ISO 2009 Slotted Countersunk Flat Head Screws

ISO 2009 slotted countersunk flat head screws, M1.6 to M10 — the metric counterpart of DIN 963 with the full collected 10-size table: head-cone geometry, slot limits and thread lengths with the small-size footnote.

Last updated: 2026-11

Request a Quote

ISO 2009 Slotted Countersunk Flat Head Screws in an industrial setting
Illustrative image redrawn from real ISO 2009 Slotted Countersunk Flat Head Screws product references — not a photograph of stocked items.

Specifications

ISO 2009 is the slotted countersunk flat head screw: a flat-top head with a 90-degree cone that seats flush in a matching countersink, driven by a simple slot. It is the metric successor designation to DIN 963 — the collected page states the substitution directly — so drawings calling DIN 963 are filled from ISO 2009 stock at the same cone geometry. Flush seating is the whole point of the choice: where a pan or cheese head must stand proud of the surface, the countersunk head disappears into it, which is why this head form dominates assemblies with sliding or contacting surfaces — machine ways, cover plates under moving parts, fitments where nothing may snag. The collected table runs M1.6 to M10 across three block tables and tabulates per size: pitch P, the a runout and x thread-end lash limits, the head system as two distinct diameters — the theoretical d k max that the unbroken cone would reach, and the actual d k with max=nominal / min limits, the circle that seats on the countersink rim — plus head height k, slot width n with Nominal / max / min limits, slot depth t with min/max limits, the r fillet and the thread length b ladder (15 to 40 mm). At the small end the table carries the standard's footnote: minimum lengths only with thread up to near the head. Materials, property classes and finishes are not printed by the collected specification and follow the drawing callout.

Standard ISO 2009 — slotted countersunk flat head screws (collected page notes it replaces DIN 963)
Series M1.6 – M10 (10 sizes across three block tables)
Tabulated geometry Per size: pitch P, runout a max, head diameter d k theoretical max and actual (max=nominal / min), head height k max=nominal, slot width n (Nominal / max / min), slot depth t (max / min), fillet r max, thread-end lash x max, thread length b
Dimensions at M3 d k theoretical max 6.3 / actual max=nominal 5.5 / min 5.2; k max=nominal 1.65; n nominal 0.6 (max 0.8 / min 0.66); t max 0.85 / min 0.6; a max 1; x max 1.25; b 19
Dimensions at M6 d k theoretical max 12.6 / actual max=nominal 11.3 / min 10.87; k max=nominal 3.3; n nominal 1.6 (max 1.91 / min 1.66); t max 1.6 / min 1.2; a max 2; x max 2.5; b 28
Dimensions at M10 d k theoretical max 20 / actual max=nominal 18.3 / min 17.78; k max=nominal 5; n nominal 2.5 (max 2.81 / min 2.56); t max 2.6 / min 2; a max 3; x max 3.8; b 40
Thread-length footnote Per the collected table: minimum lengths — footnote 1) only with thread up to near the head
Materials / strength Not tabulated by the collected specification — per RFQ (property class and finish per drawing callout)

Materials

  • Material, property class and finish specified per RFQ — the collected specification table covers geometry only

Ordering & documentation

Documents

Shipments of ISO 2009 Slotted Countersunk Flat Head Screws are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 2009 Slotted Countersunk Flat Head Screws orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ISO 2009 Slotted Countersunk Flat Head Screws), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for iso 2009 slotted countersunk flat head screws is 10,000 pieces (applies to the standard sizes and finishes for iso 2009 slotted countersunk flat head screws; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for iso 2009 slotted countersunk flat head screws run 3–7 days. Quantities or variants of iso 2009 slotted countersunk flat head screws outside the standard range are confirmed at quotation.

Storage & shipping

ISO 2009 Slotted Countersunk Flat Head Screws are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 2009 slotted countersunk flat head screws dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

The table lists two head diameters — theoretical and actual. Which one sizes my countersink?

The theoretical d k max is where the perfect 90-degree cone would intersect the surface plane — an idealisation used to cut the countersink tool. The actual d k band (for example max=nominal 5.5 / min 5.2 at M3) is the real head rim after manufacture, and it is always smaller than theoretical because the head is truncated where the slot depth and edge limits bite. Practical rule: cut the countersink to the theoretical diameter so the actual head rim lands just below the surface, then verify flushness against the min column — a countersink cut to the actual max instead will leave the theoretical-cone edge standing proud at the tolerance extremes.

How does ISO 2009 relate to DIN 963 and the cross-recessed ISO counterparts?

The collected page prints the mapping directly: ISO 2009 replaces DIN 963 — same slotted countersunk family, so a DIN 963 drawing callout is satisfied by ISO 2009 stock at matching geometry. The geometry in the collected table matches the DIN 963 table on this site size for size, which is what lets the substitution hold without a drawing change. If your assembly is power-driven and you want cam-out resistance instead of a plain slot, the cross-recessed counterpart (ISO 7046-1, H and Z recesses) shares the same head-cone envelope — the decision is drive tooling, not seating geometry.

What is the MOQ and lead time for these screws?

Minimum order quantity is 10,000 pieces per item. Stocked sizes ship in 3–7 days; non-stock diameters, lengths or finishes are quoted with a confirmed schedule. Common sizes in this designation are widely stocked — confirm the exact schedule against quantity and size mix at quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ISO 2009 Slotted Countersunk Flat Head Screws inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your ISO 2009 Slotted Countersunk Flat Head Screws
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.