ASME B18.11 Slotted Head Miniature Screws — Fillister / Pan / Flat Head Dimensions (30 UNM – 140 UNM)
ASME B18.11 slotted head miniature screw head dimensions — fillister, pan and flat (100° countersunk) head diameter, height, slot width/depth, chamfer and cone/radius features per size from 30 UNM to 140 UNM, transcribed row-for-row from the collected charts.
Last updated: 2026-11
Specifications
UNM threads define the screw's helix; ASME B18.11 defines its head. The collected charts carry all three classic slotted miniature head styles per size from 30 UNM (0.0118 in basic major) to 140 UNM (0.0551 in): fillister — flat top, cylindrical sides, flat bearing, the tall precision head; pan — flat top with cylindrical sides on a flat bearing but shorter and broader, the electronics-panel workhorse; and flat head — countersunk at approximately 100° (a miniature-specific angle, not the inch-standard 82° or metric 90°; the source's own note), sitting flush in a mating countersink. The three head tables share a column set per size — head diameter A max/min, head height H max/min, slot width J max/min, slot depth T max/min — with the fillister and pan adding a chamfer dimension C, and the flat head adding Av (full cone diameter at max height), R (min radius) and the body-diameter note (source Note 1: body dia. may not exceed max major nor fall below min pitch diameter). Reading the pan table at 60 UNM: A 0.051/0.049 in, H 0.020/0.017, J 0.010/0.007, T 0.010/0.007. Head choice is an assembly-design decision (flush vs proud, driver access, head height budget); material, finish and drive-slot quality class are per RFQ — and the mating threads live on the ASME B1.10M UNM page.
| Standard | ASME B18.11 — slotted head miniature screws; fillister, pan and flat head styles, slotted drive |
|---|---|
| Size range | 30 UNM – 140 UNM (basic major 0.0118 – 0.0551 in), 14 sizes per head table; TPI 318 down to 85 |
| Fillister head (in) | Per size: A head dia. max/min, H height max/min, J slot width max/min, T slot depth max/min, C chamfer max/min; flat top, cylindrical sides, flat bearing |
| Pan head (in) | Same column set as fillister; shorter and broader profile for panel hardware — example 60 UNM: A 0.051/0.049, H 0.020/0.017, J 0.010/0.007, T 0.010/0.007 |
| Flat head (in) | Approx. 100° countersink (source note); adds Av full-cone dia. and R min radius columns; body dia. per source Note 1 bounded by max major / min pitch diameter |
| Size Designation | TPI | D — Basic Major Dia. | A — Head Dia. (max) | A (min) | H — Head Height (max) | H (min) | J — Slot Width (max) | J (min) | T — Slot Depth (max) | T (min) | C — Chamfer (max) | C (min) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 30 UNM | 318 | 0.0118 | 0.021 | 0.019 | 0.012 | 0.010 | 0.004 | 0.003 | 0.006 | 0.004 | 0.002 | 0.002 |
| 35 UNM | 282 | 0.0138 | 0.023 | 0.021 | 0.014 | 0.012 | 0.004 | 0.003 | 0.007 | 0.005 | 0.002 | 0.002 |
| 40 UNM | 254 | 0.0157 | 0.025 | 0.023 | 0.016 | 0.013 | 0.005 | 0.003 | 0.008 | 0.006 | 0.002 | 0.002 |
