DIN 964 Slotted Raised Countersunk Machine Screws

Slotted raised countersunk oval head machine screws per DIN 964 — current norm DIN EN ISO 2010 — M1 to M10 in steel class 4.8, A2/A4 stainless or brass, thread 6g. The oval-head compromise: flush conical seat with a low exposed crown, driven by a flat blade.

Last updated: 2026-11

Request a Quote

DIN 964 Slotted Raised Countersunk Machine Screws in an industrial setting
Illustrative image redrawn from real DIN 964 Slotted Raised Countersunk Machine Screws product references — not a photograph of stocked items.

Specifications

The raised countersunk oval head seats its conical underside in the standard 90° countersink and lets a shallow crowned dome rise above the surface — a finish that clears slightly proud covers and paint films while keeping the flush screw's locating behaviour. This is the slotted version: a single blade recess, the traditional callout in instrument and electrical work. The collected standard table runs M1 through M10 in steel class 4.8, A2/A4 stainless or brass, thread tolerance 6g. At M4 the head seats at 7.5 mm maximum diameter with a raised-face parameter f of approximately 1 mm and a 1.0 mm slot; at M1 the screw is fully threaded. DIN 964's current norm is DIN EN ISO 2010. Its cross recessed counterpart is DIN 966/ISO 7047; the pure flush alternative in the same drive is DIN 963/ISO 2009.

Standard DIN 964 — slotted raised countersunk (oval) head screw; current norm DIN EN ISO 2010
Size range M1 – M10
Dimensions at M4 dk (head diameter) nominal=max 7.5 mm (min 7.14 mm); k (head height) max 2.2 mm; f (raised face) approx 1 mm; n (slot width) nominal 1.0 mm (max 1.2 mm); r max 0.4 mm; P 0.7 mm
Thread length Fully threaded at M1; b min 15 mm at M1.2 up to 40 mm at M10
Strength / materials Steel 4.8; stainless A2, A4; brass
Thread 6g
dk at M4 nominal=max 7,5 (min 7,14)
k at M4 max 2,2
f at M4 approx 1
n at M4 nominal 1 (min 1,06/max 1,2)
r at M4 max 0,4
b at M4 min 22
b at M4 'full thread' at M1

Materials

  • Steel
  • Stainless steel
  • Brass

Ordering & documentation

Documents

Shipments of DIN 964 Slotted Raised Countersunk Machine Screws are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 964 Slotted Raised Countersunk Machine Screws orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 964 Slotted Raised Countersunk Machine Screws), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for din 964 slotted raised countersunk machine screws is 10,000 pieces (applies to the standard sizes and finishes for din 964 slotted raised countersunk machine screws; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 964 slotted raised countersunk machine screws run 3–7 days. Quantities or variants of din 964 slotted raised countersunk machine screws outside the standard range are confirmed at quotation.

Storage & shipping

DIN 964 Slotted Raised Countersunk Machine Screws are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 964 slotted raised countersunk machine screws dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Raised countersunk or flush countersunk — when does the oval head pay off?

When the joint wants most of a flush seat but cannot guarantee a perfect one. The conical underside of DIN 964 locates in the same countersink as DIN 963, so tooling carries over unchanged; the crown above the surface tolerates slight misalignment or countersink depth variation that would leave a flush head sitting uneven, and it clears paint films, labels and sliding covers a flush edge would catch on. The trade-offs are the visible dome and a bearing circle slightly smaller than a true flush seat. For driven assembly with powered drivers, the cross recessed version of the same idea is DIN 966.

What head-height figures apply to the larger DIN 964 sizes?

The tabulated figures are reliable through M4, and the figures quoted above are verbatim from them. From M5 up, the head-height and raised-face rows' values appear transposed under the wrong labels in the available table — so this page carries no k or f figure for M5–M10 rather than guess between them. Larger sizes in this designation are confirmed against the standard table at quotation.

What is the MOQ and lead time for these machine screws?

Minimum order quantity is 10,000 pieces per item. Stocked sizes ship in 3–7 days; non-stock diameters, lengths or finishes are quoted with a confirmed schedule. Common sizes in this designation are widely stocked — confirm the exact schedule against quantity and size mix at quotation.

What should an RFQ for these machine screws state?

State the standard designation (for example DIN 965, DIN 964, DIN 966 — or the ISO designation your drawing prints, such as ISO 7046, ISO 2010 or ISO 7047), thread size and pitch, length and head dimension, strength class or material (such as 4.8, A2-70, A4-80 or brass), finish (black oxide, zinc plated, or plain), required certificates such as a mill test report per EN 10204 3.1, and quantity per size — plus destination country.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 964 Slotted Raised Countersunk Machine Screws inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your DIN 964 Slotted Raised Countersunk Machine Screws
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.