ISO 7048 Cross-Recessed Cheese Head Screws
ISO 7048 cross-recessed cheese head screws M2,5 to M8 — the tall cylindrical head with a cross recess, with the collected a/b/dk/da/k/r/x geometry rows and the unlegended cross-recess numeral row.
Last updated: 2026-11
Specifications
The cheese head buys head height for slot depth: a tall cylindrical head with parallel sides gives the cross recess more depth to bite, so it survives higher driving torque than a pan head of the same nominal — and it needs a taller counterbore when it must sit below surface. The collected ladder covers M2,5 to M8 with thread end a max., thread engagement b min. (25 at the small sizes, 38 from M4 up), head diameter dk max. (4,5 → 13), abutment da max., head height k max. (1,8 → 5), fillet r min. and thread runout x max. The final m row (1/2/2/2/3/3) is unlegended on the collected page — read as the cross-recess numeral per size and flagged verbatim; confirm the recess number per RFQ if your assembly tooling is size-specific. Property class and finish are not tabulated — per RFQ.
| Standard | ISO 7048 — cross-recessed cheese head screws (H or Z recess per drawing) |
|---|---|
| Size range | M2,5 – M8 in the collected ladder |
| Head geometry | dk max. 4,5 → 13 mm; k max. 1,8 → 5 — tall cylindrical head, parallel sides |
| Thread engagement | b min.: 25 (M2,5/M3) → 38 (M4 – M8) |
| Flagged verbatim | the m row (1 / 2 / 2 / 2 / 3 / 3) is unlegended — read as the cross-recess numeral, confirm per RFQ |
| Material / class / finish | Not tabulated by the collected specification — per RFQ |
| thread d | M2,5 | M3 | M4 | M5 | M6 | M8 |
|---|---|---|---|---|---|---|
| a max. | 0,9 | 1 | 1,4 | 1,6 | 2 | 2,5 |
| b min. | 25 | 25 | 38 | 38 | 38 | 38 |
| dk max. | 4,5 | 5,5 | 7 | 8,5 | 10 | 13 |
| da max. | 3,1 | 3,6 | 4,7 | 5,7 | 6,8 | 9,2 |
| k max. | 1,8 | 2 | 2,6 | 3,3 | 3,9 | 5 |
| r min. | 0,1 | 0,1 | 0,2 | 0,2 | 0,25 | 0,4 |
| x max. | 1,1 | 1,25 | 1,75 | 2 | 2,5 | 3,2 |
| m | 1 | 2 | 2 | 2 | 3 | 3 |
- Row 8 (m): the final m row (1 / 2 / 2 / 2 / 3 / 3) is unlegended on the collected page; read as the cross-recess numeral per size - confirm per RFQ before tooling
Materials
- Property class and finish specified per RFQ — machine-thread cheese heads commonly run class 4.8/8.8 steel; state the recess type (H or Z) and any stainless or finish requirement at quotation
Ordering & documentation
Documents
Shipments of ISO 7048 Cross-Recessed Cheese Head Screws are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 7048 Cross-Recessed Cheese Head Screws orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (ISO 7048 Cross-Recessed Cheese Head Screws), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Minimum order quantity for iso 7048 cross-recessed cheese head screws is 10,000 pieces (applies to the standard sizes and finishes for iso 7048 cross-recessed cheese head screws; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for iso 7048 cross-recessed cheese head screws run 3–7 days. Quantities or variants of iso 7048 cross-recessed cheese head screws outside the standard range are confirmed at quotation.
Storage & shipping
ISO 7048 Cross-Recessed Cheese Head Screws are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 7048 cross-recessed cheese head screws dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
Cheese head or pan head — when does the extra head height pay off?
Torque and clearance trade-offs. The cheese head's parallel sides give the cross recess real depth, so it takes more driver torque before cam-out — the pick for small machine screws driven into metal threads where you want the head low-profile but not headless. The pan head is shallower but stronger over the top; the countersunk hides flush. The collected ISO 7048 ladder (M2,5 – M8, dk max. 4,5 → 13, k max. 1,8 → 5) gives you the counterbore numbers: head height runs roughly 40% of diameter, noticeably taller than a pan head of the same size — plan the pocket accordingly. Two reading notes: thread engagement b min. is 25 mm at M2,5/M3 and 38 from M4 up, and the final m row is unlegended in the capture — it reads as the cross-recess numeral (1/2/2/2/3/3), which is flagged rather than asserted; confirm recess type and number per RFQ if your driver tooling is fixed. Class and finish per RFQ.
What is the MOQ and lead time for ISO 7048 Cross-Recessed Cheese Head Screws?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for ISO 7048 Cross-Recessed Cheese Head Screws state?
State the full designation (ISO 7048), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Related knowledge
- Thread-Forming vs Thread-Cutting vs Thread-Rolling Self-Tapping Screws: What the Evidence Settles on Base Material
- Screw Family Selection by Base Material: Wood, Machine and Self-Tapping Threads, Engagement and Coating
- Hex Bolts vs Socket Head Cap Screws: What the Evidence Settles on Strength, Clearance and Cost
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your ISO 7048 Cross-Recessed Cheese Head Screws inquiry
- ✓ Identify the screw type and standard, including head style and drive recess.
- ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
- ✓ State the material/property class, substrate material and thickness, and required coating or finish.
- ✓ Describe installation, locking or removal requirements, quantity and destination.
- ✓ Factory-direct pricing for your ISO 7048 Cross-Recessed Cheese Head Screws
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support