin-hex, with the hole centre distance varying between makers: buy the screws and the insert bits from the same supplier and keep spares.

Designation 2H04 — pan head self-tapping security screw, two-hole drive; thread-cutting into sheet metal and plastic, two-pin insert bit
Gauge range (tabulated) No.4, No.6, No.8, No.10, No.12, No.14 (nominal 2.9–6.3 mm)
Head diameter dk per gauge (mm) No.4 5.4 · No.6 6.7 · No.8 8.0 · No.10 9.2 · No.12 10.5 · No.14 12.2
Head height k per gauge (mm) No.4 1.6 · No.6 2.0 · No.8 2.3 · No.10 2.7 · No.12 3.1 · No.14 3.5
Tool size (collected) No.4 · No.6 · No.8 · No.10 · No.12 · No.14 two-pin insert bits by gauge
Length availability (as marked) Matrix 1/4″–2 1/2″ marked cell by cell — most gauge/length pairs from 1/2″ up are marked across all gauges; several small-gauge long-length pairs and the 2 1/2″ extreme are unmarked; exact pair confirmed at quotation
Security principle Reusable two-way fixing, low/medium security resistance, low to medium torque; cam-out and bit wear as per the two-hole family
Materials (collected) A2 stainless steel as standard; non-standard sizes, materials and finishes to order, including small-volume manufacture and parts made to drawings

Materials

  • A2 stainless steel

Ordering & documentation

Documents

Shipments of 2H04 Two Hole Pan Self Tapping Security Screws are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for 2H04 Two Hole Pan Self Tapping Security Screws orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (2H04 Two Hole Pan Self Tapping Security Screws), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for 2h04 two hole pan self tapping security screws is 10,000 pieces (applies to the standard sizes and finishes for 2h04 two hole pan self tapping security screws; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for 2h04 two hole pan self tapping security screws run 3–7 days. Quantities or variants of 2h04 two hole pan self tapping security screws outside the standard range are confirmed at quotation.

Storage & shipping

2H04 Two Hole Pan Self Tapping Security Screws are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store 2h04 two hole pan self tapping security screws dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Where does the self-tapping pig nose earn its place over the machine-thread version?

Anywhere the substrate has no thread to receive one: sheet-metal enclosure walls, plastic housings, plywood-backed panels. The machine-thread 2H01 needs a nut or a tapped hole; 2H04 needs only a pilot, which makes it the standard choice on electrical enclosures and public-transport interiors — the exact spaces the collected page names. Security behaviour is identical across the two: same twin-hole drive, same reusable two-way fixing, same matching insert bit.

Which pilot hole does a two-hole self-tapper need?

The self-tapping thread cuts its own internal thread but still depends on the correct pilot for the gauge and substrate — too small and the screw binds or the panel distorts, too large and the thread form is shallow. The collected table tabulates nominal diameters per gauge (No.4 at 2.9 mm through No.14 at 6.3 mm), which sizes that calculation. Confirm the pilot against the substrate at quotation, and note the marked length cells before committing to a gauge/length pair.

What is the MOQ and lead time for these security screws?

Minimum order quantity is 10,000 pieces per item. Stocked sizes ship in 3–7 days; sizes quoted as available to order, and non-standard sizes or materials, are quoted with a confirmed schedule. Confirm the exact schedule against quantity and size mix at quotation.

What should an RFQ for these security screws state?

State the designation code (2H01 through 2H14) and head style, the drive (two-hole pig nose / snake eye — fitted with a matching two-pin insert bit), thread or tapping size and length, the hole centre distance your existing bits expect (the source notes it varies between makers), material and finish, the substrate or mating part, required certificates, and quantity per size — plus destination country.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your 2H04 Two Hole Pan Self Tapping Security Screws inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your 2H04 Two Hole Pan Self Tapping Security Screws
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.