| 45 UNM | 254 | 0.0177 | 0.029 | 0.027 | 0.018 | 0.015 | 0.005 | 0.003 | 0.009 | 0.007 | 0.002 | 0.002 |
| 50 UNM | 203 | 0.0197 | 0.033 | 0.031 | 0.020 | 0.017 | 0.006 | 0.004 | 0.010 | 0.007 | 0.003 | 0.002 |
| 55 UNM | 203 | 0.0217 | 0.037 | 0.035 | 0.022 | 0.019 | 0.006 | 0.004 | 0.011 | 0.008 | 0.003 | 0.002 |
| 60 UNM | 169 | 0.0236 | 0.041 | 0.039 | 0.025 | 0.021 | 0.008 | 0.005 | 0.012 | 0.009 | 0.004 | 0.003 |
| 70 UNM | 145 | 0.0276 | 0.045 | 0.043 | 0.028 | 0.024 | 0.008 | 0.005 | 0.014 | 0.011 | 0.004 | 0.003 |
| 80 UNM | 127 | 0.0315 | 0.051 | 0.049 | 0.032 | 0.028 | 0.010 | 0.007 | 0.016 | 0.012 | 0.005 | 0.004 |
| 90 UNM | 113 | 0.0354 | 0.056 | 0.054 | 0.036 | 0.032 | 0.010 | 0.007 | 0.018 | 0.014 | 0.005 | 0.004 |
| 100 UNM | 102 | 0.0394 | 0.062 | 0.058 | 0.040 | 0.035 | 0.012 | 0.008 | 0.020 | 0.016 | 0.006 | 0.005 |
| 110 UNM | 102 | 0.0433 | 0.072 | 0.068 | 0.045 | 0.040 | 0.012 | 0.008 | 0.022 | 0.018 | 0.006 | 0.005 |
| 120 UNM | 102 | 0.0472 | 0.082 | 0.078 | 0.050 | 0.045 | 0.016 | 0.012 | 0.025 | 0.020 | 0.008 | 0.006 |
| 140 UNM | 85 | 0.0551 | 0.092 | 0.088 | 0.055 | 0.050 | 0.016 | 0.012 | 0.028 | 0.023 | 0.008 | 0.006 |
| Size Designation | TPI | D — Basic Major Dia. | A — Head Dia. (max) | A (min) | H — Head Height (max) | H (min) | J — Slot Width (max) | J (min) | T — Slot Depth (max) | T (min) | C — Chamfer (max) | C (min) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 30 UNM | 318 | 0.0118 | 0.025 | 0.023 | 0.010 | 0.008 | 0.005 | 0.003 | 0.005 | 0.003 | 0.002 | 0.002 |
| 35 UNM | 282 | 0.0138 | 0.029 | 0.027 | 0.011 | 0.009 | 0.005 | 0.003 | 0.006 | 0.004 | 0.002 | 0.002 |
| 40 UNM | 254 | 0.0157 | 0.033 | 0.031 | 0.012 | 0.010 | 0.006 | 0.004 | 0.006 | 0.004 | 0.002 | 0.002 |
| 45 UNM | 254 | 0.0177 | 0.037 | 0.035 | 0.014 | 0.012 | 0.006 | 0.004 | 0.007 | 0.005 | 0.002 | 0.002 |
| 50 UNM | 203 | 0.0197 | 0.041 | 0.039 | 0.016 | 0.013 | 0.008 | 0.005 | 0.008 | 0.006 | 0.003 | 0.002 |
| 55 UNM | 203 | 0.0217 | 0.045 | 0.043 | 0.018 | 0.015 | 0.008 | 0.005 | 0.009 | 0.007 | 0.003 | 0.002 |
| 60 UNM | 169 | 0.0236 | 0.051 | 0.049 | 0.020 | 0.017 | 0.010 | 0.007 | 0.010 | 0.007 | 0.004 | 0.003 |
| 70 UNM | 145 | 0.0276 | 0.056 | 0.054 | 0.022 | 0.019 | 0.010 | 0.007 | 0.011 | 0.008 | 0.004 | 0.003 |
| 80 UNM | 127 | 0.0315 | 0.062 | 0.058 | 0.025 | 0.021 | 0.012 | 0.008 | 0.012 | 0.009 | 0.005 | 0.004 |
| 90 UNM | 113 | 0.0354 | 0.072 | 0.068 | 0.028 | 0.024 | 0.012 | 0.008 | 0.014 | 0.011 | 0.005 | 0.004 |
| 100 UNM | 102 | 0.0394 | 0.082 | 0.078 | 0.032 | 0.028 | 0.016 | 0.012 | 0.018 | 0.014 | 0.006 | 0.005 |
| 110 UNM | 102 | 0.0433 | 0.092 | 0.088 | 0.036 | 0.032 | 0.016 | 0.012 | 0.018 | 0.014 | 0.006 | 0.005 |
| 120 UNM | 102 | 0.0472 | 0.103 | 0.097 | 0.040 | 0.035 | 0.020 | 0.015 | 0.020 | 0.016 | 0.008 | 0.006 |
| 140 UNM | 85 | 0.0551 | 0.113 | 0.107 | 0.045 | 0.040 | 0.020 | 0.015 | 0.022 | 0.018 | 0.008 | 0.006 |
