BS 4190 Table 11 — ISO Metric Hexagon Head Screws, Faced Under Head Only

BS 4190-2001 table 11, ISO metric hexagon head screws faced under head only, M6 to (M68): pitch, diameter, across flats and corners, head height, fillet, washer face and chamfer ladders — the heavy-series British metric hex screw.

Last updated: 2026-11

Request a Quote

BS 4190 Table 11 — ISO Metric Hexagon Head Screws, Faced Under Head Only in an industrial setting
Illustrative image redrawn from real BS 4190 Table 11 — ISO Metric Hexagon Head Screws, Faced Under Head Only product references — not a photograph of stocked items.

Specifications

BS 4190 is the British heavy-series hexagon standard, and its table 11 covers the variant faced under the head only — no washer face, just a machined bearing surface — in the large metric sizes the general ISO 4014-family pages stop short of. The collected table runs M6 through (M68) in two segments (M6-(M33) and M36-(M68)): pitch P (1.0 at M6 to 3.5-class at the top end), diameter d max/min, across flats s max/min, across corners e max/min, head height k max/min, fillet radius R max/min, and the washer-face-adjacent rows dw and c marked Ref., plus runout a. This is the ladder for heavy structural and plant hex screws in the sizes and "faced under head only" finish that British practice orders as BS 4190 — heavier heads than the ISO equivalents at the same nominal size.

Standard / scope BS 4190-2001 table 11 — ISO metric hexagon head screws, faced under head only, M6 to (M68), non-preferred sizes parenthesized as printed
Pitch P 1.0 (M6) to 3.5-class at (M68), per size as the P row prints
Width across flats s / corners e Per-size max/min ladders across both segments as printed (e.g. s nominal 10 at M6 through the heavy ladder at the large sizes)
Head height k / fillet R k max/min and R max/min rows per size
dw / c (Ref.) Washer-face-adjacent bearing and chamfer rows marked Ref. — the "faced under head only" feature
Not tabulated Property classes, lengths, finishes — per RFQ
BS 4190-2001 table 11 — ISO metric hexagon head screws, faced under head only, M6-M39 (table 1 of 1)mm. Salvaged size-designation header rows (two segments, 11 + 10 columns) used as size column headers. Attribute-label table positionally paired with two numeric grids; values untouched.
AttributeSub-labelNoteM6M8M10M12M16M20(M22)M24(M27)M30(M33)M36(M39)M42(M45)M48(M52)M56(M60)M64(M68)
PP11.251.51.7522.52.5333.53.5444.54.5555.55.566
dd6.488.5810.5812.716.720.8422.8424.8427.8430.8434374043464953.257.261.265.269.2
dd5.527.429.4211.315.319.1621.1623.1626.1629.1632353841444750.854.858.862.866.8
ss1013171924303236414650556065707580859095100
ss9.6412.5716.5718.4823.1629.16313540454953.858.863.868.873.878.883.688.693.698.6
ee11.51519.621.927.734.636.941.647.353.157.763.569.375.180.886.692.498.1103.9109.7115.5
ee10.8914.218.7220.8826.1732.9535.0339.5545.250.8555.3760.7966.4472.0977.7483.3989.0494.47100.12105.77111.42
kk4.245.747.298.2910.2913.3514.3515.3517.3519.4221.4223.4225.4226.4228.4230.4233.535.538.540.543.5
kk3.765.266.717.719.7112.6513.6514.6516.6518.5820.5822.5824.5825.5827.5829.5832.534.537.539.542.5
RR0.40.80.81.251.251.781.781.782.282.282.282.72.72.83.33.84.74.94.94.94.9
RR0.250.40.40.60.60.80.80.8111111.21.21.61.62222
d wd wRef.8.711.515.517.22227.7-33.2-42.7-51.1-60.8-70.8-----
ccRef.0.50.60.60.60.80.8-0.8-0.8-0.8-1-1-----
aa2.533.54566778810101111121219192121
  • Identity note: the acquisition filename reads DIN 906 but the page prints BS 4190 (T11)-2001 (detail.php sid=MjA2NQ==); identity taken from the page title.

Materials

  • BS 4190 hex screws serve heavy plant, structural repair and marine work where British practice still cites the standard; supply is high-tensile steel, self-colour, zinced or hot-dip galvanized. The "faced under head only" finish matters where the joint bears on the bare shank face without a separate washer — the facing gives a flat bearing seat without the raised washer face that spacers and rose joints would rock on. If the drawing says BS 4190, quote it literally; the ISO equivalents are lighter-headed and will not present the same bearing width

Ordering & documentation

Documents

Shipments of BS 4190 Table 11 — ISO Metric Hexagon Head Screws, Faced Under Head Only are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for BS 4190 Table 11 — ISO Metric Hexagon Head Screws, Faced Under Head Only orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (BS 4190 Table 11 — ISO Metric Hexagon Head Screws, Faced Under Head Only), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for bs 4190 table 11 — iso metric hexagon head screws, faced under head only is 10,000 pieces (applies to the standard sizes and finishes for bs 4190 table 11 — iso metric hexagon head screws, faced under head only; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for bs 4190 table 11 — iso metric hexagon head screws, faced under head only run 3–7 days. Quantities or variants of bs 4190 table 11 — iso metric hexagon head screws, faced under head only outside the standard range are confirmed at quotation.

Storage & shipping

BS 4190 Table 11 — ISO Metric Hexagon Head Screws, Faced Under Head Only are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store bs 4190 table 11 — iso metric hexagon head screws, faced under head only dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

When would BS 4190 be ordered instead of the ISO hex screw standards?

Three cases: the drawing or the asset's maintenance manual literally cites BS 4190 (common on British-built heavy plant, dockside and waterworks equipment); the joint needs the heavier head and larger bearing dimensions at a size where the ISO ladder stops or thins out (this table runs to (M68)); or the "faced under head only" variant is wanted where a washer-face would interfere with the mating part. In each case the standard designation carries the order — the geometry here is the verification ladder, and mixing an ISO screw into a BS 4190 callout shows up as a bearing-width and head-height mismatch at fitment.

What does "faced under head only" change compared with a fully washer-faced screw?

The bearing surface. A washer-faced screw carries a raised cylindrical face that seats on its edge; the table 11 variant is simply machined flat under the head. Flat-facing seats anywhere it lands (good against rough or un-machined surfaces and where a washer would be omitted), while the washer face keeps the bearing load on a controlled diameter (good against softer materials and torque-tension repeatability). The dw and c rows marked Ref. here are the residual bearing/chamfer geometry of that flat face. Choose per the mating surface, and keep the choice consistent across a joint — the two variants seat differently under the same torque.

What is the MOQ and lead time for BS 4190 Table 11 — ISO Metric Hexagon Head Screws, Faced Under Head Only?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for BS 4190 Table 11 — ISO Metric Hexagon Head Screws, Faced Under Head Only state?

State the full designation (BS 4190 Table 11 — ISO Metric Hexagon Head Screws, Faced Under Head Only), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your BS 4190 Table 11 — ISO Metric Hexagon Head Screws, Faced Under Head Only inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your BS 4190 Table 11 — ISO Metric Hexagon Head Screws, Faced Under Head Only
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.