| Size Designation | TPI | D — Basic Major Dia. | A — Head Dia. (max) | A (min) | Av — Full Cone Dia. at Max H | H — Head Height (max) | H (min) | J — Slot Width (max) | J (min) | T — Slot Depth (max) | T (min) | R — Radius (min) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 30 UNM | 318 | 0.0118 | 0.023 | 0.021 | 0.0285 | 0.007 | 0.005 | 0.004 | 0.003 | 0.004 | 0.002 | 0.005 |
| 35 UNM | 282 | 0.0138 | 0.025 | 0.023 | 0.0305 | 0.007 | 0.005 | 0.004 | 0.003 | 0.004 | 0.002 | 0.005 |
| 40 UNM | 254 | 0.0157 | 0.029 | 0.027 | 0.0348 | 0.008 | 0.006 | 0.005 | 0.003 | 0.005 | 0.003 | 0.006 |
| 45 UNM | 254 | 0.0177 | 0.033 | 0.031 | 0.0392 | 0.009 | 0.007 | 0.005 | 0.003 | 0.005 | 0.003 | 0.006 |
| 50 UNM | 203 | 0.0197 | 0.037 | 0.035 | 0.0459 | 0.011 | 0.008 | 0.006 | 0.004 | 0.006 | 0.004 | 0.008 |
| 55 UNM | 203 | 0.0217 | 0.041 | 0.039 | 0.0503 | 0.012 | 0.009 | 0.006 | 0.004 | 0.006 | 0.004 | 0.008 |
| 60 UNM | 169 | 0.0236 | 0.045 | 0.043 | 0.0546 | 0.013 | 0.010 | 0.008 | 0.005 | 0.008 | 0.005 | 0.010 |
| 70 UNM | 145 | 0.0276 | 0.051 | 0.049 | 0.0610 | 0.014 | 0.011 | 0.008 | 0.005 | 0.008 | 0.005 | 0.010 |
| 80 UNM | 127 | 0.0315 | 0.056 | 0.054 | 0.0696 | 0.016 | 0.012 | 0.010 | 0.007 | 0.010 | 0.006 | 0.012 |
| 90 UNM | 113 | 0.0354 | 0.062 | 0.058 | 0.0759 | 0.017 | 0.013 | 0.010 | 0.007 | 0.010 | 0.006 | 0.012 |
| 100 UNM | 102 | 0.0394 | 0.072 | 0.068 | 0.0847 | 0.019 | 0.015 | 0.012 | 0.008 | 0.012 | 0.008 | 0.016 |
| 110 UNM | 102 | 0.0433 | 0.082 | 0.078 | 0.0957 | 0.022 | 0.018 | 0.012 | 0.008 | 0.012 | 0.008 | 0.016 |
| 120 UNM | 102 | 0.0472 | 0.092 | 0.088 | 0.1068 | 0.025 | 0.020 | 0.016 | 0.012 | 0.016 | 0.010 | 0.020 |
| 140 UNM | 85 | 0.0551 | 0.103 | 0.097 | 0.1197 | 0.027 | 0.022 | 0.016 | 0.012 | 0.016 | 0.010 | 0.020 |
Materials
- Head style, material and finish are assembly-design decisions — specify head, material, finish and slot quality expectations together at RFQ
Ordering & documentation
Documents
Shipments of ASME B18.11 Slotted Head Miniature Screws — Fillister / Pan / Flat Head Dimensions (30 UNM – 140 UNM) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ASME B18.11 Slotted Head Miniature Screws — Fillister / Pan / Flat Head Dimensions (30 UNM – 140 UNM) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (ASME B18.11 Slotted Head Miniature Screws — Fillister / Pan / Flat Head Dimensions (30 UNM – 140 UNM)), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Minimum order quantity for asme b18.11 slotted head miniature screws — fillister / pan / flat head dimensions (30 unm – 140 unm) is 10,000 pieces (applies to the standard sizes and finishes for asme b18.11 slotted head miniature screws — fillister / pan / flat head dimensions (30 unm – 140 unm); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for asme b18.11 slotted head miniature screws — fillister / pan / flat head dimensions (30 unm – 140 unm) run 3–7 days. Quantities or variants of asme b18.11 slotted head miniature screws — fillister / pan / flat head dimensions (30 unm – 140 unm) outside the standard range are confirmed at quotation.
Storage & shipping
ASME B18.11 Slotted Head Miniature Screws — Fillister / Pan / Flat Head Dimensions (30 UNM – 140 UNM) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store asme b18.11 slotted head miniature screws — fillister / pan / flat head dimensions (30 unm – 140 unm) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
Fillister, pan or 100° flat head for a miniature assembly — and what does the 100° countersink angle change?
The three heads trade height against bearing and driver access. Fillister is the tall, narrow precision head: its cylindrical sides give maximum head height for wrenching and seating depth but it stands proud — right where an instrument bezel has room and the screw may need frequent service. Pan is shorter and broader: the panel-hardware default in electronics, better bearing spread for the same screw, less head height to budget, and the easiest slot to drive in volume assembly. Flat is the flush answer — and its countersink angle is the detail that catches drawings: ASME B18.11 uses approximately 100°, not the 82° of inch machine screws or the 90° of metric — so the mating countersink must be spec'd to match (the chart's Av full-cone column sizes it) or the head seats rim-only, losing both flushness and bearing. One more column matters at this scale: the flat-head table's body-diameter note (source Note 1) bounds the unthreaded shank between the max major and min pitch diameters — at 0.02 in-scale screws there is no room for a sloppy body, so parts made off-spec pass by eye and fail by gauge. Practical selection: budget head height first (flat < pan < fillister), then driver access and service frequency; specify material, finish and slot quality at RFQ, and pair threads from the ASME B1.10M UNM page.
What is the MOQ and lead time for threaded parts on this standard?
The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common thread sizes on this standard are widely stocked; confirm the exact schedule against quantity and size mix at quotation.
What is the MOQ and lead time for ASME B18.11 Slotted Head Miniature Screws — Fillister / Pan / Flat Head Dimensions (30 UNM – 140 UNM)?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for ASME B18.11 Slotted Head Miniature Screws — Fillister / Pan / Flat Head Dimensions (30 UNM – 140 UNM) state?
State the full designation (ASME B18.11), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Related knowledge
- Thread-Forming vs Thread-Cutting vs Thread-Rolling Self-Tapping Screws: What the Evidence Settles on Base Material
- Screw Family Selection by Base Material: Wood, Machine and Self-Tapping Threads, Engagement and Coating
- Hex Bolts vs Socket Head Cap Screws: What the Evidence Settles on Strength, Clearance and Cost
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your ASME B18.11 Slotted Head Miniature Screws — Fillister / Pan / Flat Head Dimensions (30 UNM – 140 UNM) inquiry
- ✓ Identify the screw type and standard, including head style and drive recess.
- ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
- ✓ State the material/property class, substrate material and thickness, and required coating or finish.
- ✓ Describe installation, locking or removal requirements, quantity and destination.
- ✓ Factory-direct pricing for your ASME B18.11 Slotted Head Miniature Screws — Fillister / Pan / Flat Head Dimensions (30 UNM – 140 UNM)
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support